Emerson Rosemount 1208A Manuel utilisateur

Quick Start Guide

00825-0100-7062, Rev AA

June 2022

Rosemount™ 1208A Level and Flow

Transmitter

Non-Contacting Radar

Contents

About this guide...........................................................................................................................3

Installing on a tank....................................................................................................................... 5

Prepare the electrical connections................................................................................................8

Power up transmitter................................................................................................................. 10

Connect the transmitter to the IO-Link.......................................................................................11

Get started with your preferred configuration tool..................................................................... 12

Perform the basic setup..............................................................................................................14

Quick Start Guide June 2022

2 Rosemount 1208A Level and Flow Transmitter

1 About this guide

This Quick Start Guide provides basic guidelines for the Rosemount 1208A

Level and Flow Transmitter. Refer to the 1208A Reference Manual for more

instructions.

1.1 Safety messages

WARNING

Failure to follow safe installation and servicing guidelines could result in

death or serious injury.

Ensure the transmitter is installed by qualified personnel and in accordance

with applicable code of practice.

Use the equipment only as specified in this Quick Start Guide and the

Reference Manual. Failure to do so may impair the protection provided by

the equipment.

Repair, e.g. substitution of components, etc. may jeopardize safety and is

under no circumstances allowed.

WARNING

Process leaks could result in death or serious injury.

Handle the transmitter carefully.

Install and tighten process connectors before applying pressure.

Do not attempt to loosen or remove process connectors while the

transmitter is in service.

WARNING

Physical access

Unauthorized personnel may potentially cause significant damage to and/or

misconfiguration of end users’ equipment. This could be intentional or

unintentional and needs to be protected against.

Physical security is an important part of any security program and

fundamental to protecting your system. Restrict physical access by

unauthorized personnel to protect end users’ assets. This is true for all

systems used within the facility.

June 2022 Quick Start Guide

Quick Start Guide 3

CAUTION

Hot surfaces

The transmitter and process seal may be hot at high process temperatures.

Allow to cool before servicing.

1.2 Bracket mounting

See the documentation supplied with the bracket kit.

Quick Start Guide June 2022

4 Rosemount 1208A Level and Flow Transmitter

2 Installing on a tank

2.1 Mount the flange

Procedure

1. Place a suitable gasket on the tank flange.

2. Place the flange over the gasket.

3. Tighten the bolts and nuts with sufficient torque for the flange and

gasket choice.

4. Apply appropriate thread sealant to the transmitter threads.

Note

Only for NPT threaded tank connection.

June 2022 Quick Start Guide

Quick Start Guide 5

5. Install and hand tighten the transmitter.

Note

The gasket is necessary for the G threaded version only.

2.2 Mount the NPT threaded adapter

Procedure

1. Apply appropriate thread sealant to the outer threads.

2. Mount the threaded adapter on the tank.

60 mm

Quick Start Guide June 2022

6 Rosemount 1208A Level and Flow Transmitter

3. Apply appropriate thread sealant to the transmitter threads.

4. Install and hand tighten the transmitter.

June 2022 Quick Start Guide

Quick Start Guide 7

3 Prepare the electrical connections

3.1 Connector type

M12 (A-coded)

3.2 Power supply

The transmitter operates on 18-30 Vdc at the transmitter terminals.

3.3 Outputs

The transmitter provides two configurable outputs:

Output 1 Digital output / IO-Link mode

Output 2 Digital output or active 4-20 mA analog output

3.4 Internal power consumption

< 2 W (normal operation at 24 Vdc, no outputs)

< 3.6 W (normal operation at 24 Vdc, digital and analog outputs active)

3.5 Wiring diagram

Figure 3-1: Connection

OUT2

L+

OUT1/IO-Link

Table 3-1: Pin Assignment

Pin Wire color(1) Signal

1 BN Brown L+ 24 V

2 WH White OUT2 Digital output or active 4-20 mA

analog output

3 BU Blue L- 0 V

4 BK Black OUT1/IO-Link Digital output or IO-Link mode

(1) According to IEC 60947-5-2.

Quick Start Guide June 2022

8 Rosemount 1208A Level and Flow Transmitter

Figure 3-2: Example Circuits

2: OUT2

4: OUT1

L+

2: OUT2

4: OUT1

L+

2: OUT2

4: OUT1

L+

2: OUT2

4: OUT1

A. 2 x Digital output PnP

B. 2 x Digital output NpN

C. 1 x Digital output PnP / 1 x Analog output

D. 1 x Digital output NpN / 1 x Analog output

June 2022 Quick Start Guide

Quick Start Guide 9

4 Power up transmitter

Procedure

1. Verify the power supply is disconnected.

2. Insert the M12 connector and screw tight.

See the manufacturer’s instruction manual for recommended

torque.

3. Connect the power supply.

Quick Start Guide June 2022

10 Rosemount 1208A Level and Flow Transmitter

Autres manuels pour Rosemount 1208A

Table des matières

Autres manuels Emerson Émetteur

Emerson

Emerson Rosemount X-STREAM O2 Transmitter Manuel utilisateur

Emerson

Emerson Rosemount 3051N Manuel utilisateur

Emerson

Emerson Rosemount 5408 Manuel utilisateur

Emerson

Emerson Rosemount 326T Manuel utilisateur

Emerson

Emerson Rosemount 644R Manuel utilisateur

Emerson

Emerson Rosemount 1208A Manuel utilisateur

Emerson

Emerson Rosemount 2088 Manuel utilisateur

Emerson

Emerson Micro Motion 5700 Manuel utilisateur

Emerson

Emerson Rosemount 5300 Series Manuel d'exploitation

Emerson

Emerson Rosemount 5081 Manuel utilisateur

Emerson

Emerson Rosemount 3051 Manuel utilisateur

Emerson

Emerson Rosemount Oxymitter 4000 Manuel utilisateur

Emerson

Emerson Rosemount 550PT Manuel utilisateur

Emerson

Emerson Rosemount5081 Manuel utilisateur

Emerson

Emerson Rosemount 3144P Manuel utilisateur

Emerson

Emerson Rosemount 848T Manuel utilisateur

Emerson

Emerson Rosemount 702 Manuel utilisateur

Emerson

Emerson Rosemount 3300 Series Manuel utilisateur

Emerson

Emerson MICRO MOTION 2700 Guide rapide

Emerson

Emerson Rosemount 2051HT Manuel utilisateur

Emerson

Emerson Rosemount Oxymitter 4000 Manuel utilisateur

Emerson

Emerson Rosemount HART Modbus VeriCase 3308 Series Manuel utilisateur

Emerson

Emerson Rosemount 5408 Manuel utilisateur

Emerson

Emerson Rosemount 644 Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur