Extech Instruments 421501 Manuel utilisateur

User's Guide

Type K Digital Thermometer

Model 421501

Introduction

Congratulations on your purchase of the Extech 421501 Type K Digital Thermometer.

This water resistant meter measures temperature with a Type K thermocouple. The

thermocouple attaches to the meter with a sub-miniature plug. The meter’s display is

backlit and includes a Data Hold feature. Other features include Max Temperature and

selectable units/resolution. This meter is shipped fully tested and calibrated and, with

proper use, will provide years of reliable service.

0.1/1

Model 421501 Version 1.3 February 2006

Warranty

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and

workmanship for one year from date of shipment (a six month limited warranty applies to sensors and cables).

If it should become necessary to return the instrument for service during or beyond the warranty period,

contact the Customer Service Department at (781) 890-7440 ext. 210 for authorization or visit our website

www.extech.com for contact information. A Return Authorization (RA) number must be issued before any

product is returned to Extech. The sender is responsible for shipping charges, freight, insurance and proper

packaging to prevent damage in transit. This warranty does not apply to defects resulting from action of the

user such as misuse, improper wiring, operation outside of specification, improper maintenance or repair, or

unauthorized modification. Extech specifically disclaims any implied warranties or merchantability or fitness for

a specific purpose and will not be liable for any direct, indirect, incidental or consequential damages. Extech's

total liability is limited to repair or replacement of the product. The warranty set forth above is inclusive and no

other warranty, whether written or oral, is expressed or implied.

Specifications

Display 3-1/2 digit LCD (2000 counts)

Battery Power Supply 9V DC battery.

Battery life 200 hours typical

Dimensions / Weight 7.5 x 3.6 x 2.1” (192 x 91 x 52.5mm); 11.7oz. (365g)

Range / Resolution -58 to 2000oF (-50 to 1300oC); 1oor 0.1oF/oC

Important Note: The supplied thermocouple can only

be used to measure temperature up to 500oF (260oC).

To measure higher temperatures, a high temperature

Type K thermocouple must be used.

Temperature units Selectable oC or oF temperature units

±(0.3% of reading + 1oC) from -50oC to 1000oC

±(0.5% of reading + 1oC) from 1000oC to 1300oC

Accuracy of meter

±(0.3% of reading + 2oF) from -58oF to 2000oF

Temperature Coefficient 0.1 times the applicable accuracy specifications per oC

from 0oC to 18oC and 28oC to 50oC (32oF to 64oF and

82oF to 122oF)

Water resistant housing Gasket protected front panel

Input Protection 24VAC/DC max. input on any combination of inputs

Reading rate 2.5 times per second

Thermocouple connection Meter accepts standard subminiature connector

Supplied thermocouple Teflon insulated Type K thermocouple (4’ length)

Max temperature: 500oF (260oC); For higher

temperatures, a high temp thermocouple must be used.

Accuracy: ±4oF (±2.2oC) or +0.75% of rdg

(whichever is greater) from 32 to 1472oF (0 to 800oC)

Operating conditions 32 to 122oF (0 to 50oC); less than 80% RH

Storage conditions -4 to 140oF (-20 to 60oC); less than 70% RH

Model 421501 Version 1.3 February 2006

0.1/1

Meter Description

1. Thermocouple plug

2. LCD Display

3. Power ON/OFF button

4. Resolution select button

5. Maximum reading mode button

6. Rubber protective jacket

7. Unit of measure oC/o F select key

8. Backlight activation key

9. Data Hold key

Note: Battery compartment and Tilt Stand on rear of meter

Operation

Powering the Meter

Turn the meter on by pressing the POWER button. If the meter’s display does not switch

ON, check that the 9V battery is installed and is fresh. Press the POWER button to turn

the meter OFF.

Connecting a Type K thermocouple

1. Plug a Type K thermocouple into the meter’s input jack (top of meter). This meter

accepts Type K thermocouples with spade plugs (sub-miniature type).

2. If a thermocouple is not inserted to the meter or the probe is malfunctioning, all dashes

"------" will appear on the display. If dashes appear, ensure that the probe is properly

connected. If dashes appear with the probe connected, try another probe.

Taking measurements

With the thermocouple connected and the meter ON, place the thermocouple in air,

touching an object, or in a liquid solution. Read the temperature measurement on the LCD.

Important Note: The supplied thermocouple can only be used to measure temperature up

to 500oF (260oC). To measure higher temperatures, a high temperature Type K

thermocouple must be used.

Selecting oC/oF units of measure

Press the oC/oFkey to select the desired temperature unit of measure.

Selecting the Resolution

Use the 0.1o/ 1obutton to select the desired resolution. The decimal point location will

reflect each press of the resolution button.

Display Backlight

Press the backlight button (sun symbol) to turn the LCD backlight ON. Press again to turn

it OFF. Backlighting comes in handy in dimly lit areas and for nighttime use.

Data Hold

To freeze the LCD display, momentarily press the HOLD button. The 'H' icon will appear

on the LCD when the Data Hold mode is accessed. Momentarily press the HOLD button

again to return to normal operation (the 'H' hold icon will switch off).

MAX Temperature Mode

Press the MAX button to enter the Max mode (the MAX indicator will appear on the LCD).

The meter then displays only the highest reading. Each time the temperature reading

exceeds the currently displayed value, the displayed value changes and updates to the

new MAX temperature. Press the MAX button again to exit the MAX mode.

Model 421501 Version 1.3 February 2006



Support line (781) 890-7440

Technical support: Extension 200; E-mail: [email protected]

Repair & Returns: Extension 210; E-mail: [email protected]

Product specifications subject to change without notice

For the latest version of this User’s Guide, Software updates, and other

up-to-the-minute product information, visit our website: www.extech.com

Extech Instruments Corporation, 285 Bear Hill Rd., Waltham, MA 02451

Maintenance

Battery Replacement

When the low battery symbol appears on the display, replace the 9V battery. Follow the

steps below:

1. Remove the rubber protective jacket that encases the meter. If this jacket is not

removed, the battery compartment cannot be accessed.

2. Remove the two rear screws that secure the battery compartment.

3. Open the compartment and replace the 9V battery.

4. Secure the meter’s battery compartment and rubber jacket before using the

meter.

WARNING! To avoid possible electrical shock, disconnect the thermocouple before

removing the battery cover.

Cleaning

Use a damp cloth with a mild detergent to periodically wipe the meter housing and display

area. Do not use abrasives or solvents to clean the meter.

Calibration and Repair Services

Extech offers repair and calibration services for the products we sell. Extech also

provides NIST certification for most products. Call the Customer Service Department for

information on calibration services available for this product. Extech recommends that

annual calibrations be performed to verify meter performance and accuracy.

Table des matières

Autres manuels Extech Instruments Thermomètre

Extech Instruments

Extech Instruments 42560 Manuel utilisateur

Extech Instruments

Extech Instruments EA15 Manuel utilisateur

Extech Instruments

Extech Instruments IRT25 Manuel utilisateur

Extech Instruments

Extech Instruments RH200W Manuel utilisateur

Extech Instruments

Extech Instruments 42510A Manuel utilisateur

Extech Instruments

Extech Instruments 42500 Manuel utilisateur

Extech Instruments

Extech Instruments HD200 Manuel utilisateur

Extech Instruments

Extech Instruments IR260 Manuel utilisateur

Extech Instruments

Extech Instruments RHT510-NIST Manuel utilisateur

Extech Instruments

Extech Instruments RHT510 Manuel utilisateur

Extech Instruments

Extech Instruments HD500 Manuel utilisateur

Extech Instruments

Extech Instruments RH200W Manuel utilisateur

Extech Instruments

Extech Instruments 42545A Manuel utilisateur

Extech Instruments

Extech Instruments K.J.E.T. 422324 Manuel utilisateur

Extech Instruments

Extech Instruments 42540 Manuel utilisateur

Extech Instruments

Extech Instruments TM300 Manuel utilisateur

Extech Instruments

Extech Instruments VIR50 Manuel utilisateur

Extech Instruments

Extech Instruments RH10 Manuel utilisateur

Extech Instruments

Extech Instruments EasyView 10 Manuel utilisateur

Extech Instruments

Extech Instruments RHM15 Manuel utilisateur

Extech Instruments

Extech Instruments EzSmart RHT3 Manuel utilisateur

Extech Instruments

Extech Instruments SDL200 Manuel utilisateur

Extech Instruments

Extech Instruments 42500 Manuel utilisateur

Extech Instruments

Extech Instruments RH490 Manuel utilisateur

Manuels Thermomètre populaires d'autres marques

Delton

Delton 981A Manuel utilisateur

Baker

Baker MM2P Manuel utilisateur

Tarmo

Tarmo 320281 Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

TFA

TFA 14.1500 Manuel utilisateur

Vive

Vive DMD1010 Manuel utilisateur

Gotemp

Gotemp THB4002 Manuel utilisateur

GREISINGER

GREISINGER G 1202 Manuel utilisateur

Amprobe

Amprobe TMD-53W Manuel utilisateur

Trotec

Trotec BP10 Manuel utilisateur

Radiance instruments

Radiance instruments RT616 Series Manuel utilisateur

Eurolec

Eurolec IR151 Manuel utilisateur

Scaneo

Scaneo TS42B Manuel utilisateur

Sper scientific

Sper scientific 800043 Manuel utilisateur

Microlife

Microlife NC 200 Mode d’emploi

Motorola

Motorola MBP69SN Guide de configuration

The MeatStick

The MeatStick The MeatStick Manuel utilisateur

Hama

Hama TH35-A Manuel utilisateur