FieldServer Safetran SCS-128 FS-8700-128 Note de version

A Sierra Monitor Company

APPLICABILITY & EFFECTIVITY

Effective for all systems manufactured after May 1 2001

Driver Manual

(Supplement to the FieldServer Instruction Manual)

FS-8700-128 Safetran SCS-128

Driver Version:

1.00

Document Revision:

FS-8700-128 Safetran SCS-128 Manual Table of Contents

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www. ieldServer.com

Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@ ieldServer.com

TABLE OF CONTENTS

1. SAFETRAN-SCS-128 DESCRIPTION ............................................................................ 3

2. DRIVER SCOPE OF SUPPLY ........................................................................................ 4

2.1. Supplied by ieldServer Technologies for this driver.................................................. 4

2.2. Provided by the Supplier of 3

Party Equipment ........................................................ 4

2.2.1. Required 3

Party Configuration............................................................................. 4

3. HARDWARE CONNECTIONS........................................................................................ 5

4. CONFIGURING THE FIELDSERVER AS A SAFETRAN-SCS-128 CLIENT .................. 6

4.1. Data Arrays/Descriptors............................................................................................. 6

4.2. Client Side Connection Descriptions .......................................................................... 7

4.3. Client Side Node Descriptors ..................................................................................... 7

4.4. Client Side Map Descriptors....................................................................................... 8

4.4.1. FieldServer Related Map Descriptor Para eters.................................................... 8

4.4.2. Driver Related Map Descriptor Para eters............................................................. 8

4.4.3. Ti ing Para eters ................................................................................................. 8

4.5. Map Descriptor Example: Read Indications................................................................ 9

4.6. Map Descriptor Example: Write Controls ..................................................................10

5. CONFIGURING THE FIELDSERVER AS A SAFETRAN-SCS-128 SERVER................11

5.1. Server Side Connection Descriptors .........................................................................11

5.2. Server Side Node Descriptors...................................................................................12

5.3. Server Side Map Descriptors ....................................................................................13

5.3.1. FieldServer Specific Map Descriptor Para eters...................................................13

5.3.2. Driver Specific Map Descriptor Para eters ...........................................................13

5.3.3. Map Descriptor Exa ple........................................................................................14

APPENDIX A. ADVANCED TOPICS .....................................................................................15

Appendix A.1. Data ormat.................................................................................................15

FS-8700-128 Safetran SCS-128 Manual Page 3 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www. ieldServer.com

Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@ ieldServer.com

1. Safetran-SCS-128 Description

The Safetran-SCS-128 driver allows the transfer of data to and from devices over RS-232 SCS-

128 protocol. Vital Harmon Logic Controller (VHLC) supports SCS-128 protocol. SCS-128

80938-098 Rev A04 is the basis of the Safetran-SCS-128 driver. The ieldServer can act as a

Client or a Server.

Max Nodes Supported

FieldServer Mode Nodes Comments

Client 1 Only 1 virtual client per port allowed on multidrop systems, which

can poll 127 Server devices

Server 127 This is a protocol limit, maximum devices can be polled by Client

FS-8700-128 Safetran SCS-128 Manual Page 4 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www. ieldServer.com

Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@ ieldServer.com

2. Driver Scope of Supply

2.1. Supplied by FieldServer Technologies for this driver

FieldServer Technologies

PART # Description

S-8915-10 UTP cable (7 foot) for RS-232 use

S-8917-04 RJ45 to DB25 connector adapter

S-8700-128 Driver Manual.

2.2. Provided by the Supplier of 3

Party Equipment

2.2.1. Required 3

Party Configuration

If the ieldServer is configured as a Server, then the SCS-128 client must be configured

to use ‘recall’ for indication status polling.

FS-8700-128 Safetran SCS-128 Manual Page 5 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www. ieldServer.com

Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@ ieldServer.com

3. Hardware Connections

The ieldServer is connected to the VHLC as shown in connection drawing.

BASE NAME: FS8700-128

FILE NAME:

FIELDSERVER

Safetran SCS-128

CONNECTION DIAGRAM

DATE: 4/25/

BY: MC

(408)-262-2299

Port C VHLC RS-232

Interface Module P2

DB25

VHLC

Client

RJ45

ieldServer

2Tx

GND

FS-8915-10

8917-04

FS-8700-128 Safetran SCS-128 Manual Page 6 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www. ieldServer.com

Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@ ieldServer.com

4. Configuring the FieldServer as a Safetran-SCS-128 Client

or a detailed discussion on ieldServer configuration, please refer to the ieldServer

Configuration Manual. The information that follows describes how to expand upon the factory

defaults provided in the configuration files included with the ieldServer (See “.csv” sample files

provided with the ieldServer).

This section documents and describes the parameters necessary for configuring the ieldServer

to communicate with a Safetran-SCS-128 Server.

4.1. Data Arrays/Descriptors

The configuration file tells the ieldServer about its interfaces, and the routing of data

required. In order to enable the ieldServer for Safetran-SCS-128 communications, the

driver independent ieldServer buffers need to be declared in the “Data Arrays” section, the

destination device addresses need to be declared in the “Client Side Nodes” section, and

the data required from the Servers needs to be mapped in the “Client Side Map Descriptors”

section. Details on how to do this can be found below.

Note that in the tables, * indicates an optional parameter, with the bold legal value being the

default.

Section Title

Data_Arrays

Column Title Function Legal Values

Data_Array_Name Provide name for Data Array Up to 15 alphanumeric

characters

Data_Array_ ormat Provide data format. Each Data Array

can only take on one format.

loat, Bit, UInt16, SInt16,

Byte,

Data_Array_Length

Number of Data Objects. Must be

larger than the data storage area

required by the Map Descriptors for the

data being placed in this array.

1-10,000

Example

// Data Arrays

Data_Arrays

Data_Array_Name, Data_Array_ ormat, Data_Array_Length

DA_DI_01, Bit, 256

DA_DO_01, Bit, 256

DA_8I_01, Byte, 32

DA_8O_01, Byte, 32

DA_16I_01, Uint16, 16

DA_16O_01, Uint16, 16

DA_32I_01, Uint32, 8

DA_32O_01, Uint32, 8

FS-8700-128 Safetran SCS-128 Manual Page 7 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www. ieldServer.com

Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@ ieldServer.com

4.2. Client Side Connection Descriptions

Section Title

Connections

Column Title Function Legal Values

Port Specify which port the device is connected

to the ieldServer P1-P8

Protocol Specify protocol used

SCS-128

SCS128

Safetran SCS-128

Baud* Specify baud rate 75, 150, 300 ,600, 1200, 2400, 9600

(Vendor limitation)

Parity* Specify parity Even (Vendor limitation)

Data_Bits* Specify data bits 8 (Vendor limitation)

Stop_Bits* Specify stop bits 1 (Vendor limitation)

Handshaking*

Specify hardware handshaking None

Poll_Delay* Time between internal polls 0-32000 seconds, 0.05 seconds

Example

// Client Side Connections

Connections

Port, Protocol, Baud, Parity, Handshaking, Poll_Delay

P8, SCS-128, 9600, Even, None, 0.100s

4.3. Client Side Node Descriptors

Section Title

Nodes

Column Title Function Legal Values

Node_Name Provide name for Node Up to 32 alphanumeric

characters

Node_ID SCS-128 station address of physical Server Node 1-127

Protocol Specify protocol used

SCS-128

SCS128

Safetran SCS-128

Connection Specify which port the device is connected to the

ieldServer P1-P8

SCS128_Ack*

If ON, Ack will be sent to Server upon receipt of every

indication response OFF, ON

Example

// Client Side Nodes

Nodes

Node_Name, Node_ID, Protocol, Connection, SCS128_Ack

NODE_A, 1, SCS-128, P8, O

Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction

manual for details of the ports available on specific hardware.

FS-8700-128 Safetran SCS-128 Manual Page 8 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www. ieldServer.com

Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@ ieldServer.com

4.4. Client Side Map Descriptors

4.4.1. FieldServer Related Map Descriptor Parameters

Column Title Function Legal Values

Map_Descriptor_Name

Name of this Map Descriptor Up to 32 alphanumeric

characters

Data_Array_Name Name of Data Array where data

is to be stored in the ieldServer

One of the Data Array names

from “Data Array” section above

Data_Array_Offset Starting location in Data Array 0 to maximum specified in “Data

Array” section above

unction unction of Client Map Descriptor Rdbc, Wrbc, Wrbx

4.4.2. Driver Related Map Descriptor Parameters

Column Title Function Legal Values

Node_Name Name of Node to fetch data from

One of the Node

names specified in

“Client Node

Descriptor” above

SCS128_Poll_Type*

Specify Poll_type

‘Recall’ or 2 always poll for current indications

‘Poll’ or 1 request for indications if changed

‘Controls’ or 3 writes controls to target device

‘Cutoff’ or 5 or 6 send ‘cutoff’ command to

target device

or Read Map

Descriptors :

Recall 2 Poll, 1,

or Write Map

Descriptors :

Controls 3

Cutoff, 5, 6

Data_Type*

‘ lag’ - each byte of Indication statuses will be

stored in 8 consecutive locations in the Data

Array. On write; one Control byte will be

composed from 8 consecutive locations.

‘Byte’- each byte of Indication statuses will be

stored as an 8 Bit Integer at the specified

location. On Write; one Control byte will be

composed from a single location.

‘Register’ - two bytes of Indication statuses will

be stored as a 16 Bit integer at the specified

location. On Write; two Control bytes will be

composed from a single location.

’32-Bit_Reg’ four bytes of Indication statuses

will be stored as 32 Bit integers at the

specified location. On Write, four Control bytes

will be composed from a single location.

Refer to Appendix A

Flag, Byte, Register,

32-Bit_Reg

Length*

Length of Map Descriptor

Number of indications to store or number of

controls to write as per Data_Type.

lag: 8-256, 16

Byte: 1-32, 2

32-Bit_Reg: 1-8, 1

4.4.3. Timing Parameters

Column Title Function Legal Values

Scan_Interval Rate at which data is polled ≥0.001s

FS-8700-128 Safetran SCS-128 Manual Page 9 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www. ieldServer.com

Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@ ieldServer.com

4.5. Map Descriptor Example: Read Indications

The following Map Descriptors will read 256 indication statuses from physical Server Node_A (described in Client Side Node

Descriptors section) after every 1 second. One such Map Descriptor is required for each Node.

// Client Side Map Descriptors

Map_Descriptors

Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, unction, Node_name Data_Type, SCS128_Poll_Type, Length, Scan_Interval

CMD_DI1, DA_DI, 0, RDBC, Node_A, lag, Recall, 256, 1

CMD_DI2, DA_8I_01, 0, RDBC, Node_A, Byte, Poll, 32, 1

CMD_DI3, DA_16I_01, 0, RDBC, Node_A, Register, 2, 16, 1

CMD_DI4, DA_32I_01, 0, RDBC, Node_A, 32-Bit_Reg, 1, 8, 1

Name of one of the

Data Arraya defined

in the Data_Array

section. Indication

statuses will be

stored in this Data

Array

Starting offset

in Data Array

to hold 1

indication

status

One of the Nodes

declared in Node

Section. Indications

will be read from the

station address

belonging to this

Node

requency (in

seconds) to read

Indication Statuses

Number of consecutive

locations in the Data

array to be used for

storing data from the

Server.

FS-8700-128 Safetran SCS-128 Manual Page 10 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www. ieldServer.com

Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@ ieldServer.com

4.6. Map Descriptor Example: Write Controls

The following Map Descriptor will write 256 controls to physical Server Node_A (described in Client Side Node Descriptors section)

whenever any of the control statuses changes/updates. One such Map Descriptor is required per Node.

// Client Side Map Descriptors

Map_Descriptors

Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, unction, Node_name Data_Type Length SCS128_Poll_Type

CMD_DO1, DA_DO_01, 0, Wrbx, Node_A, lag, 256, Controls

CMD_DO2, DA_8O_01, 0, Wrbx, Node_A, Byte, 32, Controls

CMD_DO3, DA_16O_01, 0, Wrbx, Node_A, Register, 16, Controls

CMD_DO4, DA_32O_01, 0, Wrbx, Node_A, 32-Bit_Reg, 8, Controls

Name of one of

the Data Arrays

defined in

Data_Array

section. This

Data Array

holds control

statuses to be

written to other

devices.

Starting offset

in the Data

Array which

holds the 1

control status.

One of the

Nodes declared

in the Node

Section.

Indications will

read from the

station address

belonging to

this Node

Number of

consecutive locations

in the Data array to

use when issuing the

Write command.

Wrbx: send write

command to the Server

when the associated

Controls updates or

changes.

To write continuously use

Wrbc as function and add

a Scan_Interval parameter

to configure how often to

write.

Autres manuels FieldServer Matériel réseau

FieldServer

FieldServer Honeywell Zellweger IR-148 FS-8700-102 Note de version

FieldServer

FieldServer Hanning FS-8700-127 Note de version

FieldServer

FieldServer Genisys FS-8700-133 Note de version

FieldServer

FieldServer FS-8700-03 DF1 Note de version

FieldServer

FieldServer Carrier DataPort FS-8700-86 Note de version

FieldServer

FieldServer FS-8700-22 X30 Note de version

FieldServer

FieldServer Telnet FS-8704-11 Note de version

FieldServer

FieldServer X-25 Guide de l'utilisateur

FieldServer

FieldServer Gamewell FCI 7100 Series Note de version

FieldServer

FieldServer Canatal Satchnet Driver FS-8700-59 Note de version

FieldServer

FieldServer Hanning FS-8700-127 Note de version

FieldServer

FieldServer Gamewell FS-8700-83 Note de version

FieldServer

FieldServer FS-8700-72 Manuel utilisateur

FieldServer

FieldServer LonWorks FS-8700-21 Note de version

FieldServer

FieldServer Metasys N2 FS-8700-19 Note de version

FieldServer

FieldServer Gamewell FCI E3 Series Note de version

FieldServer

FieldServer Profibus DP FS-8700-20 Note de version

FieldServer

FieldServer Lutron Machine FS-8700-97 Note de version

FieldServer

FieldServer Omron FINS FS-8704-16 Note de version

FieldServer

FieldServer FS-8700-03 DF1 Note de version

FieldServer

FieldServer Dart FS-8700-78 Note de version

FieldServer

FieldServer Profibus FS-8700-113 Note de version

FieldServer

FieldServer ProtoCessor ProtoNode FPC-N34 Guide de l'utilisateur

FieldServer

FieldServer Optomux FS-8700-17 Note de version

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur