FlowLine EchoSafe XP88 Manuel utilisateur

We do Your Level Best

Model: XP88/89

EchoSafe®

Quick Start

Warranty

Flowline warrants to the original purchaser of its products that such products will be

free from defects in material and workmanship under normal use and service in

accordance with instructions furnished by Flowline for a period, which is equal to the

shorter of one year from the date of purchase of such products or two years from the

date of manufacture of such products. Flowline's obligation under this warranty is

solely and exclusively limited to the repair or replacement, at Flowline's option, of the

products or components, which Flowline's examination determines to its satisfaction to

be defective in material or workmanship within the warranty period. Flowline must be

notified pursuant to the instructions below of any claim under this warranty within thirty

(30) days of any claimed lack of conformity of the product. Any product repaired or

replaced under this warranty will be warranted only for the remainder of the original

warranty period.

Returns

Products cannot be returned to Flowline without Flowline's prior authorization. To

return a product that is thought to be defective, go to www.flowline.com, and submit a

customer return (MRA) request form and follow the instructions therein. All warranty

and non-warranty product returns to Flowline must be shipped prepaid and insured.

Flowline will not be responsible for any products lost or damaged in shipment.

Limitations

This warranty does not apply to products which: 1) are beyond the warranty period or

are products for which the original purchaser does not follow the warranty procedures

outlined above; 2) have been subjected to electrical, mechanical or chemical damage

due to improper, accidental or negligent use; 3) have been modified or altered; 4)

anyone other than service personnel authorized by Flowline have attempted to repair;

5) have been involved in accidents or natural disasters; or 6) are damaged during

return shipment to Flowline. Flowline reserves the right to unilaterally waive this

warranty and dispose of any product returned to Flowline where: 1) there is evidence

of a potentially hazardous material present with the product; or 2) the product has

remained unclaimed at Flowline for more than 30 days after Flowline has dutifully

requested disposition. This warranty contains the sole express warranty made by

Flowline in connection with its products. ALL IMPLIED WARRANTIES, INCLUDING

WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. The remedies of

repair or replacement as stated above are the exclusive remedies for the breach of

this warranty. IN NO EVENT SHALL FLOWLINE BE LIABLE FOR ANY INCIDENTAL

OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING PERSONAL OR

REAL PROPERTY OR FOR INJURY TO ANY PERSON. THIS WARRANTY

CONSTITUTES THE FINAL, COMPLETE AND EXCLUSIVE STATEMENT OF

WARRANTY TERMS AND NO PERSON IS AUTHORIZED TO MAKE ANY OTHER

WARRANTIES OR REPRESENTATIONS ON BEHALF OF FLOWLINE. This warranty

will be interpreted pursuant to the laws of the State of California. If any portion of this

warranty is held to be invalid or unenforceable for any reason, such finding will not

invalidate any other provision of this warranty.

Technical Support

For complete product documentation, video training, and technical

support, go to www.flowline.com.

For phone support, call 562-598-3015 from 8am to 5pm PST, Mon - Fri.

(Please make sure you have the Part and Serial number available.)

Flowline Inc. 10500 Humbolt St, Los Alamitos, CA 90720

QS300600 Rev.A

Made in USA

10500 Humbolt Street, Los Alamitos, CA 90720 USA

Tel: 562.598.3015 Fax: 562.431.8507 www.flowline.com

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

We do Your Level Best

We Do Your Level Best

Thank you for purchasing Flowline’s EchoSafe® explosion-proof, ultrasonic level

transmitter. The sensor provides 4-20 mA analog output with integrated LCD and

three push-button configuration. This Quick Start includes everything you’ll need to

get the sensor up and running. For complete information, please refer to EchoSafe®

documentation located at www.flowline.com.

Components

Depending on the EchoSafe® model shipped to you, you should have the

components shown below. Both components – the EchoSafe® and Viton® gasket –

are required to configure and install the sensor

Select Fail Safety Output

In the event the transmitter does not receive an echo, the Select Fail Safety Output

setting can be set to 22mA, 21mA, 20mA, 4mA or HOLD last value to achieve the

desired fail-safe condition. During fail-safe, the display will read lost.

1) Enter the configuration menu (as discussed previously),

2) Select OUTPUT from the menu,

3) Select SAFE from the menu,

4) Select an output option, such as 22mA, 21mA, 20mA, 4mA, or HOLD, and

5) Select EXIT twice to return to the top level of the Configuration menu.

Reverse 4-20 mA Signal

The transmitter allows you to switch the 4-20 mA value at the top and bottom of the

application. By default, 4mA is configured as the bottom and 20mA is configured as

the top. Follow these instructions to reverse this setting:

1) Enter the configuration menu (as discussed previously),

2) Select OUTPUT from the menu,

3) Select Rev MA from the menu,

4) Select Rev from the menu, and

5) Select EXIT twice to return to the top level of the Configuration menu.

Troubleshooting

If you face any issues not addressed in this quick start, please refer to the EchoSafe®

Manual located on Flowline website at www.flowline.com.

Safety Concern

Where personal safety or significant property damage can occur due to a spill, the

installation must have a redundant backup safety system installed.

EchoSafe®

XP88, XP89

Viton® gasket

Part # 200129 (2”)

Welcome to the EchoSafe®Quick Start

The EchoSafe® Quick Start is meant to show some of the more common setup solutions

to getting the EchoSafe® up and running quickly. If you run into an issue that is not

addressed here or wish to install or set up with a non-standard configuration, please

address the EchoSafe® Manual or refer to the Flowline website at www.flowline.com.

Opening the Enclosure

The EchoSafe® is designed to be installed in hazardous areas and

should never be opened while power is applied. Always disconnect

the EchoSafe's power source prior to opening, programming,

installing, or removing. Additionally, ensure that electrical wiring, fittings and

mechanical connections conform to all applicable electrical codes.

Proper Installation & Handling

Only properly trained staff should install and/or repair this product. Never over

tighten the transmitter within the fitting. Always check for leaks prior to system

start-up.

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

We do Your Level Best

Setting Units

Riser Mounting

Side Mounting

Set Units

The sensor displays information in inches, feet,

centimeters, meters, or percentages.

This can represent the amount of air or the amount of

liquid in a tank. Air Display Mode shows the distance from

the bottom of the sensor to the liquid surface. Liquid Display Mode

shows the distance from the liquid surface to the bottom of the tank.

Follow these instructions to set how units are displayed:

1) Enter the Configuration menu (as discussed previously),

2) Select UNITS from the menu,

3) Select the type of unit or the type of display you desire, and

4) Select EXIT to return to the Configuration menu.

Set Height and Fill Height

This setting customizes the reading for your installation. Follow these instructions to

set the height and fill height for your tank:

1) Enter the configuration menu (as discussed previously),

2) Press SELECT when Tank appears,

3) Select HEIGHT. Use the UP and DOWN buttons to set the height of your

tank. Then, hold down the SELECT button to save this setting,

4) Select FILL-H for the fill

height. Use the UP and

DOWN buttons to set the

fill height of your tank.

Then, hold down the

SELECT button to save

this setting, and

5) Select EXIT to return to

the Configuration menu.

Mounting the Transmitter

The transmitter should always be mounted perpendicular to the

liquid surface using the provided Viton® mounting gasket. Insure

that there are no restrictions or obstacles in the path of the

ultrasonic signal. Further mounting information can be found on

the Flowline website at www.flowline.com.

Mounting with a Tank Adapter: Select a tank adapter fitting,

such as the LM52-2890.

Mounting with a Riser: As installations with tall, narrow risers

can impede the acoustic signal. 2" diameter risers should be no

taller than 4". Larger diameter risers should be no taller than 12".

Mounting with a Side Mount Bracket: Use Flowline's LM50-

1001 side mount bracket.

Mounting with a Stand Pipe: A standpipe may be used to

dampen turbulence, separate surface foam from the point of

measurement or increase performance in heavy vapor

Select a 3” or 4” pipe and attach the sensor with a coupling

and reducer bushing. The pipe length should run the

measurement span and the bottom of the pipe should

remain submerged at all times to prevent foam from entering

the pipe. Cut the bottom end of the pipe at 45° and drill a

1/4” pressure equalization hole high in the dead band. The

pumps should not drive liquid past the open end of the

standpipe which causes the liquid in the pipe to oscillate.

IMPORTANT MOUNTING GUIDELINES:

1) Never mount the transmitter at an angle.

2) Liquid should never enter the dead band.

3) Mount at least 3” from the side wall.

4) Never mount in a vacuum.

5) Do not obstruct the transmitter’s beam width.

Setting Fill Height

Stand Pipe Mounting

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

We do Your Level Best

The Transmitter’s Interface

Height and Fill Height

Wiring the Transmitter

The below wiring diagram can be used to wire the Transmitter.

Some notes on safety:

Wiring should always be

completed by a licensed

electrician.

Supply voltage should

never exceed 28 VDC.

The sensor must be

chemically compatible with

the application.

Design a fail-safe system

for possible sensor and/or

power failure.

When installed in

hazardous locations, follow

all established safety

precautions.

Where personal safety or

significant property

damage can occur due to a

spill, the installation must

have a redundant backup

safety system installed.

Configuring the Transmitter

The transmitter features a non-volatile memory and can be configured prior to

installation. Your configuration will not be lost when the transmitter is powered down.

Before configuring, be sure to have the following information:

Height. This is the distance from the transducer face to the bottom of the tank.

Fill Height (Fill-H). This is the distance from the highest level of liquid to the

bottom of the tank

Entering Configuration Menu

The sensor is configured with the three button's on the transmitter 's face (UP, DOWN

and SELECT) and the sensor ’s LCD. To access the transmitter's configuration menu,

simply hold down the SELECT button for five seconds or until the menu is displayed.

When the SELECT button is released, the display menu will begin to scroll through

the uppermost level of the configuration menu.

When the menu scrolls to an item you wish to configure, simply

press the SELECT button again when that item appears. Once

you've made your configuration changes, press SELECT again

to scroll through the options and once more while RUN appears

in the display. This will return the sensor to its operational

mode.

Handling Static-Sensitive Surfaces/Devices

Follow the guidelines below to reduce any possible electrostatic charge

build-up when handling the EchoSafe®:

1. Always touch a reliable ground source before handling the EchoSafe®. This should

be repeated while handling the EchoSafe® and more frequently after sitting down from

a standing position, sliding across the seat or walking a distance.

2. Avoid touching the EchoSafe's electrical terminals except when making

connections.

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

Autres manuels pour EchoSafe XP88

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels FlowLine Émetteur

FlowLine

FlowLine EchoTouch US03 Series Manuel utilisateur

FlowLine

FlowLine EchoBeam LR80 Series Manuel utilisateur

FlowLine

FlowLine EchoTouch US12 Series Manuel utilisateur

FlowLine

FlowLine EchoSafe XP88 Manuel utilisateur

FlowLine

FlowLine LD31-S301 Series Manuel utilisateur

FlowLine

FlowLine EchoBeam LR83 Series Manuel utilisateur

FlowLine

FlowLine EchoWave LG10 Series Manuel utilisateur

FlowLine

FlowLine EchoPod UG06 Series Manuel utilisateur

FlowLine

FlowLine EchoWave LG11 Series Manuel utilisateur

FlowLine

FlowLine EchoSonic LU23-00 Manuel utilisateur

FlowLine

FlowLine EchoPulse LR30 Series Manuel utilisateur

FlowLine

FlowLine EchoPod US01-03 Manuel utilisateur

FlowLine

FlowLine MiniMe LU12 Manuel utilisateur

FlowLine

FlowLine EchoPod UG06 Series Manuel utilisateur

FlowLine

FlowLine EchoSonic II LU27 Series Manuel utilisateur

FlowLine

FlowLine EchoPod UG06 Series Manuel utilisateur

FlowLine

FlowLine EchoPod UG01-03 Manuel utilisateur

FlowLine

FlowLine EchoSonic LU23 Series Manuel utilisateur

FlowLine

FlowLine EchoPod UG12 Series Manuel utilisateur

FlowLine

FlowLine EchoTouch US01 Series Manuel utilisateur

FlowLine

FlowLine EchoSpan LU80 series Manuel utilisateur

FlowLine

FlowLine EchoSonic LU05 Manuel utilisateur

FlowLine

FlowLine EchoPro LR11 Series Manuel utilisateur

FlowLine

FlowLine EchoPro LR11 Series Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur