ETC QuickTouch Manuel utilisateur

QuickTouch- Create a Preset

Position Presets

Presets are preprogrammed stopping points.

Each hoist can have one preset recorded.

When a moving hoist reaches a preset position it stops movement.

If the up or down button is released and pressed again the hoist will continue movement past the preset position.

Recording and Deleting Presets

For Multi-hoist Control Stations Setting a preset can be done by any trained and authorized personnel.

It is possible to record preset locations for more than one hoist at a time.

To record a preset:

Step 1: Move the hoist (or hoists) to the desired position .

Step 2: Release the move button when the desired position is reached.

Step 3: Press and release the [Preset] button. Instructions appear on the LCD to press and hold the select buttons for

the desired hoist(s).

Step 4: Press and hold the select buttons for all desired hoists for 5 seconds. The LEDs for those hoists will blink white

during this time. After 5 seconds, all hoists with their select buttons pressed will have their current positions stored as

presets. • Pressing [Clear] during record will deselect all hoists and abort the record operation.

To delete a preset:

Step 1: Press and release the [Preset] button. Instructions appear on the LCD to press and hold the select buttons for

the desired hoist(s).

Step 2: Press and hold the select button(s) for the desired hoist(s) for a total of 10 seconds. At 5 seconds, another

preset record will happen for all selected hoists. Continue holding the button(s) for another 5 seconds and the presets

will be deleted for all selected hoists.

https://support.etcconnect.com/ETC/Rigging/Rigging_Control/QuickTouch/QuickTouch-_Create_a_Preset

Updated: Tue, 14 Sep 2021 15:32:42 GMT

Pressing [Clear] during the delete sequence will deselect all hoists and abort the operation.

For Single Hoist Control Station (QT-1)

To record a preset:

Step 1: Move the hoist to the desired position.

Step 2: Release the move button when the desired position is reached.

Step 3: Press and hold the [Preset] button for 5 seconds. After 5 seconds, the preset is stored.

Step 4: Release the [Preset] button.

To delete a preset:

Step 1: Press and hold the [Preset] button for a total of 10 seconds. At 5 seconds, another preset record will happen.

Continue holding the button for another 5 seconds and the preset will be deleted.

https://support.etcconnect.com/ETC/Rigging/Rigging_Control/QuickTouch/QuickTouch-_Create_a_Preset

Updated: Tue, 14 Sep 2021 15:32:42 GMT

Table des matières

Autres manuels ETC Contrôleurs

ETC

ETC EA07 Manuel utilisateur

ETC

ETC Echoflex ELED2 Manuel utilisateur

ETC

ETC Expression Guide de configuration

ETC

ETC ALiEn2 Manuel utilisateur

ETC

ETC echoflex ELED1 Manuel utilisateur

ETC

ETC QuickTouch Preset Handheld Manuel utilisateur

ETC

ETC ION Manuel utilisateur

ETC

ETC QuickTouch Preset Manuel utilisateur

ETC

ETC Element Manuel utilisateur

ETC

ETC echoflex ELEDR-RH Manuel utilisateur

ETC

ETC Unison Aero Manuel utilisateur

ETC

ETC Echoflex ELED1H Manuel utilisateur

ETC

ETC Unison Foundry Relay Controller Manuel utilisateur

ETC

ETC Unison Aero Relay Controller Manuel utilisateur

ETC

ETC F-Drive W1 Series Manuel utilisateur

ETC

ETC QuickTouch+ Mk2 Manuel utilisateur

ETC

ETC Echoflex ELED3 Manuel utilisateur

ETC

ETC ArcSystem Pro D4 Series Manuel utilisateur

ETC

ETC Echoflex ELED1-BUN Manuel utilisateur

ETC

ETC echoflex ELEDR Manuel utilisateur

ETC

ETC EchoDIN Power Control Processor Mk2 Manuel utilisateur

ETC

ETC Echoflex ELED2-BU Manuel utilisateur

ETC

ETC Unison Mosaic Manuel utilisateur

ETC

ETC PENKO Flex Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur