evertz QMC-DCP-RP Manuel utilisateur
Installation Guide for the QMC-DCP-RP
Revision 1.0
TABLE OF CONTENTS
1. SETUP FOR INSTALLATION OF QMC-DCP ADJUSTABLE RACK MOUNTS................1
1.1. GETTING STARTED................................................................................................................1
2. REMOVING PROTECTIVE COVERS.................................................................................2
3. INSTALLING THE ADJUSTABLE MOUNTS.....................................................................4
3.1. STEP 1: INSTALLING THE TOP GUIDES TO THE RIGHT AND LEFT SIDE........................ 4
3.2. STEP 2: INSTALLING THE BOTTOM GUIDES...................................................................... 6
3.3. STEP 3: COMPLETING THE ASSEMBLY..............................................................................8
Tables
Table 1-1: Parts List.............................................................................................................................1
Figures
Figure 1-1: Parts in the QMC-DCP-RP Accessory Kit ......................................................................... 1
Figure 2-1: Protective Cover on QMC-DCP.........................................................................................2
Figure 2-2: Remove the Protective Covering from the Right Side.......................................................2
Figure 2-3: Remove the Protective Covering from the Left Side.......................................................... 3
Figure 2-4: Protective Cover removed from the QMC-DCP.................................................................3
Figure 3-1: Attaching the Top Guide Rotation Lock – Right Side ........................................................4
Figure 3-2: Securing the Top Guide Rotation Lock – Right Side.........................................................5
Figure 3-3: Attaching the Top Guide Rotation Lock – Left Side........................................................... 5
Figure 3-4: Securing the Top Guide Rotation Lock – Right Side.........................................................6
Figure 3-5: Bottom Guide with mounting holes....................................................................................7
Figure 3-6: Bottom Guide position in respect to Top Guide (not installed) ..........................................7
Figure 3-7: Bottom Guide position in respect to Top Guide (installed) ................................................8
Figure 3-8: Adjusting and securing the angle.......................................................................................8
Installation Guide for the QMC-DCP-RP
Revision 1.0
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0 First Release Jul 07
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor
for the rights of third parties, which may be effected in any way by the use thereof. Any representations in this document concerning
performance of Evertz products are for informational use only and are not warranties of future performance, either express or implied. The
only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order
confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no
warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If
you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make
changes in equipment design or specifications.
Installation Guide for the QMC-DCP-RP
Revision 1.0 Page 1
1. SETUP FOR INSTALLATION OF QMC-DCP ADJUSTABLE RACK MOUNTS
The QMC-DCP-RP is an accessory kit for the QMC Desktop Control Panel (QMC-DCP). The QMC-
DCP-RP accessory kit allows the user to adjust the angle of the QMC-DCP when it is installed in a desk
or rack.
1.1. GETTING STARTED
The QMC-DCP-RP accessory kit comes with the following pieces of equipment:
Part Description Evertz Part # Quantity
A QMC DCP Top Guide Rotation Lock - Right Side QMC-DCP-MC-8 1
B QMC DCP Top Guide Rotation Lock - Left Side EQMC-DCP-MC-9 1
C QMC DCP Bottom Guide Rotation EQMC-DCP-MC-7 2
D 3 x 25mm Pan Head Screw HMMM3X25PANZC 8
E M5 Lockwasher HWASHER-M5LOCK 2
F 5 x 10mm Pan Head Screw HM5X10MM-PANPHIL 2
Table 1-1: Parts List
Figure 1-1: Parts in the QMC-DCP-RP Accessory Kit
"If items are missing from the QMC-DCP-RP accessory kit, please contact Evertz
Installation Guide for the QMC-DCP-RP
Page 2 Revision 1.0
2. REMOVING PROTECTIVE COVERS
The QMC-DCP is shipped with protective covering on the mounting braces. These covers can be
removed by unscrewing the screws, as shown in Figure 2-1. This step is repeated for both the right
and left side of the QMC-DCP. (See Figure 2-2 and Figure 2-3)
Figure 2-1: Protective Cover on QMC-DCP
Figure 2-2: Remove the Protective Covering from the Right Side
Installation Guide for the QMC-DCP-RP
Page 4 Revision 1.0
3. INSTALLING THE ADJUSTABLE MOUNTS
The QMC-DCP-RP accessory kit has two major parts: The Top Guides (right and left) and the Bottom
Guides. The right and left Top Guides are fastened on the QMC-DCP panel itself and the Bottom
Guides are fastened to the mounting 19” wide rack on the desk or in the equipment room.
3.1. STEP 1: INSTALLING THE TOP GUIDES TO THE RIGHT AND LEFT SIDE
Place Top Guide Rotation Lock – Right Side (PART A) onto the mounting bracket on the right side of
the QMC-DCP. (See Figure 3-1)
Figure 3-1: Attaching the Top Guide Rotation Lock – Right Side
Using four 3x25mm Pan Screws (Part D), secure the Top Guide Rotation Lock to the QMC-DCP as
shown in Figure 3-2.
Installation Guide for the QMC-DCP-RP
Revision 1.0 Page 5
Figure 3-2: Securing the Top Guide Rotation Lock – Right Side
Repeat the process for attaching the Top Guide Rotation Lock – Left Side to the mounting bracket on
the left side of the QMC-DCP panel, as shown in Figure 3-3 and Figure 3-4.
Figure 3-3: Attaching the Top Guide Rotation Lock – Left Side
Installation Guide for the QMC-DCP-RP
Page 6 Revision 1.0
Figure 3-4: Securing the Top Guide Rotation Lock – Right Side
3.2. STEP 2: INSTALLING THE BOTTOM GUIDES
The Bottom Guides (Part C – see Figure 3-5) are fastened to the rack or desktop rack that the QMC-
DCP is being fitted in. There are two Bottom Guides provided in the QMC-DCP-RP. These parts are
bi-directional, therefore, no right or left designation is required. The Bottom Guides are fastened to the
rack through the mounting holes shown in Figure 3-5.
"
The screws used to fasten the Bottom Guides to the rack or desktop rack ARE NOT
INCLUDED in the QMC-DCP-RP Accessory kit. The user MUST provide this
hardware.
Installation Guide for the QMC-DCP-RP
Revision 1.0 Page 7
Figure 3-5: Bottom Guide with mounting holes
When installing the Bottom Guide to the rack, the user should be aware that the Bottom Guide attaches
to the Top Guide with Rotation Lock, as shown in Figure 3-6 and Figure 3-7. Therefore, care MUST be
taken when centering the Bottom Guide in the rack. This step is repeated for both the right and left side
of the rack or desktop rack.
Figure 3-6: Bottom Guide position in respect to Top Guide (not installed)
Installation Guide for the QMC-DCP-RP
Page 8 Revision 1.0
Figure 3-7: Bottom Guide position in respect to Top Guide (installed)
3.3. STEP 3: COMPLETING THE ASSEMBLY
For the final step of the assembly, the user can adjust the angle of the panel using the pin connector
shown in Figure 3-8. Once the desired angle is achieved, the user fixes this angle by tightening the
Lock Screw (Part E), shown in Figure 3-8.
Figure 3-8: Adjusting and securing the angle
Table des matières
Autres manuels evertz Matériel informatique
evertz
evertz 5010 Manuel utilisateur
evertz
evertz QMCsetup Manuel utilisateur
evertz
evertz X0400 Series Manuel utilisateur
evertz
evertz S7720AD-A4-LTC Manuel utilisateur
evertz
evertz 7700 MultiFrame Manuel utilisateur
evertz
evertz 7700 Series Manuel utilisateur
evertz
evertz 7707VAR-HD Manuel utilisateur
evertz
evertz 570DSK-25G Series Manuel utilisateur
evertz
evertz 7800EMR-HYDRA2 Manuel utilisateur
evertz
evertz 570ASI-X19-10GE2 Manuel utilisateur
evertz
evertz 7700 Series Manuel utilisateur
evertz
evertz EMX Series Manuel utilisateur
evertz
evertz 7825DSK2-LG-HD Manuel utilisateur
evertz
evertz 9540 Manuel utilisateur
evertz
evertz 3067VIP-3G-36x4 Manuel utilisateur
evertz
evertz 9767VIP8-NGI Manuel utilisateur
evertz
evertz 570DSK-12G-F Manuel utilisateur
evertz
evertz 3067VIP10G Series Manuel utilisateur
evertz
evertz 2400PSUA-8 Manuel utilisateur
evertz
evertz 570ACO-X19-10G Series Manuel utilisateur
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
