F&F PK-1P Manuel utilisateur

- 1 -

PK-1P 110 V

Electromagnetic

relay

Electromagnetic relay in single-module housing for direct moun-

ting on TH-35 rail.

Applying the supply voltage to the relay coil will switch the con-

tacts to position 11-12. This state is indicated by a green LED.

After a power failure, the contacts return to position 11-10.

1.Switch off the power supply.

2.Mount the relay on the rail in the distribution box.

3.Connect the power supply to terminals 1-3 (in any order).

4.Connect the power supply circuit of the controlled receiver via

contacts 11-12 (NO contact).

Purpose

Functioning

Assembly

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: biuro@fif.com.pl

Do not dispose of this device in the trash along with other waste! According

to the Law on Waste, electro coming from households free of charge and

can give any amount to up to that end point of collecon, as well as to sto-

re the occasion of the purchase of new equipment (in accordance with the

principle of old-for-new, regardless of brand). Electro thrown in the trash or

abandoned in nature, pose a threat to the environment and human health.

- 2 -

1-3 power supply 110 V AC/DC

10 NC break contact (passive)

11 COM common contact

12 NO closing contact (active)

Connecting diagram

- 3 -

power supply 110 V AC/DC

maximum load current (AC-1) 16 A*

switching voltage 250 V AC

contact 1×NO/NC

usage category AC-7a

insulation voltage 400 V

surge voltage

contacts-coil 2.5 kV

contact separation 1.2 kV

surge resistance 3 kV

current consumption 25 mA

activation time <40 ms

deactivation time <20 ms

mechanical durability min. 5×10⁶ cycles

electrical durability min. 1×10⁵ cycles

power indicator LED

power consumption 25 mA

working temperature -25÷50°C

terminal screw terminals 2.5 mm²

tightening torque 0.4 Nm

dimensions 1 module (18 mm)

mounting on TH-35 rail

protection level IP20

* modular contactors are recommended

Technical data

- 4 -

F&F products are covered by a 24-month warranty from the date

of purchase. The warranty is only valid with proof of purchase.

Contact your dealer or contact us directly.

F&F Filipowski sp. j. declares that the device is in conformity

with the essential requirements of The Low Voltage Directive

(LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC)

Directive 2014/30/UE. The CE Declaration of Conformity, along

with the references to the standards in relation to which confor-

mity is declared, can be found at www.fif.com.pl on the product

page: www.fif.com.pl from the product subpage.

Warranty

CE declaration

E201014

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels F&F Relais

Manuels Relais populaires d'autres marques

Shelly

Shelly Pro Series Manuel utilisateur

GE

GE MVAX 11 Manuel utilisateur

ABB

ABB RELION REF615R Manuel utilisateur

Pilz

Pilz PNOZ X10 Manuel du propriétaire

ABB

ABB SPAJ 142 C Manuel de la liste des pièces

Kemo Electronic

Kemo Electronic B197 Manuel utilisateur

Seg

Seg MRM3 Manuel utilisateur

Basler

Basler BE1-700C Manuel utilisateur

CD Automation

CD Automation REVEX 2PH 280A Manuel utilisateur

Ruelco

Ruelco 1S04 Manuel utilisateur

Basler

Basler V3E Z1P B2C1F Manuel utilisateur

Doepke

Doepke Dupline DSM 2 Manuel utilisateur

Siemens

Siemens SIRIUS 3RT1966-4D Manuel utilisateur

GE

GE DGP Manuel utilisateur

Kyongbo Electronics

Kyongbo Electronics GDR-D01 Manuel utilisateur

Siemens

Siemens SIPROTEC 4 Manuel utilisateur

Siemens

Siemens BD2-AK03X/FS Series Manuel utilisateur

Leuze

Leuze MSI-SR5B Manuel utilisateur