Epson BrightLink 475Wi Manuel du système

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

1

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted on the wall or ceiling.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury. If the projector is mounted on the wall or ceiling, stand to

the side in case the lamp is broken.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

4. Slide off the lamp cover.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

2

5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.

6. Lift up the lamp handle and gently pull the lamp out of the projector.

Note: The lamp(s) in this product contain mercury. Please consult your state and local

regulations regarding disposal or recycling. Do not put in the trash.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

3

7. Gently insert the new lamp into the projector along the guide rail. If it does not fit easily, make sure it

is facing the right way. Press the handle down.

Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.

8. Tighten the screws to secure the lamp.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

4

9. Replace the lamp cover and tighten the screw to secure it.

Note: Be sure the lamp cover is securely installed or the lamp will not come on.

Reset the lamp timer to zero to keep track of the new lamp’s usage.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson BrightLink 475Wi / 480i / 485Wi

5

Resetting the Lamp Timer

You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement

message and to keep track of lamp usage correctly.

Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage

information.

1. Turn on the projector.

2. Press the Menu button.

3. Select the Reset menu and press Enter.

4. Select Reset Lamp Hours and press Enter.

You see a prompt asking if you want to reset the lamp hours.

5. Select Yes and press Enter.

6. Press Menu or Esc to exit the menus.

Autres manuels pour BrightLink 475Wi

17

Ce manuel convient aux modèles suivants

2

Table des matières

Autres manuels Epson Projecteur

Epson

Epson EB-W12 Manuel utilisateur

Epson

Epson PowerLite 85 Fiche technique

Epson

Epson EX70 Manuel utilisateur

Epson

Epson EB-450Wi Manuel utilisateur

Epson

Epson Megaplex MG-50 Manuel utilisateur

Epson

Epson PowerLite 82c Manuel utilisateur

Epson

Epson PowerLite L520W Manuel utilisateur

Epson

Epson EMP-7100 Manuel utilisateur

Epson

Epson PowerLite S39 Manuel utilisateur

Epson

Epson PowerLite 420 Manuel utilisateur

Epson

Epson PowerLite 600p Manuel utilisateur

Epson

Epson PowerLite Home Cinema 6500 UB Manuel utilisateur

Epson

Epson 1815p - PowerLite XGA LCD Projector Manuel utilisateur

Epson

Epson PowerLite Cinema 200 Dimensions

Epson

Epson EB-695WI Manuel utilisateur

Epson

Epson MegaPlex MG-850HD Manuel utilisateur

Epson

Epson 5550C - PowerLite SVGA LCD Projector Manuel utilisateur

Epson

Epson dreamio EMP-TW500 Manuel utilisateur

Epson

Epson EB-1795F Manuel utilisateur

Epson

Epson PowerLite S18+ Fiche technique

Epson

Epson brightlink Manuel utilisateur

Epson

Epson EB-810E Manuel utilisateur

Epson

Epson PowerLite 400W Manuel

Epson

Epson PowerLite Cinema 200 Manuel du propriétaire

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manuel utilisateur

JVC

JVC 1108TTH-AO-AO Manuel utilisateur