Fluke 353 Manuel utilisateur

Technical Data

Fluke 355/353

True-rms 2000 A Clamp Meters

High current and

a large jaw, make

these clamps

well suited for

industrial and

utility applications

Confidently take reliable readings

with the true-rms, Fluke 355/353

Clamp Meters; the tools of choice

for high-current measurements

up to 2000 A. The extra-wide

jaw easily clamps around large

conductors typically found in high-

current applications. The rugged

design and CAT IV 600 V, CAT III

1000 V ratings, add an extra ele-

ment of protection when taking

high-powered measurements.

Accurate peak measurements

can be taken using the in-rush

current mode, ideal for motors

and inductive loads. The 355 also

measures voltage and resistance,

making this the most versatile tool

for utilities, electrical contractors,

and industrial service technicians.

•Reliably handle a wide range of high-current

applications with 2000 A ac + dc true-rms,

1400 A ac, and 2000 A dc

•The large 58 mm (2.3 in) jaw capacity is suitable for

large, or multiple conductors

•CAT IV 600 V, CAT III 1000 V rating for added user

protection

•In-rush current measurement captures ‘power-on’

surge current with accuracy and repeatability

•High voltage measurement of 1000 V ac + dc

true-rms, 600 V ac, and 1000 V dc allows users to

perform multiple tests with only one tool (355 only)

•Resistance to 400 kWcoupled with a continuity

beeper, provide the convenience of a multimeter

(355 only)

•Accurately measure frequency up to 1 kHz for

optimum troubleshooting

•Quickly analyze readings using the MIN, MAX, and

AVG functions

•A large backlit display allows for easy visibility in

low-lit areas

•Use the display hold feature to capture readings

even when the display cannot be viewed

•Use the low-pass ﬁlter to smooth out noisy loads

and stabilize readings

N10140

2 Fluke Corporation Fluke 355/353 True-rms 2000 A Clamp Meters

Specifications

Electrical specifications

Current measurement dc and ac 10 Hz to 100 Hz

Range Resolution Accuracy, A Trigger Level for

Inrush

Trigger Level

for Hz

Filter OFF

Trigger Level

for Hz

Filter ON

40 A 10 mA 1.5 % rdg + 15 digits 0.50 A 2.50 A 0.50 A

400 A 100 mA 1.5 % rdg + 5 digits 5.0 A 2.5 A 2.5 A

2000 A;

1400 ac rms

1 A 1.5 % rdg + 5 digits 5 A 8 A 8 A

Crest Factor (50/60 Hz)

Range Crest Factor*

40 A 2 @ 33 A, 2.4 @ 27 A

400 A 2 @ 330 A, 2.4 @ 270 A

2000 A; 1400 ac rms 2 @ 1000 A, 2.4 @ 833 A

*Add 2 % to error spec for CF > 2

Current measurement ac 100.1 Hz to 1 kHz

Range Resolution Accuracy > 10 A Trigger Level for

Inrush

Trigger Level

for Hz

Filter OFF

Trigger Level

for Hz

Filter ON

40 A 10 mA 3.5 % rdg + 15 digits 0.50 A 2.50 A 0.50 A

400 A 100 mA 3.5 % rdg + 5 digits 5.0 A 2.5 A 2.5 A

2000 A;

1400 ac rms

1 A 3.5 % rdg + 5 digits 5 A 8 A 8 A

Voltage measurement (355 only) dc and ac 10 Hz to 100 Hz

600 V and 1000 V ranges have 10 % over range to 660 V and 1100 V respectively.

Range Resolution Accuracy Trigger Level for Hz

Filter OFF

Trigger Level for Hz

Filter ON

4 V 1 mV 1 % rdg + 10 digits 0.050 V 0.050 V

40 V 10 mV 1 % rdg + 5 digits 0.25 V 0.25 V

400 V 100 mV 1 % rdg + 5 digits 6 V 6 V

600 V ac rms 1 V 1 % rdg + 5 digits 6 V 6 V

1000 V dc 1 V 1 % rdg + 5 digits N/A N/A

Voltage measurement (355 only) ac 100.1 Hz to 1 kHz

600 V and 1000 V ranges have 10 % over range to 660 V and 1100 V respectively.

Range Resolution Accuracy Trigger Level for Hz

Filter OFF

Trigger Level for Hz

Filter ON

4 V 1 mV 3 % rdg + 10 digits 0.050 V 0.050 V

40 V 10 mV 3 % rdg + 5 digits 0.25 V 0.25 V

400 V 100 mV 3 % rdg + 5 digits 6 V 6 V

600 V ac rms 1 V 3 % rdg + 5 digits 6 V 6 V

Ohms measurement (355 only)

Range Resolution Accuracy

400 W0.1 W1.5 % + 5 digits

4 kW1 W1.5 % + 5 digits

40 kW10 W1.5 % + 5 digits

400 kW100 W1.5 % + 5 digits

3 Fluke Corporation Fluke 355/353 True-rms 2000 A Clamp Meters

Fluke Corporation

PO Box 9090, Everett, WA USA 98206

Fluke Europe B.V.

PO Box 1186, 5602 BD

Eindhoven, The Netherlands

For more information call:

In the U.S.A. (800) 443-5853 or

Fax (425) 446-5116

In Europe/M-East/Africa +31 (0) 40 2675 200 or

Fax +31 (0) 40 2675 222

In Canada (800) 36-FLUKE or

Fax (905) 890-6866

From other countries +1 (425) 446-5500 or

Fax +1 (425) 446-5116

Web access: http://www.fluke.com

Specifications subject to change without notice.

Printed in U.S.A. 9/2007 3094045 D-EN-N Rev A

Fluke. Keeping your world

up and running.®

Ordering information:

Fluke-353 AC/DC True-rms Clamp Meter, 2000 A, Amps only

Includes: C43 Soft Carrying Case, 6 AA batteries, and users manual

Fluke-355 AC/DC True-rms Clamp Meter, 2000 A

Includes: C43 Soft Carrying Case, 6 AA batteries, TL224 1.5 m

Silicone Rubber Test Leads, TP2 Test Probes, AC285 Alligator Clips,

and users manual

Continuity beeper (355 only)

On at ≤30 W

Off at ≥100 W

Frequency measurement

Measurement range 5.0 Hz to 1 kHz

Resolution 0.1 Hz (15 Hz to 399.9 Hz); 1 Hz (400 Hz to 1 kHz)

Accuracy – 5.0 Hz to 100 Hz 0.2 % + 2 counts

Accuracy – 100.1 Hz to 1 kHz 0.5 % + 5 counts

Trigger level Refer to current and voltage tables

General specifications

Batteries Six 1.5 V AA NEDA 15 A or IEC LR6

Battery life (with typical usage, backlight off) 100 hours

Test leads Rated to 1000 V

Weight .814 kg (1.8 lb)

Jaw size 58 mm (2.28 in)

Dimensions (LxWxD) 300 mm x 98 mm x 52 mm (12 in x 3.75 in x 2 in)

Safety rating IEC 61010-2-032, 600 V CAT IV, 1000 V CAT III

Environmental specifications

Operating temperature 32 °F to + 122 °F (0 °C to +50 °C)

Storage temperature -4 °F to 140 °F (-20 °C to +60 °C)

Operating humidity 0 to 95 % (non-condensing)

Operating altitude 2000 m

Storage altitude 10,000 m

IP rating 42 (indoor use only)

Drop test requirements 1 m

EMI, RFI, EMC FCC part 15, IEC/EN 61326-1:1997 class B, IEC/EN

61326:1997 3V/m, performance criteria B, EN61325

Temperature coefficients Current: 0.1 % of reading per °C outside 22 °C to 24 °C

Voltage: 0.1 % of reading per °C outside 22 °C to 24 °C

Fluke-353Fluke-355

Autres manuels pour 353

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fluke Instrument de mesure

Fluke

Fluke VIBGUARD IIoT Mode d’emploi

Fluke

Fluke 1773 Manuel d'utilisation et d'entretien

Fluke

Fluke OptiView T1/E1 Manuel utilisateur

Fluke

Fluke 35040 Operators Manuel utilisateur

Fluke

Fluke DTX Series Manuel utilisateur

Fluke

Fluke 789 Manuel utilisateur

Fluke

Fluke CableAnalyzer DSX-5000 Manuel utilisateur

Fluke

Fluke DP120 Manuel utilisateur

Fluke

Fluke 732C Guide de configuration

Fluke

Fluke PQ Window Manuel utilisateur

Fluke

Fluke 830 Manuel utilisateur

Fluke

Fluke 700GA4 Manuel utilisateur

Fluke

Fluke 715 Manuel utilisateur

Fluke

Fluke Biomedical MPS450 Operators Manuel utilisateur

Fluke

Fluke 96000 Series Manuel utilisateur

Fluke

Fluke NORMA 4000 Operators Manuel utilisateur

Fluke

Fluke 771 Manuel utilisateur

Fluke

Fluke 789 Manuel d'utilisation et d'entretien

Fluke

Fluke 73 III Manuel utilisateur

Fluke

Fluke WaveRunner Manuel utilisateur

Fluke

Fluke i30s Manuel utilisateur

Fluke

Fluke E-DWT-H Manuel utilisateur

Fluke

Fluke MDA-550 Manuel utilisateur

Fluke

Fluke 5790A Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur