Fujitsu MAF3364LC - Enterprise 36.4 GB Hard Drive Manuel utilisateur

C141-E064-03EN

MAF3364LC/LP/MC/MP SERIES

MAE3182LC/LP, MAE3091LC/LP

SERIES

MAG3182LC/LP/MC/MP,

MAG3091LC/LP/MC/MP SERIES

DISK DRIVES

PRODUCT MANUAL

C141-E064-03EN i

REVISION RECORD

Edition Date published Revised contents

01 Nov., 1998

02 May, 1999

03 Oct., 1999 MC/MP types are added.

Specification No.: C141-E064-**EN

The contents of this manual is subject to

change without prior notice.

This page is intentionally left blank.

C141-E064-03EN iii

FOR SAFE OPERATION

Handling of This manual

This manual contains important information for using this product. Read thoroughly before

using the product. Use this product only after thoroughly reading and understanding

especially the section “Important Alert Items” in this manual. Keep this manual handy, and

keep it carefully.

FUJITSU makes every effort to prevent users and bystanders from being injured or from

suffering damange to their property. Use the product according to this manual.

Functional Limitations

There may be certain functional limitations concerning the specifications and functions of the

products covered by this manual depending on the equipment version, especially concerning

the following functions.

Versions in which there functions can be used will be communicated through

“ENGINEERING CHANGE REQUEST/NOTICE”, issued by Fujitsu.

Function Equipment Version Which Supports These Functions

Equipment

Version No. EPROM

Version

No.

Standard INQUIRY Data Product

Revision (ASCII)

READ RAM Command

WRITE RAM Command These commands cannot be used in the current version.

(Proceed to the Copyright Page)

iv C141-E064-03EN

Related Standards

Specifications and functions of products covered by this manual comply with the following

standards.

Standard (Text) No. Name Enacting Organization

ANSI X3.131-1986 American National Standard for

Information Systems—Small Computer

System Interface (SCSI)

American National

Standards Institute

(ANSI)

ANSI X3.131-1994 American National Standard for

Information Systems—Small Computer

System Interface - 2(SCSI-2)

American National

Standards Institute

(ANSI)

X3T9.2/85-52 Rev 4.B COMMON COMMAND SET (CCS)

of the Small Computer

System Interface (SCSI)

American National

Standards Institute

(ANSI)

X3T9.2 855D Rev 12 WORKING DRAFT Information

Technology SCSI-3 Parallel Interface American National

Standards Institute

(ANSI)

X3T10/10T1D Rev 6 Dfaft proposed

American National Standard for

Information Systems—SCSI-3

Fast-20 Parallel Interface

(Fast 20-SCSI)

American National

Standards Institute

(ANSI)

C141-E064-03EN v

PREFACE

This manual describes the MAF3364LC/LP/MC/MP (hereafter, MAF series), MAE3182LC/LP,

MAE3091LC/LP, (hereafter, MAE series), and MAG3182LC/LP/MC/MP, MAG3091LC/LP/MC/MP

(hereafter, MAG series), 3.5-inch fixed disk drives with an embedded SCSI controller.

This manual details the specifications and functions of the above disk drive, and gives the requirements

and procedures for installing it into a host computer system.

This manual is written for users who have a basic understanding of fixed disk drives and their use in

computer systems. The MANUAL ORGANIZATION section describes organization and scope of this

manual. The need arises, use the other manuals.

Chapter 1 GENERAL DESCRIPTION

This chapter introduces the MAF series, MAE series and MAG series disk drives and discusses their

standard features, hardware, and system configuration.

Chapter 2 SPECIFICATIONS

This chapter gives detailed specifications of the MAF series, MAE series and MAG series disk drives

and their installation environment.

Chapter 3 DATA FORMAT

This chapter describes the data structure of the disk, the address method, and what to do about media

defects.

Chapter 4 INSTALLATION REQUIREMENTS

This chapter describes the basic physical and electrical requirements for installing MAF series, MAE

series and MAG series disk drives.

Chapter 5 INSTALLATION

This chapter explains how to install MAF series, MAE series and MAG series disk drives. It includes

the notice and procedures for setting device number and operation modes, mounting the disk drive,

connecting the cables, and confirming drive operation.

Chapter 6 DIAGNOSIS and MAINTENANCE

This chapter describes the automatic diagnosis, and maintenance of the MAF series, MAE series and

MAG series disk drive.

APPENDIX A to D

The appendixes give supplementary information, including the locations of mounting setting terminals

and connectors, a list of setting items, the signal assignments of interface connectors, lists of model

names and product numbers, and SCSI interface functions.

The model numbers have a suffix that describes the electrical requirements of the SCSI interface

between host system and disk drive, the data formatted at the factory and device type.

vi C141-E064-03EN

CONVENTIONS

This manual uses the following conventions for alerts to prevent physical or property damages to users

or by standards.

DANGER

DANGER indicates that personal injury will occur if the user does not perform the procedure

correctly.

WARNING

WARNING indicates that personal injury could occur if the user does not perform the procedure

correctly.

CAUTION

CAUTION indicates that either minor or moderate personal injury may occur if the user does not

perform the procedure correctly.

NOTICE

NOTICE indicates that inconvenience to the user such as damages to the product, equipment, data,

and/or other property may occur if the user does not pay attention or perform the procedure correctly.

IMPORTANT

IMPORTANT indicates information that the helps the user use the product more effectively.

Indicates

This manual indicates;

Decimal number: Indicates as it is.

Hexadecimal number: Indicates as X’17B9’, 17B9h, or 17B9H

Binary number: Indicates as “010”

C141-E064-03EN vii

DISCLAIMER

Failure of the MAF series, MAE series and MAG series intelligent disk drive is defined as a failure

requiring adjustments, repairs, or replacement. Fujitsu is not responsible for drive failures caused by

misuse by the user, poor environmental conditions, power trouble, host problems, cable failures, or any

failure not caused by the drive itself.

The suffix of the model name of the disk drive varies depending on the electrical requirements,

capacity, and data format at factory shipment of the SCSI, i.e., the interface for connecting the three

device types or host system and the disk drives (Note 1). However, in this manual, the typical model

names (Note 2) are used unless otherwise noted. These disk drives may be called intelligent disk

drives (IDD), drives, or devices in this manual.

Note 1: Model names

M AF 3 364 LC

Interface types LC: LVD, 16-bit SCSI SCA2 connector

LP: LVD, 16-bit SCSI 68 pin connector

MC: LVD, 16-bit SCSI SCA2 connector 160MHz

transfer MP: LVD, 16-bit SCSI 68 pin connector 160MHz

transfer

Formatted capacity (100 MB units)

Disk size 3: 3.5 inch

Type AE: 1-inch height (7,200rpm)

AF: 1.6-inch height (10,025rpm)

AG: 1-inch height (10,025rpm)

Note 2: Type model name

Type model name Model name

MAE3182 MAE3182LC, MAE3182LP

MAE3091 MAE3091LC, MAE3091LP

MAF3364 MAF3364LC, MAF3364LP, MAF3364MC, MAF3364MP

MAG3182 MAG3182LC, MAG3182LP, MAG3182MC, MAG3182MP

MAG3091 MAG3091LC, MAG3091LP, MAG3091MC, MAG3091MP

viii C141-E064-03EN

Important Alert Items

Important Alert Messages

The important alert messages in this manual are as follows:

A hazarous situation could result in minor or moderate personal injury if

the user does not perform the procedure correctly. This alert signal also

indicates that damages to the produt or other property, may occur if the

user does not perform the procedure correctly.

Task Alert message Page

Mounting Installation Heat

An air flow with an adequate wind velocity must be maintained

to deal with much heat generated from the MAF3364xx.

Reference value: An air flow with a wind velocity of more than

0.5 m/s is required in an environment at 40°C,

and an air flow with a wind velocity of more

than 1.0m/s in an environment at 45°C (Center

of DE cover 55°C).

Data loss

1. The user must not change the setting of terminals not

described in this section. Do not change setting status set at

factory shipment.

2. Do not change the setting of terminals except following

setting pins during the power is turned on.

• Write protect: CN2 9-10

3. To short the setting terminal, use the short plug attached

when the device is shipped from the factory.

Damage

1. Check that system power is off before connecting or

disconnecting cables.

2. Do not connect or disconnect cables when power is on.

Data loss

When the SEND DIAGNOSTIC command terminates with the

CHECK CONDITION status, the INIT must collect the error

information using the REQUEST SENSE command. The

RECEIVE DIAGNOSTIC RESULTS command cannot read out

the error information detected in the self-diagnostics.

Damage

Do not open the DE in the field because it is completely sealed.

Data loss

Save data stored on the disk drive before requesting repair.

Fujitsu does not assume responsibility if data is destroyed

during servicing or repair.

4-10

5-5

5-11

6-4

6-5

6-6

C141-E064-03EN ix

MANUAL ORGANIZATION

PRODUCT

MANUAL

(This manual)

1. General Description

2. Specifications

3. Data Format

4. Installation Requirements

5. Installation

6. Diagnostics and Maintenance

SCSI Physical

Interface

Specifications

1. SCSI Bus

2. SCSI Message

3. SCSI Bus Error Recovery Processing

SCSI Logical

Interface

Specifications

1. Command Processing

2. Data Buffer Management

3. Command Specification

4. Sense Data and error Recovery Procedure

5. Disk Medium Management

Maintenance

Manual 1. Specifications and Equipment Configuration

2. Maintenance and Diagnostics

3. Error Analysis

4. Removal and Replacement Procedures

5. Principle of Operation

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Stockage

Fujitsu

Fujitsu ETERNUS DX60 S2 Manuel utilisateur

Fujitsu

Fujitsu MHU2100AT Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 S2 Manuel utilisateur

Fujitsu

Fujitsu MPB3021AT Manuel utilisateur

Fujitsu

Fujitsu MHS2020AT Manuel utilisateur

Fujitsu

Fujitsu MHJ2181AT Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX8100 S3 Manuel technique

Fujitsu

Fujitsu MAV2036RC - 36.7 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu MPC3096AT - Desktop 9.7 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu MAA3182SC Manuel d'installation et d'exploitation

Fujitsu

Fujitsu P3AM-5382-03ENZ0 Comment utiliser

Fujitsu

Fujitsu GP5-HD9G4 Manuel utilisateur

Fujitsu

Fujitsu MPE3XXXAE Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX S5 Series Manuel utilisateur

Fujitsu

Fujitsu ETERNUS AF250 S2 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS LT160 Manuel utilisateur

Fujitsu

Fujitsu MHW2040BS Manuel utilisateur

Fujitsu

Fujitsu MAY2036RC Product/ Manuel utilisateur

Fujitsu

Fujitsu MHT2080BH Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY SX910 S1 Manuel utilisateur

Fujitsu

Fujitsu MHV2040AH - Mobile - Hard Drive Manuel utilisateur

Fujitsu

Fujitsu MAS3184NC/NP Manuel utilisateur

Fujitsu

Fujitsu GP5-HDH8B Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur