Dräger INTERLOCK 7 Series Manuel utilisateur

DRÄGER INTERLOCK® 7XXX

User Guide

QLD Performance-Based Alcohol Interlock Program

What is the Dräger Interlock® 7XXX?

The Dräger Interlock® 7XXX is a reliable and precise

alcohol measuring instrument with an integrated vehicle

immobiliser. It prevents a person who consumes alcohol

from starting the vehicle. The Dräger Interlock® 7XXX

consists of two components: handset and control box. If

required, the device can be additionally equipped with a

camera and/or a remote download module.

How does the Dräger Interlock®

7XXX work?

Before you can start the engine, the device measures

the alcohol content in your breath. When no alcohol is

detected, you can drive, however, if alcohol is detected,

you will not be able to start your vehicle. Retests are

required while driving and are carried out at random

intervals. The Dräger Interlock® 7XXX does not interfere

with a running engine. Therefore, your driving will not be

disrupted by the device.

The Dräger Interlock® 7XXX can differentiate between

mouth alcohol and breath alcohol. Mouth alcohol caused

by food and beverages that contain small amounts of

alcohol can affect the test result. You cannot start the

vehicle for a pre-deﬁned period of time if a certain breath

alcohol concentration is detected. The Dräger Interlock®

7XXX records all alcohol readings, vehicle starts, engine

shut-offs and violations. This data is downloaded at each

service and sent to the Department of Transport and Main

Roads for review.

www.draeger.com/interlockqld

Important to know

- Keep the unit clean and dry at all times.

- Use a clean and dry mouthpiece when providing breath

samples.

- Do not eat, consume alcohol, use alcohol-based

products, including mouthwash or smoke for 15 minutes

before using the Dräger Interlock® 7XXX.

- Alcohol can continue to rise for up to 2 hours after your

last drink and it can take further 10 hours for your body

to return to a zero reading after large volumes have been

consumed.

- Make sure ambient air does not contain alcohol or

solvent vapours, e.g. air fresheners.

- Ensure that the breath test is provided from the driver’s

seat in order for the test to be accepted.

- Avoid placing the Dräger Interlock® 7XXX on the vehicle

ﬂoor. If the device is not secured, it may interfere with the

pedals and the safe operation of the vehicle.

- You must not use the Dräger Interlock® 7XXX while

driving. If you are asked for a breath test, you have 7

minutes to pull over and present the breath test. Do not

turn the vehicle off.

- You must not tamper with, abuse, misuse and/ or neglect

the Dräger Interlock® 7XXX or the Dräger Interlock®

7XXX camera. This may result in a sanction and a longer

program period.

- It is recommended to exchange the mouthpiece regularly

and not to share the mouthpiece with another user.

- It is recommended to clean the handset each time after

driving. Click here for FAQ’s.

- Two or more participants can nominate the same vehicle

with a Dräger Interlock® 7XXX installed (Multiple Users).

- Contact your Service Agent with any questions.

www.draeger.com/interlockqld

How do I start the Vehicle?

1. Wait 15 minutes after eating, drinking, smoking or using

alcohol-based products. It is also recommended to rinse

the mouth with water before providing a breath test.

2. Ensure a clean mouthpiece is inserted properly into the

Dräger Interlock® 7XXX.

3. Switch the ignition on.

4. The display will show “Ready for test – Please blow”.

5. Take a deep breath and blow steadily into the

mouthpiece.

6. During the test you will hear the device click three times.

After the third click brieﬂy suck back. The coloured

LEDs and the display will indicate that the breath test is

complete.

The Dräger Interlock® 7XXX will display the following

messages if the blow pattern is correct:

– “Test passed” – A green LED conﬁrms the result and

the vehicle can be started.

– “Test failed” – A red LED conﬁrms the result. In this

case, the vehicle cannot be started.

What if I fail the initial test?

After a failed initial breath test due to detection of alcohol,

the vehicle will not start and a “Temporary Lockout” will

be activated.

A countdown will show on the display the amount of time

remaining before another breath test can be presented.

Once the temporary lockout period has expired, repeat

steps 3 – 6 under “How do I start the vehicle” to present

another breath test.

In case mouth alcohol is detected, the message

“Interferent detected – Repeat test” will appear.

Press the “OK” button, rinse the mouth with water and take

a new test.

www.draeger.com/interlockqld

How do I know if I am blowing and

sucking correctly?

The Dräger Interlock® 7XXX will let you know if you are not

presenting a correct sample. If an error occurs during the

breath test, the device will alert you with audible and visual

signals. If you hear a beep during the measurement, stop

blowing and look at the display. The following guidelines will

help you to ﬁnd and eliminate the problem:

– “Blow longer!” – You need to blow longer.

– “Blow stronger!” – You need to blow harder.

– “Suck after blow” – You did not suck back correctly.

Press the “OK” button to take a new test.

Breath tests while driving

The Dräger Interlock® 7XXX will ask for random breath

tests, Rolling Retests (“retests”), while you are driving.

When a retest is due, the unit will beep and the blue light

will ﬂash. The display will read “Retest required – Please

blow.”

– Pull over, out of trafﬁc when it is safe to do so.

– Don’t panic – You have 7 minutes to provide the breath

sample.

– There is no need to turn the vehicle off.

– Take the breath test as you would to start your vehicle.

Once you see “Test passed” on the display, secure the

device and continue the trip. If you fail or do not provide

a retest within the 7-minute time frame, the vehicle’s horn

will sound and hazard lights will ﬂash. You must pull over

out of trafﬁc and provide a successful breath test or

turn your vehicle off to deactivate the vehicle’s horn and

hazard lights.

www.draeger.com/interlockqld

Violation reset

Excessive violations will cause the Dräger Interlock® 7XXX

to require a service earlier than scheduled and may result

in program extensions. To avoid Violation Resets, it is

important that you adhere to the program rules.

A “VIOLATION RESET” can be caused by:

– Failed breath tests.

– Retests that are not presented within 7 minutes.

– Power loss / battery disconnection of greater than 20

minutes.

– Tampering with the Dräger Interlock® 7XXX.

– Trying to circumvent the Dräger Interlock® 7XXX.

If you see “Device Lockout in 7 days”, you need to contact

your Service Agent to have the Dräger Interlock® 7XXX

serviced. For example, you may be due for a service in 18

days, but violations caused by continually ignoring retest

requests has brought your service date forward. Failure to

service the device within the displayed time will result in a

permanent lockout.

Service requirements

The ﬁrst scheduled service will be one month after the

installation of the Dräger Interlock® 7XXX. Subsequent

servicing will be required at three monthly intervals. The

following services are included in your fees and will occur

at each service:

– Check seals for tampering.

– Check for misuse, abuse or neglect of the unit.

– Download of data for Department of Transport and

Main Roads.

– Test equipment is functioning correctly.

This will take approximately 15 minutes to complete

(20 minutes if a calibration is required).

www.draeger.com/interlockqld

Service requirements

Your scheduled services will be set to the day of installation,

called the anniversary date. For example, if the Dräger

Interlock® 7XXX is installed on the 23rd of January, the next

service date will be set to the 23rd of February.

At each service, your next anniversary date will be

programmed into the Dräger Interlock® 7XXX. The display

will show a reminder message 7 days before your service

is required, warning you that the Dräger Interlock® 7XXX

is due. You are given an additional 7 days grace after your

service date. If your Dräger Interlock® 7XXX is not serviced

within this time, it will enter into a permanent lockout state.

If you have your alcohol interlock serviced during the 7

days grace, your next service date will be set back to the

anniversary date. If the Dräger Interlock® 7XXX is not

serviced within this time a permanent lockout will occur.

This will require you to either request a Service Unlock

Code, or have your vehicle towed to the Service Centre.

Both will be at your expense.

Removal requirements

The Dräger Interlock® 7XXX can be removed upon approval

from the Department of Transport and Main Roads or any

time at your request.

Emergency contacts

All calls are logged, and resulting actions recorded. Please

note that emergency calls resulting from actions caused

by you acting outside the parameters of the program will

be at additional costs and payment prior to a service will

be requested. Only services relating to faulty equipment or

installation, where evidence of tampering, misuse, abuse,

neglect or vehicle accident is not apparent will be free of

charge. However, it is your responsibility to bring the vehicle

with the Dräger Interlock® 7XXX to the Service Centre.

www.draeger.com/interlockqld

For service appointments or emergencies, please contact

your local Dräger authorised Service Agent on:

Draeger Australia Pty. Ltd.

8 Acacia Place

Notting Hill VIC 3168

Phone: 1300 780 689

[email protected]

DSP SE6010 A286 Rev.1

Table des matières

Autres manuels Dräger Instrument de mesure

Dräger

Dräger X-am 5600 Manuel utilisateur

Dräger

Dräger X-zone 5000 Manuel du propriétaire

Dräger

Dräger PIR 3000 Manuel utilisateur

Dräger

Dräger EM200-E Manuel utilisateur

Dräger

Dräger JM-105 Manuel utilisateur

Dräger

Dräger Polytron 2000 Manuel utilisateur

Dräger

Dräger DrugTest 5000 Manuel utilisateur

Dräger

Dräger Bio-Check F Manuel utilisateur

Dräger

Dräger DrugTest 5000 Manuel utilisateur

Dräger

Dräger X-node Manuel utilisateur

Dräger

Dräger Scio Four Manuel utilisateur

Dräger

Dräger Polytron 5000 Manuel utilisateur

Dräger

Dräger Polytron 8900 UGLD Manuel utilisateur

Dräger

Dräger X-AM 2500 Manuel utilisateur

Dräger

Dräger HFG 000 Series Manuel utilisateur

Dräger

Dräger Aerotest Alpha Manuel utilisateur

Dräger

Dräger FG7500 Manuel utilisateur

Dräger

Dräger X-zone 5000 Manuel utilisateur

Dräger

Dräger Alcotest 5820 Manuel utilisateur

Dräger

Dräger REGARD Manuel utilisateur

Dräger

Dräger FG7000 Manuel utilisateur

Dräger

Dräger X-am 5600 Manuel utilisateur

Dräger

Dräger Polytron 5100 Manuel utilisateur

Dräger

Dräger Alcotest 6000 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur