EtherWAN EX78162 Series Manuel utilisateur

EX78162 rev. 2.0

4/28/2016

W70G-EX78162Q2

EX78162 Series Hardened Managed Ethernet Switch

Installation Guide

Unpacking

Unpack the items. Your package should include:

One EX78162 Series hardened managed

switch

One CD containing this user’s guide

If items are missing or damaged, notify your

EtherWAN representative. If possible, save the

carton and packing material in case you need to

ship or store the switch in the future.

2 What Else You Need

Category 5 or better cable for RJ-45 ports

Appropriate SFP cable for SFP ports

Personal computer with a DB9 straight cable

3 Select a Location

Installations: Desktop, Wall-mount, DIN-Rail

mount.

Identify a power source within 6 feet (1.8

meters).

Choose a dry area with ambient temperature

between -40 and 75ºC (-40 and 167ºF).

Be sure there is adequate airflow.

4 Connect to the Data Ports

Depending on the model, your switch can have

the following ports:

16 10/100BASE-TX Power over Ethernet (PoE)

ports

2 Gigabit SFP ports

10/100BASE-TX (PoE) Ports

Ports 1 to 16 support Power over Ethernet, and

provide power to networked devices such as IP

Phones, Wireless LAN Access Points, and IP

security cameras. PoE power budget is 240 watts

maximum.

1 Gbps SFP Ports

Your switch model has two 1 Gbps SFP slots. SFP

transceivers can be installed directly into ports

17 – 18. Ensure that the same type of transceiver

is used at both ends of the link and that the

correct type of fiber cable is used.

EX78162 rev. 2.0

4/28/2016

W70G-EX78162Q2

EX78162 Series Hardened Managed Ethernet Switch

Installation Guide

Apply Power

The switch has two pairs of power inputs:

A 52-57VDC terminal block

Only one power input is required to operate the

switch. However, redundant power supply

functionality is supported.

Terminal Block

The switch provides two power inputs on a 52-

57VDC terminal block. Only one power input is

required to operate the switch. The terminal

block has 5 terminal posts.

Pin Description

Power 1 +52-57VDC

−Power Ground

Power 2 +52-57VDC

−Power Ground

Earth Ground

Relay Output Rating 1A @ 250VAC

Relay Output Alarm

The switch provides relay output contacts for

signaling of a user-defined power or port failure.

The relay output can be connected to an alarm

signaling device. Current is 1A at 250VAC.

Power-Up Sequence

When you apply power:

All

Link/ACT

LEDs blink momentarily.

The

Power 1, 2

LED goes ON.

LEDs for every port connected to a device

flash, as the switch conducts a brief Power

On Self-Test (POST).

6 Console Configuration

Connect to the switch console by connecting

the DB-9 cable to the console port of the

switch and to the serial port of the computer

running a terminal emulation application

(such as Hyperterminal or Putty).

Configuration settings of the terminal-

emulation program: Baud rate: 115,200bps,

Data bits: 8, Parity: none, Stop bit: 1, Flow

control: none.

The default login name is “root,” no

password.

7 Web Configuration

Log in to the switch by launching a web

browser and entering 192.168.1.10 in the

address bar.

Enter the default login ID: root (no password)

and click “Login.” The system information

screen will display as shown below.

Autres manuels EtherWAN Changer

EtherWAN

EtherWAN EX94000 Manuel utilisateur

EtherWAN

EtherWAN EX19082 Manuel utilisateur

EtherWAN

EtherWAN EX73900 Series Manuel utilisateur

EtherWAN

EtherWAN EX89000 Manuel utilisateur

EtherWAN

EtherWAN EX1624W Manuel utilisateur

EtherWAN

EtherWAN EX19162 Manuel utilisateur

EtherWAN

EtherWAN EX17082 Manuel utilisateur

EtherWAN

EtherWAN EX42908 series Manuel utilisateur

EtherWAN

EtherWAN EX17008 Manuel utilisateur

EtherWAN

EtherWAN ER59000 Series Manuel utilisateur

EtherWAN

EtherWAN EX19162A Manuel utilisateur

EtherWAN

EtherWAN EX72129A Manuel utilisateur

EtherWAN

EtherWAN EX70900 Manuel utilisateur

EtherWAN

EtherWAN SmartE Series Manuel utilisateur

EtherWAN

EtherWAN EX76000 Series Manuel utilisateur

EtherWAN

EtherWAN EX32008 Series Manuel utilisateur

EtherWAN

EtherWAN EX63000 Series Manuel utilisateur

EtherWAN

EtherWAN EX26484 Manuel utilisateur

EtherWAN

EtherWAN TG103H Manuel utilisateur

EtherWAN

EtherWAN EX34000 Manuel utilisateur

EtherWAN

EtherWAN EX17008A Manuel utilisateur

EtherWAN

EtherWAN EX87000 Series Manuel utilisateur

EtherWAN

EtherWAN EX45000 Series Manuel utilisateur

EtherWAN

EtherWAN EX19082 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur