Festo CPX-E-PN Manuel utilisateur

System CPX-E

Bus module CPX-E-PN

Description

Protocol

PROFINET

Function

Parameterisation

8071139

2017-07

[8071141]

Bus module CPX-E-PN

2Festo – CPX-E-PN-EN – 2017-07 –

Original instructions

CPX-E-PN-EN

PI PROFIBUS PROFINET®, PROFIenergy®are registered trademarks of the respective trademark owners in certain

countries.

Symbols used:

Note

Material damage or loss of function

Recommendations, tips, references to other documentation

Bus module CPX-E-PN

Festo – CPX-E-PN-EN – 2017-07 – English 3

Table of Contents

1 About this document 4.....................................................................

1.1 Further applicable documents 4..............................................................

1.2 Target group 4............................................................................

1.3 Product version 4.........................................................................

1.4 Product labelling 5........................................................................

1.5 Specified standards 5......................................................................

2 Function 6...............................................................................

2.1 General 6................................................................................

2.1.1 Web server 6......................................................................

2.1.2 Device description file 6.............................................................

2.1.3 PROFIenergy 6.....................................................................

2.1.4 Crossover detection (auto MDI/MDI-X) 6................................................

2.1.5 Priority start-up (Fast Start-Up) 6......................................................

2.1.6 Identification & Maintenance (I&M) 6...................................................

2.1.7 Product design 7...................................................................

2.1.8 Display components 7...............................................................

2.1.9 Connecting components 7............................................................

2.2 Address assignment 8......................................................................

2.3 Addressing 8.............................................................................

2.3.1 Basic rules for addressing 8..........................................................

2.3.2 Addressing example 8...............................................................

2.4 Diagnostics options 9......................................................................

2.4.1 LED indicators 10....................................................................

2.4.2 Status bits 11.......................................................................

2.4.3 I/O diagnostic interface 11............................................................

2.5 Diagnostics via PROFINET IO 12...............................................................

2.5.1 Error numbers 12....................................................................

3 Parameterisation 13........................................................................

A Technical Data 14..........................................................................

B Terminology 15............................................................................

Index 16......................................................................................

1 About this document

4Festo – CPX-E-PN-EN – 2017-07 – English

1 About this document

This document describes the function and parameterisation of the product stated in the title. Safe use of the

product is described in a separate document è1.1 Further applicable documents.

1.1 Further applicable documents

Document Contents

Description of system CPX-E (CPX-E-SYS) Detailed description of system CPX-E

Instructions for using system CPX-E (CPX-E-SYS) Instructions and important notes on mounting,

electrical installation and maintenance tasks for

asystem CPX-E

Instructions for using bus module CPX-E-EP (CPX-E-EP) Instructions and important notes on the use and safe

usage of the product

Documentation for the components in a system CPX-E

and the connected peripherals

Information on using the components

Documentation for the higher-order controller and the

additional participants in the network

Information on commissioning and parameterisation

ofthe components

Tab. 1.1

For all available product documentation èwww.festo.com/pk.

1.2 Target group

This document is intended for qualified personnel. Experience of a PROFINET IO network is required in order to

understand this documentation.

1.3 Product version

This document refers to the following product versions:

Product Version

CPX-E-PN Bus module CPX-E-PN as of Revision 1

Tab. 1.2

The product version can be identified from the product label or with the help of appropriate software from Festo.

Appropriate software for identifying the product version can be found in the Festo Support Portal

èwww.festo.com/sp.

Information on using the software can be found in the integrated Help function.

There may be an updated version of this document for these or later product versions.

 Check whether a corresponding version of this document is available èwww.festo.com/sp.

1 About this document

Festo – CPX-E-PN-EN – 2017-07 – English 5

1.4 Product labelling

The product labelling is located on the left-hand side of the module. Scanning the printed Data Matrix Code with an

appropriate device calls up the Festo Support Portal, with information appropriate for the product. Alternatively, the

Product Key (11-digit alphanumeric code on the product labelling) can be entered in the search field of the Support

Portal.

1Designation

2Part number/serial number

3Revision status

4MAC ID

5Data Matrix Code

6Product Key

7Approvals/warning symbols

8Port assignment

Fig. 1.1

1.5 Specified standards

Version status

EN 60529:2013-10 IEC 61784:2014-08

EN 61000-6-2:2009-04 IEC 61918:2013-08

EN 61000-6-4:2011-09 IEEE 802.3:2014-00

IEC 60204-1:2014-10 NE 21:2012-05

IEC 61158:2014-07

Tab. 1.3

2 Function

6Festo – CPX-E-PN-EN – 2017-07 – English

2 Function

2.1 General

The product is intended for operating a system CPX-E in a PROFINET IO network. Data is transmitted on the basis of

Industrial Ethernet following the IEEE 802.3 protocol. Communication takes place in real time, using the Real-Time

Protocol (RT) or the Isochronous Real-Time Protocol (IRT).

The product has two equivalent Ethernet interfaces (RJ45) with integrated switch, and therefore supports both star

and line topology. The network can be divided into segments using additional switches and routers. This makes it

possible to structure the network and extend it further.

2.1.1 Web server

The integrated web server provides read access to the key parameters and diagnostic functions of the system

CPX-E.

The web server can be accessed by entering the IP address in the address bar of a web browser.

Factory settings of the bus module:

IP address: 192.168.10.3, subnet mask: 255.255.255.0

2.1.2 Device description file

A device description file (GSDML file) is used for configuring the bus module in the higher-order controller software.

This file contains all the information required for parameterising the system CPX-E using controller software (such as

Siemens STEP 7).

The device description file is available on the Festo Support Portal (èwww.festo.com/sp).

2.1.3 PROFIenergy

The product supports the PROFIenergy profile for energy management. This makes it possible to switch off specific

consumers that are not required in order to reduce energy demand.

2.1.4 Crossover detection (auto MDI/MDI-X)

The product supports crossover detection (auto MDI/MDI-X), which means that there is the option of using patch

cables or crossover cables.

When using patch cables and crossover cables in the same network, crossover detection must be

activated in the higher-order controller.

When using the “Priority start-up” function (Fast Start-Up), crossover detection (auto MDI/MDI-X) must

be deactivated.

2.1.5 Priority start-up (Fast Start-Up)

The “Priority start-up” function (Fast Start-Up) ensures that the system CPX-E is able to start up quickly.

When using the “Priority start-up” function (Fast Start-Up), crossover detection (auto MDI/MDI-X) must

be deactivated and the bus module must be parameterised as a slave.

2.1.6 Identification & Maintenance (I&M)

The “Identification & Maintenance” (I&M) function acts as an electronic product label for the bus module and

provides standardised, non-proprietary access to device-related information about the network.

2 Function

Festo – CPX-E-PN-EN – 2017-07 – English 7

2.1.7 Product design

1LED indicators

2Terminal strip for operating voltage supply UEL/SEN

[XD]

3Terminal strip interlock

4Network connection [XF2]

5Linking

6Network connection [XF1]

Fig. 2.1

2.1.8 Display components

1Network-specific LED indicators:

– Network fault [NF] (red)

– Maintenance [M/P] (yellow/green)

– Connection/data traffic [XF1]/[XF2] (green)

2System-specific LED indicators:

– Operating voltage supply UEL/SEN [PS]

(green)

– Load voltage supply UOUT [PL] (green)

– System fault [SF] (red)

– Force mode [M] (yellow)

Fig. 2.2

2.1.9 Connecting components

Port [XF1], [XF2] Signal Designation

1 TD+ Transmitted data +

2 TD– Transmitted data –

3RD+ Received data +

4 n.c. –

5 n.c. –

6RD– Received data –

7 n.c. –

8 n.c. –

1) Shield Functional earth

1) Housing

Tab. 2.1

Connection [XD]1) Signal

0+24 V DC operating voltage supply UEL/SEN

20 V DC operating voltage supply UEL/SEN

1) The ports XD.0 and XD.1 and also XD.2 and XD.3 are interconnected in the terminal strip.

Tab. 2.2

2 Function

8Festo – CPX-E-PN-EN – 2017-07 – English

2.2 Address assignment

The system CPX-E is composed of a different number of inputs and outputs, depending on the number and type

ofmodules CPX-E used and the parameterisation of the bus module. The inputs and outputs are assigned

automatically within the system CPX-E.

The address assignment (number of allocated inputs and outputs) on the system CPX-E must be determined prior

tocommissioning.

– A maximum of 10 I/O modules + bus module is permitted in one system CPX-E.

– The address space of a system CPX-E is limited. The bus module provides the system CPX-E with

amaximum address space of 64 bytes for inputs and 64 bytes for outputs.

– Activated diagnostic functions as well as status bits or the I/O diagnostic interface reduce the size

ofthe available address space.

2.3 Addressing

2.3.1 Basic rules for addressing

– The address assignment of the inputs is independent of the address assignment of the outputs.

– The bus module counts as a module with 0 inputs and 0 outputs when the status bits and the I/O diagnostic

interface are deactivated.

– Activated status bits occupy 8 inputs.

– An activated I/O diagnostic interface occupies 16 inputs and 16 outputs.

– The inputs and outputs of different module types are assigned separately from each other.

Addressing is generally carried out by the higher-order controller (in cases where a Siemens higher-order

controller is being used).

2.3.2 Addressing example

1Bus module CPX-E-PN (with status bits)

– Status bits activated

– I/O diagnostic interface deactivated

2Digital input module CPX-E-16DI

3Digital output module CPX-E-8DO

4Digital output module CPX-E-8DO

5Analogue input module CPX-E-4AI-U-I

6Analogue output module CPX-E-4AO-U-I

Module no.: 0 1 2 345

123456

Fig. 2.3

Tab. 2.3 shows the address assignment for the system CPX-E pictured here, in a TIA portal with a Siemens PLC.

Module no. Module Input address Output address

0Bus module CPX-E-PN (with status bits) Byte 68 –

1Digital input module CPX-E-16DI Byte 1 … 2 –

2Digital output module CPX-E-8DO –Byte 1

3Digital output module CPX-E-8DO –Byte 2

4Analogue input module CPX-E-4AI-U-I Byte 69 … 76 –

5Analogue output module CPX-E-4AO-U-I –Byte 64 … 71

Tab. 2.3

2 Function

Festo – CPX-E-PN-EN – 2017-07 – English 9

2.4 Diagnostics options

The module supports various diagnostics options, depending on the configuration and parameterisation of the

system CPX-E.

Diagnostics option Description Detailed information

LED display components

System-specific The system status and errors are

displayed directly on the module via LED

indicators.

èInstructions for using system CPX-E

èDescription of system CPX-E

Network-specific The network status and errors are

displayed directly on the module via LED

indicators.

è2.4.1

èInstructions for using CPX-E-PN

Status bits Common diagnostic messages are

transmitted cyclically to the interface as

internal inputs. Access is via the control

software, independently of the interface

and master.

è2.4.2

èDescription of system CPX-E

I/O diagnostic interface Network-independent diagnostic interface

with read access to the internal data of

the system CPX-E at the I/O level.

è2.4.3

èDescription of system CPX-E

Festo software Malfunctions or errors are displayed

directly on a PC, meaning that diagnostics

is also possible from a higher automation

level.

èOnline help for software

PROFINET IO Diagnostics as part of PROFINET IO

functions via the network.

Detailed module-related and

channel-related error detection by means

of control software.

è2.5

Tab. 2.4

2 Function

10 Festo – CPX-E-PN-EN – 2017-07 – English

2.4.1 LED indicators

This document describes the network-specific LED indicators. The system-specific LED indicators are

described in the documentation for the system CPX-E è1.1 Further applicable documents.

Network fault [NF]

LED (red) Significance Remedy

Flashes

Network connection not OK

Possible causes:

Device name not correct  Check device name.

IO controller defective  Repair IO controller.

Network connection interrupted,

short-circuited or disturbed

 Check network connection.

Off

No fault (if PS LED lights up green) –

Tab. 2.5

Maintenance/PROFIenergy [M/P]

LED (yellow/

green)

Significance Remedy

Lights up

yellow

Maintenance measure required  Check plug connectors.

Flashes green

PROFIenergy activated –

Off

No maintenance measures required,

PROFIenergy not activated

–

Tab. 2.6

Connection status [XF1], [XF2]

LED (green) Significance Remedy

Lights up

Network connection OK –

Flashes

Module positioning if both LEDs (XF1 and XF2)

flash synchronously, e.g. for troubleshooting

purposes or during configuration

–

Off

No network connection  Check network connection.

Tab. 2.7

Autres manuels pour CPX-E-PN

Table des matières

Autres manuels Festo Unité de contrôle

Festo

Festo CP-E16 Series Manuel utilisateur

Festo

Festo VOFA-L26-T52-M Series Manuel utilisateur

Festo

Festo DG Series Manuel utilisateur

Festo

Festo VABF-P5-Series-A3 Manuel utilisateur

Festo

Festo MH1 Series Manuel de la liste des pièces

Festo

Festo CPX-E Series Instructions d'utilisation et d'installation

Festo

Festo VMPA2-M1H-...-G1 Series Manuel utilisateur

Festo

Festo MS6-SV-...-E-10V24 Series Manuel utilisateur

Festo

Festo CP-FB8 Manuel de la liste des pièces

Festo

Festo Smart cubic CPVSC1-VI Manuel utilisateur

Festo

Festo VTSA Series Manuel de la liste des pièces

Festo

Festo CPX-F8DE-P Manuel utilisateur

Festo

Festo CTEU-DN Manuel de la liste des pièces

Festo

Festo VOFA-L26-T32C-M-G14-1C1 Series Manuel utilisateur

Festo

Festo FRM S-B Series Manuel utilisateur

Festo

Festo CPX-E-4IOL Manuel utilisateur

Festo

Festo VPPM-6L-L-1-G18-0L6H-V1N-S1C1 Manuel utilisateur

Festo

Festo CPX-E-EP Manuel utilisateur

Festo

Festo SMH-AE1 M12 Series Manuel utilisateur

Festo

Festo VTSA Series Instructions d'utilisation et d'installation

Festo

Festo CPA-SC-DP Manuel de la liste des pièces

Festo

Festo CPX-FVDA-P2 Manuel utilisateur

Festo

Festo SPC200-COM-IBS Manuel de la liste des pièces

Festo

Festo EXCM-10 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur

Flyron

Flyron FN-BC04 Manuel utilisateur