ERNITEC Orion DX 3 Manuel utilisateur

Rv01.0.25.07.2018

Orion DX 3

Network PTZ Camera

User’s Manual

Ver. 1

Table of Contents

1. Overview................................................................................................................................3

1.1 Features......................................................................................................................3

1.2 Package Contents .......................................................................................................4

1.3 Dimensions..................................................................................................................5

1.4 Connectors..................................................................................................................6

2. Camera Cabling.....................................................................................................................7

2.1 Power Connection .......................................................................................................8

2.2 Ethernet Cable Connection..........................................................................................8

2.3 Audio / AIarm I/O & RS-485 Connection......................................................................9

3. System Requirements ........................................................................................................10

4. Access Camera ...................................................................................................................11

5. Setup Video Resolution......................................................................................................14

6. Configuration Files Export / Import ...................................................................................14

7. Tech Support Information ..................................................................................................16

7.1 Delete the Existing DCViewer....................................................................................16

7.2 Setup Internet Security..............................................................................................17

1. Overview

Orion DX 3 is a versatile outdoor PTZ camera that comes with 30x optical zoom

module. It supports up to 4M real-time video in HDR mode. When the camera is

operated in dual stream mode, the primary stream can be set at 720P, 1080P or

2M depending on models, and the secondary stream can be 720P or 1080p at

30 fps. Utilizing the latest technology, Orion DX 3 can stream out video in H.265,

H.264 and MJPEG simultaneously.

The new generation outdoor PTZ camera features servo feedback technology

and electronic image stabilizer (EIS) technology. The servo feedback technology

ensures the Orion DX 3 PTZ to return to the exact position immediately when

encountering external force (e.g. human interference) or environmental vibration.

EIS technology can effectively produce stable images by actively sensing

directional movement of the images and compensating accordingly; this is

particularly useful for PTZ cameras installed at places where environmental

movement (e.g. strong wind, the passing-by heavy vehicles) is constant, and

when high optical zoom is executed.

1.1 Features

Multiple Progressive Scan CMOS Sensor Support up to 2MP Resolution

Up to Powerful 30x Optical Zoom

Multi Codec Support (H.265 / H.264 / MJPEG)

Multi Exposure HDR

Quad Streams Support

BNC Analog Output for Installation Support

RS-485 Support

Electrical Image Stabilizer (EIS) Support

3D Motion Compensated Noise Reduction (MCTF)

Smart Event Function- External Output/ Motion Detection/ Network Failure

Detection/ Periodical Event/ Manual Trigger/ Audio Detection

Text Overlay and Privacy Masks

Micro SD/SDHC/SDXC Card Support

ONVIF Profile S/G/Q Support

Smart Low Bitrate Control

Weatherproof (IP66)

Vandal Proof (IK10 Rating)

Servo Feedback- Improve the Mechanism from Stalling

Zero-Down-Time(ZDT) Power Switching

1.2 Package Contents

Please check the box contains the items listed here. If any item is missing or has

defects, DO NOT install or operate the product and contact the dealer for

assistance.

Orion DX 3

Network PTZ Camera

Quick Guide

M4 Security Screw

with Rubber

2-Pin Power

Terminal Block (DC12V Use)

3-Pin Power

Terminal Block (AC 24V Use)

14-Pin Alarm/Audio I/O

Terminal Block

NOTE: To use an external power supply, please contact the camera

manufacturer to confirm that the power supply uses the same power

specifications as the camera. The power supply must comply with the

LPS requirements.

NOTE: This camera contains replaceable batteries. To prevent explosion

risks, confirm the battery type before replacement. Dispose of used

batteries in accordance with the local regulations.

1.3 Dimensions

1.4 Connectors

Refer to the diagrams below for the positions of the reset button and various

connectors of the camera. Definition of the reset button and the connectors are

given as follow.

No.

Connector

Definition

Power Connector

(DC12V)

DC12V power connection

Console Connector

This connector is used to burn firmware into

the camera when the camera is returned for

repair/maintenance. Please contact the

camera manufacturer for further information.

RJ-45 Port

For network and PoE+ connections

Power Connector

(AC24V)

AC24V power connection

BNC

For analog video output

Audio/Alarm I/O

& RS-485 Connector*

Audio/Alarm I/O & RS-485 connection

Reset Button

Press the button with a proper tool for at least

20 seconds to restore the system.

SD Card Slot

Open the dome cover to reveal the SD Card

Slot. Insert the SD card into the card slot to

store videos and snapshots. Do not remove

the SD card when the camera is powered on.

*Do NOT connect external power supply to the alarm I/O connector of the camera.

NOTE: It is not recommended to record with the SD card for 24/7

continuously, as it may not be able to support long term continuous data

read/write. Please contact the manufacturer of the SD card for information

regarding the reliability and the life expectancy.

2. Camera Cabling

The outdoor models are being IP66-rated to prevent water from entering the

camera. However, water might still enter the camera if it is being improperly

installed. Please make sure the warnings below are strictly followed when

installing the camera.

NOTE: This camera must be installed by qualified personnel and the

installation should conform to all local codes.

Place all cables and the adaptor in dry and well-waterproofed

environments, e.g. waterproof boxes. The purpose is to prevent moisture

accumulation inside the camera and moisture penetration into cables.

While running cables, slightly bend the cables to a U-shaped curve to

make a low point (as demonstrated in the figures below). The purpose is

to prevent water from entering the camera along the cables from above.

The cable entry hole of the outdoor mounting kit (indicated in the figure

below) needs to be sealed with thread seal tape to avoid water from

entering the camera.

2.1 Power Connection

To power up the camera, connect the DC12V or AC24V power adaptor to the

power connector of the camera and the power outlet. Refer to the diagram and

pin definition below for AC24V power connection.

Definition

AC24V L

GND

AC24V N

Alternatively, users can use an Ethernet cable and connect it to the RJ-45 port

of the camera and an IEEE 802.3at (PoE+) 2-Pair 30W switch.

Zero Downtime Power Switching (ZDT)

When users connect DC12V power jack and the RJ-45 port at the same time,

the power input comes from the DC12V connector. If the DC12V power source

fails, the camera will switch power input seamlessly to the RJ-45 port until the

DC12V power source is restored.

2.2 Ethernet Cable Connection

To connect one end of the Ethernet cable to the RJ-45 connector of the camera,

and plug the other end of the cable to the network switch or PC.

NOTE: In some cases, Ethernet crossover cable might be needed when

connecting the camera directly to the PC.

NOTE: Check the status of the link indicator and activity indicator LEDs.

If the LEDs are unlit, please check the LAN connection.

Green Link Light indicates good network connection.

Orange Activity Light flashes for network activity indication.

2.3 Audio / AIarm I/O & RS-485 Connection

Please refer to the diagram and pin definition tables below for audio/alarm I/O &

RS-485 connection.

Definition

Audio Out

Alarm Out

Alarm In 4

GND (Alarm

I/O

& RS-485)

GND

(Audio I/O)

Alarm Out

Alarm In 3

Audio In

Alarm Out A1

RS-485 D+

Alarm In 2

Def

Alarm Out A2

RS-485 D-

Alarm In 1

Definition

Table des matières

Autres manuels ERNITEC Caméra de sécurité

ERNITEC

ERNITEC EIP Series Manuel utilisateur

ERNITEC

ERNITEC MicroView MVCLOUD-101 Manuel utilisateur

ERNITEC

ERNITEC DS-2CD6924G0-IHS Manuel utilisateur

ERNITEC

ERNITEC Orion DX 832 IR Manuel utilisateur

ERNITEC

ERNITEC DS-2CD6986F-H Manuel utilisateur

ERNITEC

ERNITEC Orion/2 Manuel utilisateur

ERNITEC

ERNITEC MicroView MVIB-01IR-E Manuel utilisateur

ERNITEC

ERNITEC Orion/2 Manuel utilisateur

ERNITEC

ERNITEC Mercury SX4 series Manuel utilisateur

ERNITEC

ERNITEC ASTRAL Instructions de montage

ERNITEC

ERNITEC Orion SX Series Manuel utilisateur

ERNITEC

ERNITEC MicroView MVIB-01IR-E Manuel utilisateur

ERNITEC

ERNITEC MicroView MVCLOUD-201 Manuel utilisateur

ERNITEC

ERNITEC SX Manuel utilisateur

ERNITEC

ERNITEC MicroView MVIB-04IR-E Manuel utilisateur

ERNITEC

ERNITEC Orion Manuel utilisateur

ERNITEC

ERNITEC MicroView MVID-03IR-E Manuel utilisateur

ERNITEC

ERNITEC DS-2XM6726G0-IS/ND Manuel utilisateur

ERNITEC

ERNITEC Orion DX 822IR Manuel utilisateur

ERNITEC

ERNITEC Orion/2 Mode d’emploi

ERNITEC

ERNITEC ECB Series Manuel utilisateur

ERNITEC

ERNITEC MicroView MVCLOUD-201 Manuel utilisateur

ERNITEC

ERNITEC Mercury SX32 Series Manuel utilisateur

ERNITEC

ERNITEC Hawk SX Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur