ETC Source Four Mini LED Manuel utilisateur

Source Four Mini LED

User Manual

Part Number: 7063M1220 Rev H

Released: 2023-07

To view a list of ETCtrademarks and patents, go to

etcconnect.com/ip. All other trademarks, both marked and not

marked, are the property of their respective owners.

For a complete list of all third-party licenses that are fully

incorporated herein to the extent required by each third-party

license terms and conditions, please visit etcconnect.com/licenses.

ETC intends this document, whether printed or electronic, to be

provided in its entirety.

Table of Contents

Source Four Mini LED User Manual i

Introduction 1

Safety 2

Installation 4

Install a Lens Tube 4

Install Track-Mounted Luminaire

(OneTrack) 5

Install Track-Mounted Luminaire

(DataTrack) 6

Use the AD1 Track Adapter 7

Install Canopy Luminaire 7

Install Portable Luminaire with C-clamp

(120VOnly) 8

Focus and Setup 9

Adjust the Tilt 9

Lock the Rotation (Canopy and

Track-Mount) 10

Focus the Beam 10

Shape the Beam 10

Use the Color Frame Holder 11

Cleaning 12

Specifications and Reference 13

FCC Compliance 13

ii Source Four Mini LED User Manual

Source Four Mini LED User Manual 1

Introduction

The Source Four Mini LED has three available mounting options:

•Portable: Includes a miniature C-clamp (North America only) and

yoke-mounted driver, and has a permanently installed power cord

with 3-prong Edison connector. Region-specific connectors are

available. Contact ETC for available options. Use L5-15 plugs on

branch circuits with L5-15 receptacles only.

•Track-mount and Canopy:Both the track-mount luminaires and the

canopy luminaire include an integral driver.

You must install a lens tube before you use the Source Four Mini LED. There

are four lens tube sizes available: 19°, 26°, 36°, and 50°. See

Install a Lens

Tube on page4

Canopy

Track-mount

(DataTrack)

Portable

Track-mount

(OneTrack)

Note:

The miniature C-clamp for the portable luminaire is available

only in North America. In the EU and UK, use an M10 bolt to secure

a clamp (provided separately) to the luminaire.

2 Source Four Mini LED User Manual

Yoke

Pattern

holder slot

Shutter

barrel

Lens tube

Color frame

retainer clip

Color

frame

Safety cable

attachment point

Shutters x4

Beam

focus knob

Safety

WARNING: Note the following safety warnings before use:

• Use the luminaire in dry locations only, where humidity

does not exceed 90 percent (non-condensing).

• Do not mount the luminaire on or near a flammable

surface.

• Check that the accessory holder is locked before

mounting the luminaire.

• Do not operate the luminaire without a lens installed.

• Do not use this luminaire if a lens is deeply scratched or

cracked. You must replace a lens when it is damaged.

AVERTISSEMENT : Prendre connaissance des avertissements

de sécurité suivants avant toute utilisation :

• Ne pas installer le projecteur sur ou à côté d’une surface

inflammable.

• Vérifiez que le porte-accessoires est verrouillé avant de

monter le projecteur.

• N’utilisez pas le projecteur sans que la lentille soit

installée.

Source Four Mini LED User Manual 3

IMPORTANT SAFEGUARDS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS

• Keep lamp away from materials that may burn.

• Do not touch hot lens, guard, or enclosure.

• Do not remain in light if skin feels warm.

• Do not look directly at lighted lamp.

• External temperature after 5 minutes of full-brightness operation:

50°C (122°F).

• External temperature when steady state is achieved: 67°C

(152.6°F).

SAVE THESE INSTRUCTIONS

Canopy Luminaire

WARNING: RISK OF ELECTRIC SHOCK! Power must be off

when you perform this procedure.

The luminaire must be installed by a qualified electrician in

accordance with all national and local electrical and

construction codes and regulations.

AVERTISSEMENT : RISQUE DE DÉCHARGE ÉLÉCTRIQUE!

L'alimentation doit étre éteinte avant d'exécuter cette

procédure.

Track-Mount Luminaire

WARNING: To reduce the risk of fire and electric shock, use

the track-mount luminaire only with its designated track

system (for example, One Track or DataTrack).

AVERTISSEMENT : Pour éviter le risque d'incendie ou de

choc électrique, utiliser le luminaire à adaptateur pour rail

uniquement avec son système de rail désigné (OneTrack ou

DataTrack par exemple).

WARNING: Use the DataTrack track-mount luminaire with

ceiling-mounted track only.

4 Source Four Mini LED User Manual

The following symbols may appear on product labeling.

The luminaire must be installed at

least 0.1m (4.0in) away from all

lighted objects.

Le luminaire doit être installé à au

moins 0,1m (4,0po) de tout objet

éclairé.

This product should not be

discarded as unsorted waste but

must be sent to separate collection

facilities for recovery and recycling.

Ce produit ne doit pas être jeté avec

les déchets ménagers mais doit être

déposé dans une collecte de déchets

électroniques ou dans un point de

collecte.

This product meets the safety

requirements specified for Class II

equipment according to IEC 61140

or IEC60536.

Ce produit à Protection Classe II

Double isolation est conforme aux

normes IEC 61140 ou IEC 60536.

Installation

Install a Lens Tube

You must install a lens tube before you use the Source Four Mini LED. There

are four lens tube sizes available: 19°, 26°, 36°, and 50°.

Lens Tube Description

4M19LT (-1, -5) 19° Source Four Mini Lens Tube Only Black (White, Silver)

4M26LT (-1, -5) 26° Source Four Mini Lens Tube Only Black (White, Silver)

4M36LT (-1, -5) 36° Source Four Mini Lens Tube Only Black (White, Silver)

4M50LT (-1, -5) 50° Source Four Mini Lens Tube Only Black (White, Silver)

1. Unscrew the beam focus knob from the loose lens tube.

2. Slide the lens tube into the shutter barrel.

3. Install the beam focus knob.

Source Four Mini LED User Manual 5

Install Track-Mounted Luminaire (OneTrack)

WARNING: To reduce the risk of fire and electric shock, use

the track-mount luminaire only with its designated track

system (for example, One Track or DataTrack).

AVERTISSEMENT : Pour éviter le risque d'incendie ou de

choc électrique, utiliser le luminaire à adaptateur pour rail

uniquement avec son système de rail désigné (OneTrack ou

DataTrack par exemple).

1. Before you begin, verify that the adapter

is unlocked. (Images at right show just

the OneTrack adapter.)

2. Orient the adapter so that the two tabs

are aligned with the groove in the track,

and then insert the adapter into the

track. The tab at the end of the adapter

locks into the track when the fixture is

fully seated.

WARNING: When using

the circuit selection lock,

ensure that the selected

circuit is a constant

power circuit. Selecting a

dimmable circuit may

cause luminaire damage

that will void the ETC

warranty.

Verify adapter

is unlocked

Align tabs

to groove Tab locks

into track

3. Flip the locking tab to the

opposite side to lock the

adapter, and then rotate the

circuit selection knob to

select the correct circuit.

4. Focus the luminaire.

Flip to lock

Rotate to

align circuit

with triangle

6 Source Four Mini LED User Manual

Install Track-Mounted Luminaire (DataTrack)

WARNING: To reduce the risk of fire and electric shock, use

the track-mount luminaire only with its designated track

system (for example, One Track or DataTrack).

AVERTISSEMENT : Pour éviter le risque d'incendie ou de

choc électrique, utiliser le luminaire à adaptateur pour rail

uniquement avec son système de rail désigné (OneTrack ou

DataTrack par exemple).

WARNING: Use the DataTrack track-mount luminaire with

ceiling-mounted track only.

Tabs

Circuit

selection wheel

Lock

1. Insert the DataTrack adapter into

the track. The adapter only fits into

the track one way with the tabs

nesting into the track’s groove.

2. Rotate the locking mechanism to

lock the adapter into place.

WARNING: When using the circuit selection lock,

ensure that the selected circuit is a constant power

circuit. Selecting a dimmable circuit may cause

luminaire damage that will void the ETC warranty.

3. Use the circuit selection lock to select the circuit. The desired circuit

number should point toward the center of the adapter.

4. Focus the luminaire.

5. Lock the luminaire into place using the yoke lock.

Cable protection

posts on both the

yoke lock and the

yoke prevent the

luminaire from

rotating a full

360°. To lock the

yoke in place use

a 1.5 mm hex key.

Autres manuels pour Source Four Mini LED

Table des matières

Autres manuels ETC Équipement d'éclairage

ETC

ETC fos/4 Panel Yoke Manuel utilisateur

ETC

ETC High End Systems SolaPix 19 Manuel utilisateur

ETC

ETC Lustr+ Manuel utilisateur

ETC

ETC High End Systems SolaPix 7 Manuel utilisateur

ETC

ETC ArcLamp System Manuel utilisateur

ETC

ETC CE Source Four Manuel utilisateur

ETC

ETC Lustr+ Manuel utilisateur

ETC

ETC Desire Fresnel Manuel utilisateur

ETC

ETC Halcyon Gold Manuel utilisateur

ETC

ETC fos/4 Fresnel Manuel utilisateur

ETC

ETC Source Four Zoom Manuel utilisateur

ETC

ETC Source Four CE 405 Manuel utilisateur

ETC

ETC Source Four MultiPAR Manuel utilisateur

ETC

ETC Express 24/48 Manuel utilisateur

ETC

ETC Source Four PARNel CE Manuel utilisateur

ETC

ETC XDLT Manuel utilisateur

ETC

ETC Sensor3 Manuel utilisateur

ETC

ETC Source Four Revolution Scroller Cartridge Manuel utilisateur

ETC

ETC Echo Manuel utilisateur

ETC

ETC ColorSource Spot Manuel utilisateur

ETC

ETC Source Four HID jr Manuel utilisateur

ETC

ETC Express 24/48 Manuel utilisateur

ETC

ETC High End Systems SolaPix 7 Manuel utilisateur

ETC

ETC Hog 4 Series Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur