Fluke FiberInspector FT500 Manuel utilisateur

PN 2822112 (English) February 2007 Rev. 2 2/08

All product names are trademarks of their respective companies.

FT500

FiberInspectorTM Mini Video

Microscope

Instruction Sheet

The FT500 FiberInspectorTM Mini video microscope is a hand-held, 200x

magnification probe and display used to inspect fiber optic end-faces

on patch cord and bulkhead connectors.

The video microscope comes with the following:

•

FT500 probe and display

•

AC adapter/charger

•

Standard probe tip set (ST, SC, and universal 2.5 mm)

•

Hex key

•

Instruction sheet

•

Soft carrying case

If anything is missing or damaged, contact the place of purchase

immediately.

Safety Information

WWarning*X

To avoid possible eye damage caused by hazardous

radiation, never look directly into optical output

connectors. Some sources produce invisible radiation that

can permanently damage your eyes.

To avoid possible fire, electric shock, personal injury, or

damage to the video microscope:

•

Do not open the case; no user-serviceable parts are

inside.

•

Use only the ac adapter/charger provided to power

the display and charge the battery.

Charging the Battery

Charge the battery for about 4 hours before using battery power for

the first time. To charge the battery, connect the ac adapter/charger

and set the switch on the display to OFF/CHARGE. The LED on the ac

adapter/charger is red during charging and green when charging is

complete. A fully-charged battery lasts about 3 hours when the

display is on continuously.

WWarningX

To avoid possible fire, electric shock, personal injury or

damage to the video microscope, use only the ac adapter/

charger provided to power the display and charge the

battery.

Note

The battery charges only when the display’s power switch is

in the OFF/CHARGE position.

Features and Use

etn01.eps

To ensure continuous operation, connect the ac adapter

whenever possible.

The LED lights when remaining battery life is about 30 minutes.

Screw an adapter tip onto the fiber probe to match the

connection you are inspecting. Use the universal tip for patch

cords. Use the connector-specific tips for bulkhead connectors.

Set the power mode:

•

OFF/CHARGE: Display is off. The battery charges when the ac

adapter/charger is connected.

•

ON: Display is always on.

•

GRIP: Display is on when you squeeze the grip triggers (

Use this mode to conserve battery power.

Note

Set the switch to OFF/CHARGE when not using the display.

If the switch is left in the GRIP position, the display may be

turned on unintentionally, draining the battery.

Grip triggers. See GRIP under

Turn the wheel to focus the image.

Used with the optional TPakTM kit to hang the display. May be

removed using the hex key included.

Battery door. See "Replacing the Battery".

Maintenance

Clean the LCD display with glass cleaner and a soft, lint-free cloth.

Clean the display and probe housings with a soft cloth dampened

with water or a mild detergent. Do not use solvents or abrasive

cleansers.

Replacing the Battery

Replace the NiMH battery when its life becomes noticeably shorter.

To replace the battery, use the hex key provided to remove the

battery door screw. Remove and disconnect the battery. Connect and

install the new battery, running the battery wires around, not under,

the battery. Replace the battery door and secure it with the hex

screw.

Getting Service

Contact Fluke Networks for information on authorized Fluke

Networks service centers.

Accessories

The following accessories are available from Fluke Networks for the

FT500 FiberInspector Mini video microscope. Visit the Fluke Networks

website at www.flukenetworks.com for a complete list of fiber test

equipment and accessories.

Registration

Registering your product with Fluke Networks gives you access to

valuable information on product updates, troubleshooting tips, and

other support services. To register, fill out the online registration

form on the Fluke Networks website at www.flukenetworks.com/

registration.

Description Fluke Networks Model

TPakTM meter hanging kit

(Lets you hang the display from a

strap or a magnet.)

TPAK

Fiber Optic Cleaning Kit NFC-Kit-Case

Accessory tip set

(LC, FC, and universal 1.25 mm) NFM110

NiMH battery pack NFM120

AC adapter/charger (100 V-240 V) Contact Fluke Networks

Contacting Fluke Networks

•

Australia: 61 (2) 8850-3333 or 61 (3) 9329-0244

•

Beijing: 86 (10) 6512-3435

•

Brazil: 11 3759 7600

•

Canada: 1-800-363-5853

•

Europe: +44-(0)1923-281-300

•

Hong Kong: 852 2721-3228

•

Japan: 03-3434-0510

•

Korea: 82 2 539-6311

•

Singapore: 65 6799-5566

•

Taiwan: (886) 2-227-83199

•

USA: 1-800-283-5853

Visit our website for a complete list of phone numbers.

Specifications

General Specifications

Probe Specifications

www.flukenetworks.com

[email protected]

+1-425-446-4519

Temperature range Operating: 0 °C to 40 °C

Storage: -10 °C to +60 °C

Humidity range Operating: 0 % to 45 % RH non-condensing

Storage: 0 % to 95 % RH non-condensing

Weight 8.1 oz (230 g) (probe and display)

Certifications P

Magnification 200X

Camera type 0.33 in (8.38 mm) CMOS sensor

Light source LED, >100,000 hr life

Lighting technique Coaxial

Dimensions 5.5 in x 1.8 in x 1.7 in

(140 mm x 46 mm x 44 mm)

(length depends on adapter tip)

Display Specifications

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Fluke Networks mainframe products will be free from defects in

material and workmanship for one year from the date of purchase.

Parts, accessories, product repairs and services are warranted for 90

days, unless otherwise stated. Ni-Cad, Ni-MH and Li-Ion batteries,

cables or other peripherals are all considered parts or accessories. This

warranty does not cover damage from accident, neglect, misuse,

alteration, contamination, or abnormal conditions of operation or

handling. Resellers are not authorized to extend any other warranty

on Fluke Networks’ behalf. To obtain service during the warranty

period, contact your nearest Fluke Networks authorized service center

to obtain return authorization information, then send your defective

product to that Service Center with a description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES,

SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR

IMPLIED. FLUKE NETWORKS IS NOT LIABLE FOR ANY SPECIAL,

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,

ARISING FROM ANY CAUSE OR THEORY. Since some states or

countries do not allow the exclusion or limitation of an implied

warranty or of incidental or consequential damages, this limitation of

liability may not apply to you.

4/04

Display type 1.8 in (46 cm) TFT LCD

Video input NTSC

Power source Rechargeable NiMH battery or ac power

AC adapter/

charger Charges six NiMH cells

Input: 100-240 Vac, 0.5 A, 47 Hz to 63 Hz

Output: 9 V dc, 0.4 A

Battery life 3 hours continuous use

Dimensions 3.9 in x 2.8 in x 1.7 in

(100 mm x 72 mm x 43 mm, with TPAK adapter)

Fluke Networks

PO Box 777

Everett, WA 98206-0777

USA

Table des matières

Autres manuels Fluke Instrument de mesure

Fluke

Fluke 165X Manuel utilisateur

Fluke

Fluke 414D Manuel utilisateur

Fluke

Fluke VT Plus HF Manuel utilisateur

Fluke

Fluke 374 FC Manuel utilisateur

Fluke

Fluke 317 Manuel utilisateur

Fluke

Fluke 435-II Manuel d'instructions

Fluke

Fluke PRUFTECHNIK VIB 6.172 Manuel de programmation

Fluke

Fluke 5790A Manuel utilisateur

Fluke

Fluke 3000A Flex 4 Manuel utilisateur

Fluke

Fluke ScopeMeter 199B Manuel utilisateur

Fluke

Fluke i430-Flexi-TF-II Manuel utilisateur

Fluke

Fluke 434-II Guide de configuration

Fluke

Fluke BT21ANG Manuel utilisateur

Fluke

Fluke 700G Series Manuel d'utilisation et d'entretien

Fluke

Fluke 945 Manuel utilisateur

Fluke

Fluke 845AR Manuel utilisateur

Fluke

Fluke DP120 Manuel utilisateur

Fluke

Fluke 365 Manuel utilisateur

Fluke

Fluke 323 Manuel utilisateur

Fluke

Fluke OptiFiber Pro Manuel utilisateur

Fluke

Fluke CableAnalyzer DSX-5000 Manuel utilisateur

Fluke

Fluke QA-ES III Manuel de la liste des pièces

Fluke

Fluke endurance series Manuel utilisateur

Fluke

Fluke 772 Manuel d'utilisation et d'entretien

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur