Fluke 1742 Guide de configuration

Manual Supplement

Manual Title: 1742/1746/1748 Users Supplement Issue: 2

Part Number: Web-Only Issue Date: 8/18

Print Date: October 2017 Page Count: 5

Revision/Date:

This supplement contains information

necessary to ensure the accuracy of

the above manual.

1742/1746/1748 Users Manual Supplement

8/18 1

Change #1, 562

On page 28, replace the Note with:

Note

Most power quality standards, such as EN 50160, 9,

GOST 33073 refer to IEC 61000-4-30 Class A

measurement methods that require Harmonic Sub-

Groups.

Under examples replace the first paragraph with:

Select Harmonic Components for measurements according to

standards that require the harmonics components measurement

according to IEC 61000-4-7, for example IEEE 519 or IEC 61000-3-12.

On page 52, under Environmental Specifications replace the

Operating Temperature with:

Operating…..-25 °C to +50 °C (-13 °F to +122 °F) warm up the Product to

-10 °C (14 °F) before you turn on power.

Change #2, 597

On page 12, replace the Measurement Line Power Source

section with:

Measurement Line Power Source:

XWWarning

To prevent injury, do not touch the metal parts of one test lead

when the other is still connected to hazardous voltage.

WCaution

To prevent damage to the Product, make sure the measured voltage

does not exceed the input rating of the power supply.

1. Attach the power supply to the Logger.

2. Move the slide-cover on the power supply to access the safety

sockets.

3. Connect the short test leads (see Figure 7B & 7C) with the

power supply inputs. Make sure to use the non-stackable plugs.

The test leads are rated for measurement/overvoltage CAT III

1000 V and CAT IV 600 V.

Manual Supplement 1742/1746/1748 Users

2 8/18

4. Connect the test leads with the voltage measurement inputs:

 Connect A/L1 with one input of the power supply.

 Connect N with the second input of the power supply.

 Connect A/L1 with one input of the power supply.

 Connect B/L2 with the second input of the power supply.

5. Use the short fan out of the Voltage Test Lead, 3-phase + N.

Plug the connector A/L1 into the socket A/L1 of the voltage

measurement inputs of the Logger. Repeat this with B/L2, C/L3

and N.

Manual Supplement 1742/1746/1748 Users

3 8/18

 For measurement connection to the Logger (see Figure

7A):

POWERQUALITYLOGGER

1746

POWER QUALITY LOGGER

1746



Figure 7A: Measurement connection to the Logger

1742/1746/1748 Users Manual Supplement

8/18 4

 To supply power to the Logger from installations with neutral

voltage (see Figure 7B):

POWERQUALITY LOGGER

1746

Figure 7B: Measurement with neutral voltage and supplying

instrument power. Note

On single-phase systems, use the set of 1.5 m test leads (item 8

in Figure 7).

6. Connect the voltage inputs to the test points.

The Logger automatically turns on and is ready to use in <30

seconds.

Manual Supplement 1742/1746/1748 Users

5 8/18

 To supply power to the Logger from installations without neutral

voltage (see Figure 7C):

POWERQUALITY LOGGER

1746

Figure 7C: Measurement without neutral voltage and supplying

instrument power.

Note

On single-phase systems, use the set of 1.5 m test leads (item 8

in Figure 7).

7. Connect the voltage inputs to the test points.

The Logger automatically turns on and is ready to use in <30

seconds.

Autres manuels pour 1742

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fluke Instrument de mesure

Fluke

Fluke PM6681 Manuel utilisateur

Fluke

Fluke 80i-110s Manuel utilisateur

Fluke

Fluke 374 Manuel utilisateur

Fluke

Fluke endurance series Manuel utilisateur

Fluke

Fluke 365 Manuel d'utilisation et d'entretien

Fluke

Fluke 323 PLUS Manuel utilisateur

Fluke

Fluke 3210-PR-TF-II Manuel utilisateur

Fluke

Fluke A3003 FC Manuel d'utilisation et d'entretien

Fluke

Fluke 9190A Manuel utilisateur

Fluke

Fluke 365 Manuel utilisateur

Fluke

Fluke 165X Manuel utilisateur

Fluke

Fluke 78 Manuel utilisateur

Fluke

Fluke 353 Manuel utilisateur

Fluke

Fluke i410 Manuel utilisateur

Fluke

Fluke i3000s Flex Series Manuel utilisateur

Fluke

Fluke OptiView II Series Manuel utilisateur

Fluke

Fluke 971 CAL Manuel utilisateur

Fluke

Fluke 789 Manuel d'utilisation et d'entretien

Fluke

Fluke SONOCHEK Manuel utilisateur

Fluke

Fluke 724 Manuel d'utilisation et d'entretien

Fluke

Fluke 700G01 Manuel utilisateur

Fluke

Fluke 789 Manuel utilisateur

Fluke

Fluke 321 Manuel d'utilisation et d'entretien

Fluke

Fluke VIBGUARD IIoT Mode d’emploi

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur