ETC ETCpad Manuel utilisateur

ETC Setup Guide

ETCpad

Corporate Headquarters



Middleton, WI, USA



Tel +608 831 4116



Service: (Americas) [email protected]om

London, UK



Tel +44 (0)20 8896 1000



Service: (UK)

[email protected]

Rome, IT



Tel +39 (06) 32 111 683



Service: (UK) [email protected]m

Holzkirchen, DE



Tel +49 (80 24) 47 00-0



Service: (DE) techserv-hoki@etcconnect.com

Hong Kong



Tel +852 2799 1220



Service: (Asia) [email protected]

Web: etcconnect.com



Product information and specifications subject to change. ETC intends this document to be provided in its entirety.

4250M2270



Rev B



Released 2019-10

Overview

The ETCpad provides wireless and/or wired access to ETC applications.

ETCpad ships with the following:

• Power Supply

• Network Adapter

• USB Hub Adapter

• Hand Strap

ETCpad

Note:

The device may only be used with ETC applications . Other apps may not be installed on

it.

WARNING:

This device contains a lithium battery. Battery may explode if mistreated. Do not

disassemble or dispose of in fire.

Front RearRight Side

Network

Jack

Network

Adapter

Battery

Compartment

Mini

HDMI

Port

Micro USB

Connector

Docking

Port

Power

Switch

Volume

Control

Audio

Jack

ETC Setup Guide

ETCpad

ETCpad Page 2 of 8 ETC

Home Screen

When ETCpad starts up, it will display the home screen.

The home screen displays the icons for any ETC applications installed, settings for the ETCpad, and

application update. Any notifications will display near the bottom of the display.

There are three navigation buttons located at the bottom of the display:

•Back - opens the last screen that you were on.

•Home - opens the home screen.

•Overview - opens a list of recently viewed apps. To open a app, tap on its image. To close an app,

swipe its image either to the left or right.

Back Home Overview

Battery

Indicator

Time

ETC Setup Guide

ETCpad

ETCpad Page 3 of 8 ETC

Settings

Tap on the Settings icon to open the settings display, which shows all the available settings options for the

ETCpad.

About

This display shows information about the ETCpad device, such as the device’s software and current IP

address.

Auto Launch Options

This display allows you to select an app to open immediately when ETCpad is powered on. Tap the box to

select the desired app.

Battery

This display shows the current battery charge percentage, approximate battery life left, and usage by

application since last charge.

While in this display, the battery data does not automatically refresh. To see the most current information,

press Refresh.

Note:

The About display does not show information about the currently installed ETC

applications. Please see the individual application’s About display for app specific

information.

ETC Setup Guide

ETCpad

ETCpad Page 4 of 8 ETC

Date & Time

This display allows you to set the date and time for your device.

The following settings are available:

•Automatic Date & Time - automatically sets the date and time based on the network-provided

information. Enabled by default.

•Automatic Time Zone - automatically sets the time zone based on the network-provided information.

Enabled by default.

•Set Date - opens a calendar to allow you to manually set the current date. Automatic Date & Time

must be disabled first.

•Set Time - opens a clock to allow you to manually set the current time. Automatic Date & Time must

be disabled first.

•Select Time Zone - opens a list of available time zones. Automatic Time Zone must be disabled first.

•Use 24-Hour Format - displays the time in a 24-hour format as HH : MM. Enabled by default. When

disabled, time will display in the 12-hour format (AM/PM).

Display

In this area, you can adjust the display settings.

The following settings are available:

•Brightness Level - adjusts the backlight for the display.

•Adaptive Brightness - when enabled, the device will automatically adjust the backlight based on

external lighting conditions.

•Sleep - allows you to set the period of inactivity before the device will go into sleep mode.

•Lock Screen Rotation - allows you to lock the screen to either portrait or landscape based off of its

current orientation.

•Large Text - when enabled, the text on the device will display in a larger font. This setting does not

affect the installed applications.

Manage Apps

This menu allows you to enable or disable individual apps installed on the ETCpad. If an app is disabled, a

popup will appear asking for confirmation.

ETC Setup Guide

ETCpad

ETCpad Page 5 of 8 ETC

Reset

This display allows you to either reset the network settings or restore the device to factory settings.

Set Connection Type

This options allows you to set the network connection type to either ethernet or WiFi.

Ethernet

In this display, you can configure the device to connect via ethernet by using the network adapter.

The IP settings can be set to either Static (you provide the IP address) or DHCP (IP address is automatically

obtained from a DHCP server).

If Static is selected, you will need to provide the IP Address, Subnet Mask, and Default Gateway.

WiFi

In this display, you can select an available WiFi network to connect to when WiFi is turned on.

Tapping an available network will give you the options to connect to it, forget the network, or cancel out

of this option.

If you tap a connected network, you will have the options to forget the network or cancel out of this

option.

Add Hidden Network

In this display, you can add a WiFi network with a non-broadcasting (hidden) SSID (System Set Identifier).

To add, you will need to enter the SSID, Security type, and IP Settings. The IP settings can be set to either

Static (you provide the IP address) or DHCP (IP address is automatically obtained from a DHCP server). Once

entered, tap Add Network to create.

Accessories

The following accessories are available for use with your ETCpad:

• Network Adapter

• USB Hub

• Hand Strap

• Shoulder Strap

• Replacement Batteries

• VESA Base

•OfficeBase

•Stylus

• MultiTablet Charger (Charges up to 6 tablets)

Note:

You can only select one connection type at a time.

Note:

For a list of which accessories ship with ETCpad, please see Overview on page 1.

ETC Setup Guide

ETCpad

ETCpad Page 6 of 8 ETC

Network Adapter

A network adapter is provided with the ETCpad for wired ethernet connection.

Installing the Network Adapter

1: Remove the four foam screw covers.

2: Remove the four screws using #1 Phillips

screwdriver. You will need these screws to attach

the adapter.

3: Put the adapter in place.

4: Using the screws from step 2, attach the network

adapter.

USB Hub

The USB hub has three USB, one SD, and one MicroSD ports. The USB hub is used for software installation.

For information about software installation on the ETCpad, please see the current ETCpad Release Note.

Hand and Shoulder Straps

There are four connection points on the back of the ETCpad for connecting either a hand or shoulder strap.

The hand strap is attached on a diagonal

for either left or right hand use. The

shoulder strap is attached on a

horizontal line between two connection

points.

Installing the Strap

1: Remove the foam screw covers

from two of the attachment

points.

2: Remove the screws using #1

Phillips screwdriver.

3: Begin to screw in two of the

screws included with your strap

using a 2mm Allen wrench.

4: Slide the ends of the strap onto

the screws and snap into place.

5: Tighten the screws down fully.

You may experience some resistance due to the thread locker patch on the screw.

6: The strap can be adjusted by opening the hook and loop clasp and moving the position of the strap.

Hand Strap Placement Options Shoulder Strap Placement Options

ETC Setup Guide

ETCpad

ETCpad Page 7 of 8 ETC

Replacement Batteries

Additional batteries are available for use as spares or replacements.

Replacing the Battery

1: Carefully lift up on the battery compartment cover using your finger or a small screwdriver to remove

it.

2: Gently pull up on the battery pull tab while releasing the side clips one at a time.

3: Lift battery out of compartment.

4: Place bottom two tabs of the new battery into place.

5: Push down gently on the battery to snap it into place.

6: Replace the battery compartment cover.

Note:

You can check the charge of your battery without turning the device on by pressing on

the Battery Charge Indicator. You will need to remove the battery compartment cover to

view the indicator.

Battery

Pull Tab

Battery Charge

Indicator

Side ClipSide Clip

Battery

Tab

Battery

Tab

ETC Setup Guide

ETCpad

ETCpad Page 8 of 8 ETC

VESA and Office Bases

The VESA and Office bases allow for horizontal docking of the ETCpad.

The following ports are available on both docks:

Note:

Use only one network connection type at a time. If using ethernet while docked, you will

need to use the dock’s ethernet port and not the network adapter on the device.

VESA Base Office Base

Power

Switch

Power

Connector

USB Ports

RS232

Reserved For

Future

Implementation

Ethernet

Port

Table des matières

Autres manuels ETC Unité de contrôle

ETC

ETC UHCI-4 Manuel utilisateur

ETC

ETC EM264 Manuel utilisateur

ETC

ETC SmartModule 2 Manuel utilisateur

ETC

ETC Unison Echo Inspire Manuel utilisateur

ETC

ETC Unison Echo Manuel utilisateur

ETC

ETC EchoTouch Manuel utilisateur

ETC

ETC ColorSource ThruPower Series Manuel utilisateur

ETC

ETC Eos Remote Processor Unit 3 Manuel utilisateur

ETC

ETC P-TS18 Manuel

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur