Fanvil i55A&i55A-Z Manuel utilisateur
i55A&i55A-Z&i57A&i57A-Z
Indoor Station
Quick Installation Guide
i55A&i55A-Z i57A&i57A-Z
Package Contents
1
Physical specification
2
Indoor Unit Quick Installation Guide Wall-mount Bracket
Model Device Dimension
i55A&i55A-Z 217*124*21 (mm)
Product appearance description
3
1) Panel
a) i55A&i55A-Z
10 pin Cable*2 2 pin Cable*1
TA4*30mm
Screw*5
TM6#*20mm
Screw*5
Screw Fixing
Seat*5
i57A&i57A-Z 295*181*24 (mm)
LED indicator Speaker 2
Speaker 1
MIC
LCD
Manager center key
Unlock key
Answer key
Return / Hang up key
Monitor key
PM4*16mm
Screw*3
i55A&i55A-Z&i57A&i57A-Z
Indoor Station
Quick Installation Guide
i55A&i55A-Z i57A&i57A-Z
2) Interface description
b) i57A&i57A-Z
LED indicator 1
Power
Volume +/-
LED indicator 2
Speaker
MIC
LCD
USB
TF
There are some interfaces on the back of the device for connecting power supply,
alarms etc.
The connections are as follows:
No. Description Interface
Power interface: 12V/1A input.
Ethernet interface: standard RJ45 interface, 10/100M adaptive,
it is recommended to use CAT5 or CAT5E network cable.
1 sets of doorbell interfaces.
1 sets of RS485 interfaces.
Power interface: 12V/1A input.
8 sets of alarm input interfaces: input devices for connecting
switches, infrared sensor, door sensor, vibration sensors etc.
①
②
③-1
③-2
③-3
④
⑤
2 sets of short-circuit output interfaces: corresponding to the
short-circuit input interface, login device webpage settings,
can be connected to electric locks, alarms etc.
NO1
NO2
COM1
COM2
NC1
NC2
Logic
GND IN9
DB
BA
RS485
DC
12V GND
Alarm Input
IN4
IN8
IN3
IN7
IN2
IN6
IN1
IN5
GND
③④⑤
②
①
3) External device connection diagram
Installation Diagram
4
Wall bracket (DIM:mm)
Model 1: Wall-mounted Installation
(CN:86 embedded box,US: single gang&Dual gang, EUR:80 embedded box)
Step 1: Install wall bracket
Without 86 embedded box in the wall
A. Mark two fixation holes positions on the wall with the wall bracket.
B. Take down the bracket, using an electric drill to make the two fixation holes on the
wall, then insert the two screw fixing seats provided.
C. Fix the wall bracket on the wall with two TA4*30 screws.
With 86 embedded box in the wall
A. Fix the wall bracket on the 86 embedded box with two PM4*16 screws.
Step 2: Connect peripherals
A. If you need to connect other input and output devices, please connect to the host
through the cable.
Step 3: Power on the device
If it is working properly, align the slot on the rear side of the panel with the pin on the
wall bracket and slide the host down to complete the installation.
Switch
Door Magnetic
Switch
WAN Port
Output Port
Output Port
Alarm light
Electric lock
Input Port
Input Port
Infrared Sensor
Vibration Sensor Emergency Key
Or
Or
Or
IP Indoor Unit Setting
5
Step 1: Log in the web setting page of Indoor Unit
Step 2: Add the SIP account
Input IP address of indoor unit (e.g. http:// 172.18.90.14) into the address bar of
PC’s web browser.
The default user name and password are both admin.
Set SIP server address, port, user name, password and SIP user with assigned SIP
account parameters.
Select “Activate”, and then click Apply to save this setting.
Step 3: Feature Setting
Application—Doorphone Settings—Add—OK.
Title: Doorphone mode.
Number: The SIP account of Doorphone.
Line: The SIP line of Indoor Unit.
Access codec: Consistent with the access code in doorphone access table
(The i57A-Z as calling party).
Password: Same as open the doorphone’s password (The i57A-Z as called party).
Fanvil Technology Co., Ltd
Website: www.fanvil.com
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618
Add: 10/F Block A, Dualshine Global Science Innovation Center,
Honglang North 2nd Road, Bao'an District, Shenzhen, China
Local Operation
6
Step 4: Unlock Setting
6.1 Answer/hang up calls
When the doorphone calls the indoor unit, click the button to answer the call,
and click the button to hang up the call.
6.2 Unlock the door
During the call of indoor unit and doorphone, click the button to unlock the door.
6.3 Turn on/off the monitoring
Click the button on the indoor unit to check the monitoring screen, and click the
button to exit. (Only support for the communication with video doorphone)
6.4 Volume adjustment
When the indoor unit is talking to other devices like doorphone, click the button
to increase the volume, and click the button to decrease the volume.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Fanvil Système d'interphone
Fanvil
Fanvil i51W Manuel utilisateur
Fanvil
Fanvil i12-01 Manuel utilisateur
Fanvil
Fanvil i20 Manuel utilisateur
Fanvil
Fanvil i20S Manuel utilisateur
Fanvil
Fanvil i51W Manuel utilisateur
Fanvil
Fanvil i10S Manuel utilisateur
Fanvil
Fanvil i33V Manuel utilisateur
Fanvil
Fanvil i30 Manuel utilisateur
Fanvil
Fanvil i10 Guide d'installation et d'utilisation
Fanvil
Fanvil i31 Manuel utilisateur
Fanvil
Fanvil i56A Manuel utilisateur
Fanvil
Fanvil i20S IP DoorPhone Manuel utilisateur
Fanvil
Fanvil i12 Manuel utilisateur
Fanvil
Fanvil i66 Manuel utilisateur
Fanvil
Fanvil A10 Manuel utilisateur
Fanvil
Fanvil i32V Manuel utilisateur
Fanvil
Fanvil i16S Manuel utilisateur
Fanvil
Fanvil i10 Manuel utilisateur
Fanvil
Fanvil i33V Manuel utilisateur
Fanvil
Fanvil i12 Manuel utilisateur
