ERNITEC MicroView MVCLOUD-201 Manuel utilisateur

Quick Start Guide

Network Bullet Camera

MVCLOUD-201

Network Ernitec Cloud Bullet Camera·Quick Start Guide

About this Manual

This Manual is applicable to JCAM-201 Network Ernitec Cloud

Camera.

The Manual includes instructions for using and managing the

product. Pictures, charts, images and all other information here in

after are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to

firmware updates or other reasons. Please find the latest version in

the company website

Please use this user manual under the guidance of professionals.

Legal Disclaimer

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF

PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. OUR COMPANY

SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET

SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL

RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS

PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE

APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE

EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL ANDTHE

APPLICABLE LAW, THE LATER PREVAILS.

Network Ernitec Cloud Bullet Camera·Quick Start Guide

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own

expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized European

standards listed under the EMC Directive 2004/108/EC, the RoHS

Directive 2011/65/EU.

Network Ernitec Cloud Bullet Camera·Quick Start Guide

2012/19/EU (WEEE directive): Products marked with

this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info

2006/66/EC (battery directive): This product contains

a battery that cannot be disposed of as unsorted

municipal waste in the European Union. See the

product documentation for specific battery

information. The battery is marked with this symbol, which may

include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your supplier or to a

designated collection point. For more information see:

www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards

requirements.

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”

Warnings: Serious injury or death may occur if any of the warnings

are neglected.

Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Network Ernitec Cloud Bullet Camera·Quick Start Guide

Warnings

●In the use of the product, you must be in strict compliance with

the electrical safety regulations of the nation and region. Please

refer to technical specifications for detailed information.

●Input voltage should meet both the SELV (Safety Extra Low

Voltage) and the Limited Power Source with 12 VDC according to

the IEC60950-1 standard. Please refer to technical specifications

for detailed information.

●Do not connect several devices to one power adapter as adapter

overload may cause over-heating or a fire hazard.

●Please make sure that the plug is firmly connected to the power

socket. When the product is mounted on wall or ceiling, the

device shall be firmly fixed.

●If smoke, odor or noise rise from the device, turn off the power

at once and unplug the power cable, and then please contact

the service center.

Warnings Follow these

safeguards to prevent

serious injury or death.

Cautions Follow these

precautions to prevent

potential injury or material

damage.

Network Ernitec Cloud Bullet Camera·Quick Start Guide

●Proper configuration of all passwords and other security settings

is the responsibility of the installer and/or end-user.

Cautions

●Make sure the power supply voltage is correct before using the

camera.

●Do not drop the camera or subject it to physical shock.

●Do not touch sensor modules with fingers. If cleaning is

necessary, use clean cloth with a bit of ethanol and wipe it

gently. If the camera will not be used for an extended period,

please replace the lens cap to protect the sensor from dirt.

●Do not aim the camera at the sun or extra bright places.

Blooming or smearing may occur otherwise (which is not a

malfunction), and affect the endurance of sensor at the same

time.

●The sensor may be burned out by a laser beam, so when any

laser equipment is in using, make sure that the surface of sensor

will not be exposed to the laser beam.

●Do not place the camera in extremely hot, cold (the operating

temperature shall be-30°C ~+60°C, or -40°C ~ +60°C if the

camera model has an “H” in its suffix), dusty or damp locations,

and do not expose it to high electromagnetic radiation.

●To avoid heat accumulation, good ventilation is required for

operating environment.

●Keep the camera away from liquid while in use.

Network Ernitec Cloud Bullet Camera·Quick Start Guide

●While in delivery, the camera shall be packed in its original

packing, or packing of the same texture.

●Regular part replacement: a few parts (e.g. electrolytic

capacitor) of the equipment shall be replaced regularly

according to their average enduring time. The average time

varies because of differences between operating environment

and using history, so regular checking is recommended for all the

users. Please contact with your dealer for more details.

●Improper use or replacement of the battery may result in hazard

of explosion. Replace with the same or equivalent type only.

Dispose of used batteries according to the instructions provided

by the battery manufacturer.

●If the product does not work properly, please contact your

dealer or the nearest service center. Never attempt to

disassemble the camera yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or

maintenance.)

Network Ernitec Cloud Bullet Camera·Quick Start Guide 
 
7
Table of Contents 
Appearance Description ................................................................. 8
1 Overview of Type I Bullet Camera ................................... 8
2 Overview of Type II Bullet Camera ................................ 10 
2.1 Resetting the Camera ......................................... 11 
2.2 Setting the WPS Protocol.................................... 12 
2.3 PoE Power Supply Configuration (Optional)........ 13 
Installation.................................................................................... 14 
1 Installation of the Bullet Camera................................... 15 
2 Installation of Network Cable Water-proof 
Jacket(Optional) ....................................................................... 18 
Setting the Network Camera over the LAN .................................. 21 
1 Wiring ........................................................................... 21 
Register Camera Into Ernitec Cloud Services ................................ 22 
1 Register Camera from dashboard for professionals....... 22 
1.1 Register Camera ................................................. 22 
1.2 Unregister Camera ............................................. 24 
2 Register Camera from the web site Ernitec-Cloud ......... 25 
Download “Ernitec Cloud” App on IOS/Android .......................... 26 
Wifi Network Setup ...................................................................... 29 
1 With WPS button .......................................................... 29 
2 With “Ernitec Cloud” Mobile App Or Ernitec-Cloud              
website…………………………………………………………….………………29 
 
 

Network Ernitec Cloud Bullet Camera·Quick Start Guide

1Appearance Description

1.1 Overview of Type I Bullet Camera

Figure 1-1 Type I Bullet Camera

Network Ernitec Cloud Bullet Camera·Quick Start Guide

Table 1-1 Description

No.

Description

No.

Description

Mounting Base

Lens

Back Box

Sun Shield

Front Box

Power Cable

Reset Button

GND Screw

10/100M Self-adaptive

Ethernet Interface

Type I camera does not support the function of Wi-Fi or SD card.

Press Reset button about 10s when the camera is power on or

rebooting to restore the default settings, including the user name,

password, IP address, port No., etc.

Autres manuels pour MicroView MVCLOUD-201

Table des matières

Autres manuels ERNITEC Caméra de sécurité

ERNITEC

ERNITEC EVA 101 Manuel utilisateur

ERNITEC

ERNITEC Orion DX 822IR Manuel utilisateur

ERNITEC

ERNITEC MicroView MVCLOUD-201 Manuel utilisateur

ERNITEC

ERNITEC Orion SX Series Manuel utilisateur

ERNITEC

ERNITEC SX Manuel utilisateur

ERNITEC

ERNITEC MicroView MVIB-04IR-E Manuel utilisateur

ERNITEC

ERNITEC MicroView MVCLOUD-101 Manuel utilisateur

ERNITEC

ERNITEC Orion DX 832 IR Manuel utilisateur

ERNITEC

ERNITEC ECB Series Manuel utilisateur

ERNITEC

ERNITEC MVID-04IR-E Manuel utilisateur

ERNITEC

ERNITEC Orion/2 Manuel utilisateur

ERNITEC

ERNITEC Performance Series Manuel utilisateur

ERNITEC

ERNITEC DS-2XM6726G0-IS/ND Manuel utilisateur

ERNITEC

ERNITEC EIP Series Manuel utilisateur

ERNITEC

ERNITEC Orion Manuel utilisateur

ERNITEC

ERNITEC Mercury SX4 series Manuel utilisateur

ERNITEC

ERNITEC Mercury SX32 Series Manuel utilisateur

ERNITEC

ERNITEC MicroView MVIB-01IR-E Manuel utilisateur

ERNITEC

ERNITEC Hawk SX Manuel utilisateur

ERNITEC

ERNITEC MicroView MVIC-O4IR-E Manuel utilisateur

ERNITEC

ERNITEC DS-2CD6986F-H Manuel utilisateur

ERNITEC

ERNITEC MicroView MVIC-04IR-E Manuel utilisateur

ERNITEC

ERNITEC MicroView MVID-03IR-E Manuel utilisateur

ERNITEC

ERNITEC Orion/3-DN Outdoor Instructions de montage

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur