Fujitsu eternus af Manuel utilisateur
FUJITSU Storage
ETERNUS AF, ETERNUS DX
Configuration Guide -Server Connection-
(Fibre Channel) for HP-UX
P3AM-3772-22ENZ0
This page is intentionally left blank.
Preface
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS AF/DX to a server running HP-UX via a Fibre Channel interface.
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS AF/DX, server, OS, Fibre Channel cards, and drivers.
Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as
product trademarks and product names. For storage systems that are supported by the OS, refer to the Server
Support Matrix of the ETERNUS AF/DX.
22nd Edition
March 2020
The Contents and Structure of this Manual
This manual is composed of the following 12 chapters.
•"Chapter 1 Workflow" (page 6)
This chapter describes how to connect the ETERNUS AF/DX to a server.
•"Chapter 2 Checking the Server Environment" (page 8)
This chapter describes which servers can be connected to ETERNUS AF/DX storage systems.
•"Chapter 3 Notes" (page 10)
This chapter describes issues that should be noted when connecting the ETERNUS AF/DX storage systems
and server.
•"Chapter 4 Checking the Server Information" (page 13)
This chapter describes how to check the server's WWN settings.
•"Chapter 5 Setting Up the ETERNUS AF/DX" (page 15)
This chapter describes how to set up the ETERNUS AF/DX storage systems using ETERNUS Web GUI.
•"Chapter 6 Setting Up the Fibre Channel Switches" (page 16)
This chapter describes how to set up the Fibre Channel switches.
•"Chapter 7 Installing Drivers and Setting Up the Server" (page 18)
This chapter describes the driver and server settings.
•"Chapter 8 Checking Connections" (page 21)
This chapter describes how to check the connection status between the server and ETERNUS AF/DX.
•"Chapter 9 Setting the Multipaths" (page 23)
This chapter describes the settings when operating with a multipath configuration.
•"Chapter 10 SAN Boot" (page 27)
This chapter provides notes for SAN Boot.
•"Chapter 11 Storage Migration" (page 28)
This chapter describes the procedures that are related to Storage Migration.
•"Chapter 12 Non-disruptive Storage Migration" (page 37)
This chapter describes the procedures that are related to Non-disruptive Storage Migration.
3
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
Copyright 2020 FUJITSU LIMITED
P3AM-3772-22ENZ0
Table of Contents
Chapter 1 Workflow 6
Chapter 2 Checking the Server Environment 8
2.1 Hardware ....................................................................................................................................... 8
2.2 Operating System (OS)................................................................................................................... 8
2.3 Fibre Channel Cards........................................................................................................................ 8
2.4 Multipath Configuration................................................................................................................. 8
2.5 Integrity VM ................................................................................................................................... 8
2.6 Veritas Volume Manager (VxVM).................................................................................................... 8
2.7 Veritas Cluster Server (VCS) ............................................................................................................ 9
Chapter 3 Notes 10
3.1 ETERNUS AF/DX Setup Notes......................................................................................................... 10
3.2 Fibre Channel Switch Notes.......................................................................................................... 10
3.3 LVM Notes .................................................................................................................................... 11
3.4 HP Serviceguard Notes ................................................................................................................. 12
3.5 HP Integrity VM Notes .................................................................................................................. 12
3.6 Veritas Volume Manager (VxVM) Notes........................................................................................ 12
3.7 Notes for Veritas Volume Manager Dynamic Multipathing (VxVM DMP) ...................................... 12
3.8 Veritas Cluster Server (VCS) Notes ................................................................................................ 12
3.9 Server Startup and Power Supply Control Notes............................................................................ 12
Chapter 4 Checking the Server Information 13
Chapter 5 Setting Up the ETERNUS AF/DX 15
Chapter 6 Setting Up the Fibre Channel Switches 16
Chapter 7 Installing Drivers and Setting Up the Server 18
7.1 Installing the Driver...................................................................................................................... 18
7.2 Setting Up the Server.................................................................................................................... 18
4
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
Copyright 2020 FUJITSU LIMITED
P3AM-3772-22ENZ0
7.2.1 Setting Up the Command Queue Depth ..............................................................................................................18
Chapter 8 Checking Connections 21
8.1 Turning On the Devices ................................................................................................................ 21
8.2 Setting Up the Server to Recognize the Logical Units ................................................................... 21
Chapter 9 Setting the Multipaths 23
9.1 Multipath Configuration Using PV-Links....................................................................................... 23
9.2 Multipath Configuration Using Native Multipath.......................................................................... 24
9.2.1 Setting the I/O Load Balance Policy (load_bal_policy) ........................................................................................24
9.2.2 Enabling ALUA (alua_enabled)...........................................................................................................................25
Chapter 10 SAN Boot 27
Chapter 11 Storage Migration 28
Chapter 12 Non-disruptive Storage Migration 37
Table of Contents
5
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
Copyright 2020 FUJITSU LIMITED
P3AM-3772-22ENZ0
Chapter 1
Workflow
Which documents need to be referred to varies with the connection environment. Refer to the workflow that
follows to determine which documents are required.
Required Documents
•"Server Support Matrix"
•"Server Support Matrix for FC-SWITCH"
•"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS AF/DX
to be connected
•"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"
•"ETERNUS Web GUI User's Guide"
•Manuals supplied with the server, Fibre Channel card, Fibre Channel card driver, and multipath driver
Workflow
Setting Up the ETERNUS AF/DX
Set the various parameters required to operate the ETERNUS AF/DX. Also, check the WWN of the Fibre
Channel card for the server that is required to set the ETERNUS AF/DX.
•"Chapter 4 Checking the Server Information" (page 13)
•"Chapter 5 Setting Up the ETERNUS AF/DX" (page 15)
•Checking the setup and maintenance operations
-"ETERNUS Web GUI User's Guide"
•Setting up the ETERNUS AF/DX
-"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-
NUS AF/DX to be connected
Setting Up the Fibre Channel Switches
If a Fibre Channel switch is to be used, set it up now.
•"Chapter 6 Setting Up the Fibre Channel Switches" (page 16)
•Checking the Fibre Channel switch connection requirements
-"Server Support Matrix for FC-SWITCH"
6
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
Copyright 2020 FUJITSU LIMITED
P3AM-3772-22ENZ0
Installing the Fibre Channel Card Drivers and Setting the Parameters
Install the appropriate driver for the Fibre Channel card being used.
•"Chapter 7 Installing Drivers and Setting Up the Server" (page 18)
•Checking the Fibre Channel card driver versions
-"Server Support Matrix"
Setting Up the Server
Set up the OS to connect to the ETERNUS AF/DX.
•"7.2 Setting Up the Server" (page 18)
Setting Up the Server to Recognize the Logical Units
Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS AF/DX.
•"8.2 Setting Up the Server to Recognize the Logical Units" (page 21)
Setting the Server to Match the System Configuration
Set up the server as required by the system configuration.
•Multipath configurations
-Set PV-Links
•"9.1 Multipath Configuration Using PV-Links" (page 23)
-Set Native Multipath
•"9.2 Multipath Configuration Using Native Multipath" (page 24)
-Veritas Volume Manager Dynamic Multipathing (VxVM DMP) Facility
•"3.6 Veritas Volume Manager (VxVM) Notes" (page 12)
•Volume manager
-Logical Volume Manager (LVM)
•"3.3 LVM Notes" (page 11)
-Veritas Volume Manager
•"3.6 Veritas Volume Manager (VxVM) Notes" (page 12)
Chapter 1 Workflow
7
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
Copyright 2020 FUJITSU LIMITED
P3AM-3772-22ENZ0
Chapter 2
Checking the Server Environment
Connection to servers is possible in the following environments.
Check the "Server Support Matrix" for server environment conditions.
2.1 Hardware
Refer to the "Server Support Matrix".
2.2 Operating System (OS)
Refer to the "Server Support Matrix".
2.3 Fibre Channel Cards
Refer to the "Server Support Matrix".
2.4 Multipath Configuration
Refer to the "Server Support Matrix".
2.5 Integrity VM
Refer to the "Server Support Matrix".
2.6 Veritas Volume Manager (VxVM)
Refer to the "Server Support Matrix".
8
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
Copyright 2020 FUJITSU LIMITED
P3AM-3772-22ENZ0
2.7 Veritas Cluster Server (VCS)
Refer to the "Server Support Matrix".
Chapter 2 Checking the Server Environment
2.7 Veritas Cluster Server (VCS)
9
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
Copyright 2020 FUJITSU LIMITED
P3AM-3772-22ENZ0
Chapter 3
Notes
Note the following issues when connecting the ETERNUS AF/DX to a server.
3.1 ETERNUS AF/DX Setup Notes
•Be sure to set the sub system parameters.
•Ensure that the ETERNUS AF/DX Loop-IDs are set to "Manual".
•The Loop-IDs must be unique within each FC-AL loop, and should be assigned in the ascending order.
•Do not assign 0x7D as an ETERNUS AF/DX Loop-ID.
3.2 Fibre Channel Switch Notes
The Fibre Channel switches that can be connected depend on the connection configuration that is used (the
OS and the ETERNUS AF/DX). Refer to the "Server Support Matrix for FC-SWITCH" before starting.
When a Fibre Channel switch (ETERNUS SN200 series, Brocade series) is to be used between the server and
ETERNUS AF/DX, follow the preparation-in-advance and Fibre Channel switch setup procedures given in the
"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings".
•Set the Fibre Channel switch domain ID, to anything other than "8".
When the domain ID is set to "8", the device cannot be recognized correctly.
•When carrying out maintenance on the Fibre Channel switches, the switch domain ID must be the same
after maintenance as it was before.
•Make certain that reconnection is made to the correct port after carrying out the maintenance of the ETER-
NUS AF/DX by using the same port number as it was used before maintenance.
•Set the link speed of the Fibre Channel switch ports according to the link speeds of the server-side Fibre
Channel cards, as follows:
Combination of devices Set the Fibre Channel switch port link
speed to...
Maximum link speed of Fibre Channel
card
Maximum link speed of Fibre Channel
switch
8Gbit/s 32Gbit/s 8Gbit/s fixed
16Gbit/s 8Gbit/s fixed
8Gbit/s 8Gbit/s fixed
4Gbit/s 4Gbit/s fixed
2Gbit/s 2Gbit/s fixed
10
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
Copyright 2020 FUJITSU LIMITED
P3AM-3772-22ENZ0
Autres manuels pour eternus af
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Fujitsu Stockage
Fujitsu
Fujitsu MPE3XXXAT Manuel utilisateur
Fujitsu
Fujitsu MBB2147RC SERIES Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX60 S3 Manuel utilisateur
Fujitsu
Fujitsu MHV2040AT - Hard Drive - 40 GB Manuel utilisateur
Fujitsu
Fujitsu MHC2032AT Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX60 Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX60 S3 Manuel technique
Fujitsu
Fujitsu MAT3300NC Manuel utilisateur
Fujitsu
Fujitsu MPD3XXXAT Manuel utilisateur
Fujitsu
Fujitsu MPF3XXXAH Manuel utilisateur
Fujitsu
Fujitsu ETERNUS AF S3 Series Mode d’emploi
Fujitsu
Fujitsu ETERNUS LT20 S2 Comment utiliser
Fujitsu
Fujitsu MAT3300NC/NP Product/ Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX60 Manuel utilisateur
Fujitsu
Fujitsu MBA3300 NP SERIES Manuel utilisateur
Fujitsu
Fujitsu MHV2100AH Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX500 S4/DX600 S4 Mode d’emploi
Fujitsu
Fujitsu SLR 50 GBYTE Manuel utilisateur
Fujitsu
Fujitsu GRANPOWER500 TEAMSERVER Series Manuel utilisateur
Fujitsu
Fujitsu ETERNUS LT260 Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur