Evertz 7700 MultiFrame Manuel utilisateur

7700/7800 MultiFrame

7800DA2T-3G 3G/HD/SD-SDI Distribution Amplifier

User Manual

EVERTZ MICROSYSTEMS LTD.

5292 John Lucas Drive

Burlington, Ontario

Canada L7L 5Z9

Phone: +1 905-335-3700

Sales: sales@evertz.com Fax: +1 905-335-3573

Tech Support: service@evertz.com Fax: +1 905-335-7571

Web Page: http://www.evertz.com

Version 1.0, August 2018

The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of

purchasers of the 7800DA2T-3G product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the

operation of the 7800DA2T-3G product. Due to on going research and development, features and specifications in this manual are subject to

change without notice.

this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS

The lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated “Dangerous voltage”

within the product’s enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (Servicing) instructions

in the literature accompanying the product.

•Read these instructions

•Keep these instructions.

•Heed all warnings.

•Follow all instructions.

•Do not use this apparatus near water

•Clean only with dry cloth.

•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

•Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles and the point where they exit from the apparatus.

•Only use attachments/accessories specified by the manufacturer

•Unplug this apparatus during lightning storms or when unused for long periods of time.

•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC –

SHOCK, DO NOT EXPOSE THIS APPARATUS

TO RAIN OR MOISTURE

WARNING

DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO

OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT

WARNING

TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE

POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE

WARNING

THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE

NOTE

CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to the European Union EMC directive. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

INFORMATION TO USERS IN THE U.S.A.

NOTE

FCC CLASS A DIGITAL DEVICE OR PERIPHERAL

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

WARNING

Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s

authority to operate the equipment.

Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables

with the shield connected to the chassis ground of the device must be used.

EN60065

Safety

EN504192 2005

Waste electrical products should not be

disposed of with household waste.

Contact your Local Authority for recycling

advice

EN55103-1: 1996

Emission

EN55103-2: 1996

Immunity

7700/7800 MultiFrame Manual

7700/7800 MultiFrame

Page - i Revision 1.0

TABLE OF CONTENTS

1. OVERVIEW ...................................................................................................................................1

2. INSTALLATION.............................................................................................................................3

3. SPECIFICATIONS.........................................................................................................................5

3.1. SERIAL VIDEO INPUT .........................................................................................................5

3.2. SERIAL VIDEO OUTPUTS...................................................................................................5

3.3. ELECTRICAL .......................................................................................................................6

3.4. PHYSICAL............................................................................................................................6

4. STATUS LEDS..............................................................................................................................7

5. CARD EDGE MODULE CONTROL...............................................................................................9

5.1. CARD-EDGE CONTROL......................................................................................................9

5.1.1. Navigating the Card-Edge..........................................................................................9

5.2. CARD-EDGE MENU STRUCTURE ......................................................................................9

5.3. SETTING THE DISPLAY ORIENTATION.............................................................................9

5.4. PRESET PARAMETERS....................................................................................................10

5.4.1. Saving Presets ........................................................................................................10

5.4.2. Loading Presets.......................................................................................................10

6. VISTALINK®MODULE CONTROL .............................................................................................11

6.1. WHAT IS VISTALINK®? .....................................................................................................11

6.2. GENERAL...........................................................................................................................12

6.2.1. Information...............................................................................................................12

6.3. VIDEO CONTROL ..............................................................................................................13

6.4. PRESETS CONTROL.........................................................................................................14

6.4.1. Presets ....................................................................................................................14

6.5. MONITOR...........................................................................................................................15

6.5.1. Video Status............................................................................................................15

7700/7800 MultiFrame Manual

7700/7800 MultiFrame

Page - ii Revision 1.0

6.6. INPUT 1 FAULT TRAPS.....................................................................................................16

6.7.INPUT 2 FAULT TRAPS.....................................................................................................17

7. JUMPERS AND USER ADJUSTMENTS ....................................................................................19

7.1. SELECTING WHETHER LOCAL FAULTS WILL BE MONITORED BY THE GLOBAL FRAME

STATUS .............................................................................................................................19

7.2. CONFIGURING THE MODULE FOR FIRMWARE UPGRADES.........................................19

8. UPGRADE PROCEDURES.........................................................................................................21

8.1. UPGRADE FIRMWARE......................................................................................................21

8.2. UPDATING VLPRO SERVER JAR FILE............................................................................22

Figures

Figure 1-1 : 7800DA2T-3G Block Diagram.....................................................................................2

Figure 2-1 : 7800DA2T-3G/7800DA2T-HD Rear Panels................................................................3

Figure 4-1 : Status LEDs................................................................................................................7

Figure 6-1 : VistaLINK®PRO - General Section...........................................................................12

Figure 6-2 : VistaLINK®PRO - Video Control Section..................................................................13

Figure 6-3 : VistaLINK®PRO - Presets Control Section...............................................................14

Figure 6-4 : VistaLINK®PRO - Monitor Section............................................................................15

Figure 6-5 : VistaLINK®PRO - Input 1 Fault Traps Section..........................................................16

Figure 6-6 : VistaLINK®PRO - Input 2 Fault Traps Section..........................................................17

Figure 7-1 : LED and Jumper Locations.......................................................................................19

Figure 8-1 : VistaLINK®PRO - Version information selection.......................................................21

Figure 8-2 : VistaLINK®PRO - Version Information Window........................................................22

Figure 8-3 : VistaLINK®PRO - Upgrade Firmware Window .........................................................22

Figure 8-4 : VistaLINK®PRO Server/Apply Update......................................................................23

Figure 8-5 : VistaLINK®PRO – Applying JAR Updates................................................................23

7700/7800 MultiFrame Manual

7700/7800 MultiFrame

Page - iii Revision 1.0

REVISION HISTORY

REVISION DESCRIPTION DATE

1.0 First Revision Aug 2018

Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for

the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of

Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty offered

by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.

Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty is

granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order confirmation.

Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you encounter an error,

please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in equipment design or

specifications.

7700/7800 MultiFrame Manual

7700/7800 MultiFrame

Page - iv Revision 1.0

This page left intentionally blank

7700/7800 MultiFrame Manual

7700/7800 MultiFrame

Revision 1.0 Page - 1

1. OVERVIEW

The 7800DA2T Dual 3G/HD/SD-SDI Reclocking Distribution Amplifier provides high quality distribution of

facility 3G/HD/SD-SDI signals. HD versions support SMPTE ST 292-1 and SMPTE ST 259 signals while

3G versions also support SMPTE 424M signals. This module features dual auto-sensing equalized inputs

with unparalleled cable equalization, making it the most-cost effective and ideal solution for long cable run

environments.

The included dual bypass relays offer failure proof protection for critical paths.

For maximum flexibility, the module can operate in a dual input to three outputs each configuration or as

one input to six output configuration.

The 7800DA2T is VistaLINK®enabled, offering remote monitoring, control and configuration capabilities

via Simple Network Management Protocol (SNMP) giving the flexibility to manage operations, including

signal monitoring and module configuration from SNMP capable control systems (Manager or NMS).

The 7800DA2T occupies one card slot and can be housed in the 3RU 7700FR-C, 7800FR and 7800FR-

QT frames that have a 15-slot capacity. The 7700FC frame controller is required for configuration.

Features:

•HD/SD-SDI dual input with three reclocked outputs per input

•Bypass relay protection included for both inputs

•Support for common 3G-SDI video inputs (-3G versions)

•Configurable as one DA with six outputs or two DAs with three outputs each (1x6 or 2 - 1x3)

•Industry leading long reach cable performance

•Input signal presence detection

•High density approach offers 14 modules within 3RU (28 DA’s in 3RU)

•Real time VistaLINK®monitoring and trending for SNMP monitoring



NOTE: From this point forward, the 7800DA2T-3G and the 7800DA2T-HD modules will be

referred to as the 7800DA2T, unless the feature in question is applicable only to one of the

modules, in which case the specific model number will be referenced.

7700/7800 MultiFrame Manual

7700/7800 MultiFrame

Page - 2 Revision 1.0

Figure 1-1 : 7800DA2T-3G Block Diagram

Autres manuels pour 7700 MultiFrame

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels evertz Matériel informatique

evertz

evertz 7800EMR-HYDRA2 Manuel utilisateur

evertz

evertz HDSD9545DLY-PRO Manuel utilisateur

evertz

evertz 9767VIP8-NGI Manuel utilisateur

evertz

evertz QMC-DCP-RP Manuel utilisateur

evertz

evertz 5010 Manuel utilisateur

evertz

evertz 7825DSK2-LG-HD Manuel utilisateur

evertz

evertz 7707VAR-HD Manuel utilisateur

evertz

evertz 9540 Manuel utilisateur

evertz

evertz 570DSK-25G Series Manuel utilisateur

evertz

evertz EMX Series Manuel utilisateur

evertz

evertz 570DSK-12G-F Manuel utilisateur

evertz

evertz X0400 Series Manuel utilisateur

evertz

evertz 570ACO-X19-10G Series Manuel utilisateur

evertz

evertz 7700 Series Manuel utilisateur

evertz

evertz 570ASI-X19-10GE2 Manuel utilisateur

evertz

evertz 3067VIP10G-3G-HW Manuel utilisateur

evertz

evertz 7780M4-ASI Manuel utilisateur

evertz

evertz 7700 Series Manuel utilisateur

evertz

evertz 3067VIP10G Series Manuel utilisateur

evertz

evertz QMCsetup Manuel utilisateur

evertz

evertz S7720AD-A4-LTC Manuel utilisateur

evertz

evertz 7800EMR-ALINK2 Manuel utilisateur

evertz

evertz 3067VIP-3G-36x4 Manuel utilisateur

evertz

evertz 2400PSUA-8 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

evertz 7700 MultiFrame Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques