Fujitsu MHJ2181AT Manuel utilisateur

C141-E088-03EN

MHJ2181AT, MHK2120AT,

MHK2090AT, MHK2060AT

DISK DRIVES

PRODUCT MANUAL

C141-E088-03EN

FOR SAFE OPERATION

Handling of This Manual

This manual contains important information for using this product. Read thoroughly before using

the product. Use this product only after thoroughly reading and understanding especially the

section “Important Alert Items”in this manual. Keep this manual handy, and keep it carefully.

FUJITSU makes every effort to prevent users and bystanders from being injured or from suffering

damage to their property. Use the product according to this manual.

IMPORTANT NOTE TO USERS

READ THE ENTIRE MANUAL CAREFULLY BEFORE USING THIS PRODUCT.

INCORRECT USE OF THE PRODUCT MAY RESULT IN INJURY OR DAMAGE TO

USERS, BYSTANDERS OR PROPERTY.

While FUJITSU has sought to ensure the accuracy of all information in this manual, FUJITSU

assumes no liability to any party for any damage caused by any error or omission contained in this

manual, its updates or supplements, whether such errors or omissions result from negligence,

accident, or any other cause. In addition, FUJITSU assumes no liability with respect to the

application or use of any product or system in accordance with the descriptions or instructions

contained herein; including any liability for incidental or consequential damages arising therefrom.

FUJITSU DISCLAIMS ALL WARRANTIES REGARDING THE INFORMATION

CONTAINED HEREIN, WHETHER EXPRESSED, IMPLIED, OR STATUTORY.

FUJITSU reserves the right to make changes to any products described herein without further

notice and without obligation.

The contents of this manual may be revised without prior notice.

The contents of this manual shall not be disclosed in any way or reproduced in any media without

the express written permission of Fujitsu Limited.

This page is intentionally left blank.

C141-E088-03EN

Revision History

(1/1)

Edition Date Revised section (*1)

(Added/Deleted/Altered) Details

01 1999-07-20 — —

1999-08-30

1999-10-15

Chapter 1 (Altered)

Chapter 4 (Altered)

Chapter 1 (altered)

• Shock and vibration specifications for

MHJ series added to the Table 1.6.

• 60 servo frames revolution changed to

66 servo frames revolution in the

Figure 4.7.

• Specifications of Table 1.1 is partly

modified.

• The value of duration for MHK series

on the Table 1.6 is modified.

*1 Section(s) with asterisk (*) refer to the previous edition when those were deleted.

This page is intentionally left blank.

C141-E088-03EN i

Preface

This manual describes the MHJ Series and MHK Series, 2.5-inch hard disk drives.

These drives have a built-in controller that is compatible with the ATA interface.

This manual describes the specifications and functions of the drives and explains in

detail how to incorporate the drives into user systems. This manual assumes that

the reader has a basic knowledge of hard disk drives and their implementations in

computer systems.

This manual consists of seven chapters and sections explaining the special

terminology and abbreviations used in this manual:

Overview of Manual

CHAPTER 1 Device Overview

This chapter gives an overview of the MHJ Series and MHK Series and describes

their features.

CHAPTER 2 Device Configuration

This chapter describes the internal configurations of the MHJ Series and MHK

Series and the configuration of the systems in which they operate.

CHAPTER 3 Installation Conditions

This chapter describes the external dimensions, installation conditions, and switch

settings of the MHJ Series and MHK Series.

CHAPTER 4 Theory of Device Operation

This chapter describes the operation theory of the MHJ Series and MHK Series.

CHAPTER 5 Interface

This chapter describes the interface specifications of the MHJ Series and MHK

Series.

CHAPTER 6 Operations

This chapter describes the operations of the MHJ Series and MHK Series.

Terminology

This section explains the special terminology used in this manual.

Abbreviation

This section gives the meanings of the definitions used in this manual.

Preface

ii C141-E088-03EN

Conventions for Alert Messages

This manual uses the following conventions to show the alert messages. An alert

message consists of an alert signal and alert statements. The alert signal consists of

an alert symbol and a signal word or just a signal word.

The following are the alert signals and their meanings:

This indicates a hazarous situation could result in

minor or moderate personal injury if the user does

not perform the procedure correctly. This alert signal

also indicates that damages to the product or other

property, may occur if the user does not perform the

procedure correctly.

This indicates information that could help the user

use the product more efficiently.

In the text, the alert signal is centered, followed below by the indented message. A

wider line space precedes and follows the alert message to show where the alert

message begins and ends. The following is an example:

(Example)

Data corruption: Avoid mounting the disk drive near strong

magnetic sources such as loud speakers. Ensure that the disk drive is

not affected by external magnetic fields.

The main alert messages in the text are also listed in the “Important Alert Items.”

Operating Environment

This product is designed to be used in offices or computer rooms.

For details regarding the operating environment of use, refer to the

(Cnnn-Xnnn) and the

(Cnnn-Xnnn).

Attention

Please forward any comments you may have regarding this manual.

To make this manual easier for users to understand, opinions from readers are

needed. Please write your opinions or requests on the Comment at the back of this

manual and forward it to the address described in the sheet.

Preface

C141-E088-03EN iii

Liability Exception

“Disk drive defects”refers to defects that involve adjustment, repair, or

replacement.

Fujitsu is not liable for any other disk drive defects, such as those caused by user

misoperation or mishandling, inappropriate operating environments, defects in the

power supply or cable, problems of the host system, or other causes outside the

disk drive.

This page is intentionally left blank.

C141-E088-03EN v

Important Alert Items

Important Alert Messages

The important alert messages in this manual are as follows:

A hazardous situation could result in minor or moderate personal

injury if the user does not perform the procedure correctly. Also,

damage to the predate or other property, may occur if the user does not

perform the procedure correctly.

Task

Alert message

Page

Normal Operation

Data corruption: Avoid mounting the disk near strong

magnetic soures such as loud speakers. Ensure that the disk

drive is not affected by extrnal magnetic fields.

Stastic: When handling the device, disconnect the body

ground (500 k

Ω

or greater). Do not touch the printed circuit

board, but hold it by the edges.

3-8

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Stockage

Fujitsu

Fujitsu GP5-HD4E71 Manuel utilisateur

Fujitsu

Fujitsu MPD3XXXAT Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS... Manuel utilisateur

Fujitsu

Fujitsu ETERNUS AF250 S2 Instructions de montage

Fujitsu

Fujitsu MHV2040AH - Mobile - Hard Drive Manuel utilisateur

Fujitsu

Fujitsu IRF-1S series Manuel utilisateur

Fujitsu

Fujitsu Eternus CS800 S2 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS Multipath Driver V2 Manuel utilisateur

Fujitsu

Fujitsu MHW2120BK Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX Disk Manuel utilisateur

Fujitsu

Fujitsu MAB3091FC Series Manuel utilisateur

Fujitsu

Fujitsu MBA3073RC SERIES Manuel utilisateur

Fujitsu

Fujitsu GP5-HDH461 Manuel utilisateur

Fujitsu

Fujitsu MAH3182MC SERIES Manuel utilisateur

Fujitsu

Fujitsu ETERNUS CS800 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX100 S4 Mode d’emploi

Fujitsu

Fujitsu PRIMERGY LTO3 Manuel utilisateur

Fujitsu

Fujitsu C141-E282 Manuel utilisateur

Fujitsu

Fujitsu MHV2040BH Manuel utilisateur

Fujitsu

Fujitsu ETERNUS AX Series Mode d’emploi

Fujitsu

Fujitsu MHG2102AT - Mobile 10 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu MHV2040AT - Hard Drive - 40 GB Manuel utilisateur

Fujitsu

Fujitsu MPC3032AT Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 S2 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur