DIGITIZE DET-16 Manuel utilisateur
DET-16 User Manual
Digitize, Inc.
158 Edison Road
Lake Hopatcong, New Jersey 0 849
Tel: (9 3) 663-1011 Part Number: 002 1-0001
Fax: (9 3) 663-4333 Revision: G
Website: http://www.digitize-inc.com Program Ver.: 1.0.6
Digitize, Inc.
158 Edison Road
Lake Hopatcong, NJ 0 849-221
The Digitize logo (stylized) is a registered trademark of Digitize, Inc.
PROPRIETARY NOTICE
AND
DISCLAIMER
DIGITIZE, INC.
158 EDISON ROAD
LAKE HOPATCONG, NJ 0 849-221
PH: (9 3) 663-1011
FAX: (9 3) 663-4333
E-Mail: info@digitize-inc.com
Website: http://www.digitize-inc.com
This manual has been prepared by DIGITIZE, INC. for use by its licensees, distributors and
customers. The information contained herein is the property of DIGITIZE, INC. and may not
be copied, disclosed or reproduced, in whole or in part, without the prior written approval of
DIGITIZE, INC. Any unauthorized disclosure to, or use of the enclosed information by,
unauthorized third persons shall void any and all representations, warranties and obligations
on the part of DIGITIZE, INC.
DIGITIZE, INC. reserves the right to make changes to the specifications and material
contained herein without prior notice. The information and/or examples (including, but not
limited to circuitry, wiring diagrams, programming, the operation or use shown) described in
this manual are intended solely to illustrate the operating principles of the particular product.
They are not a warranty, representation or guarantee that a particular example or use shown
will perform in a particular situation. They are given for illustration purposes only.
DIGITIZE, INC. shall not be responsible, nor does it represent, that any example of
illustration will perform in a particular environment or practice unless it specifically makes a
representation to that effect.
The material set f rth herein is f r inf rmati nal purp ses nly, and
DIGITIZE, INC. assumes n patent liability with respect t any inf rmati n r
illustrati ns c ntained herein.
Table of Contents
1 Introduction.................................................................................................. 1
1.1 System Description .............................................................................................................................. 1
1.2 Specifications ....................................................................................................................................... 3
2 Definitions.................................................................................................... 5
3 System Installation.......................................................................................
3.1 Handling...............................................................................................................................................
3.1.1 Precautions....................................................................................................................................
3.1.2 Unpacking and Inspection ............................................................................................................
3.2 Site Location ........................................................................................................................................
3.3 Installation Details ...............................................................................................................................
4 System Operation....................................................................................... 11
4.1 Power Up ........................................................................................................................................... 11
4.2 Normal Operation .............................................................................................................................. 11
4.3 Battery................................................................................................................................................ 12
4.4 AC Power........................................................................................................................................... 12
4.5 Ground Mode ..................................................................................................................................... 13
4.6 Bulldog............................................................................................................................................... 13
4. Standby Mode .................................................................................................................................... 13
4.8 Alarm Relay ....................................................................................................................................... 14
4.9 Trouble Relay..................................................................................................................................... 14
4.10 Buzzer .............................................................................................................................................. 14
4.11 LCD Display .................................................................................................................................... 14
4.12 Loop Shunt Key Switch ................................................................................................................... 14
5 System Programming................................................................................. 1
5.1 UL 864 Compliance ........................................................................................................................... 1
5.2 4x4+1 Keypad.................................................................................................................................... 1
5.3 How To Modify Panel Settings.......................................................................................................... 18
5.4 Function 1 Zone Settings ................................................................................................................... 18
5.4.1 Setting 1 Zone Box Number ....................................................................................................... 19
5.4.2 Setting 2 Zone Alarm Code ........................................................................................................ 19
5.4.3 Setting 3 Zone Alarm Code Rounds ........................................................................................... 20
5.4.4 Setting 4 Zone Trouble Code...................................................................................................... 20
5.4.5 Setting 5 Zone Trouble Code Rounds......................................................................................... 21
5.4.6 Setting 6 Zone Alarm Restore Code ........................................................................................... 21
5.4. Setting Zone Alarm Restore Code Rounds .............................................................................. 22
5.4.8 Setting 8 Zone Trouble Restore Code......................................................................................... 22
5.4.9 Setting 9 Zone Trouble Restore Code Rounds............................................................................ 23
5.4.10 Setting 10 Disable / Enable Zones ............................................................................................ 23
5.4.11 Setting 11 Preempt Troubles..................................................................................................... 23
5.4.12 Setting 12 Preempt Alarms ....................................................................................................... 24
5.4.13 Setting 13 Preempt Power......................................................................................................... 24
5.4.14 Setting 14 Allow Alarm Preemption......................................................................................... 24
5.4.15 Setting 15 Allow Trouble Preemption ...................................................................................... 24
5.4.16 Setting 16 Allow Restore Preemption....................................................................................... 25
5.4.1 Setting 1 Zones: Normally Open / Normally Closed .............................................................. 25
5.4.18 Setting 18 Zone Priority............................................................................................................ 25
5.4.19 Setting 19 Zone Alarm Level.................................................................................................... 26
5.4.20 Setting 20 Zone Trouble Level ................................................................................................. 26
5.5 Function 2 Low Battery Settings........................................................................................................ 26
5.5.1 Setting 1 Low Battery Box Number ........................................................................................... 26
5.5.2 Setting 2 Low Battery Code........................................................................................................ 2
5.5.3 Setting 3 Low Battery Rounds.................................................................................................... 2
5.5.4 Setting 4 Low Battery Restore Code........................................................................................... 2
5.5.5 Setting 5 Low Battery Restore Code Rounds ............................................................................. 28
5.6 Function 3 AC Fail Settings............................................................................................................... 28
5.6.1 Setting 1 AC Fail Box Number................................................................................................... 28
5.6.2 Setting 2 AC Fail Code............................................................................................................... 28
5.6.3 Setting 3 AC Fail Rounds ........................................................................................................... 28
5.6.4 Setting 4 AC Fail Restore Code.................................................................................................. 29
5.6.5 Setting 5 AC Fail Restore Code Rounds..................................................................................... 29
5. Function 4 Transmission Speed ......................................................................................................... 29
5.8 Function 5 Open Loop Wait Time ..................................................................................................... 30
5.9 Function 6 Free Loop Wait Time....................................................................................................... 30
5.10 Function Bulldog Loop Wait Time ............................................................................................... 30
5.11 Function 8 Buzzer Timeout.............................................................................................................. 30
5.12 Function 9 ........................................................................................................................................ 31
5.13 Function 10 ...................................................................................................................................... 31
5.14 Function 11 Bulldog......................................................................................................................... 31
5.15 Function 12 Ground Mode ............................................................................................................... 31
5.16 Function 13 Open / Closed Indexing................................................................................................ 31
5.1 Function 14 Change Passnumber ..................................................................................................... 32
5.18 Function 15 Alarm Relay Programming .......................................................................................... 32
5.19 Function 16 Edit Standby Timeout .................................................................................................. 32
5.20 Function 1 Standby Mode .............................................................................................................. 33
5.21 Function 18 Reset Factory Defaults ................................................................................................. 33
5.22 Function 19 AC Power Delay .......................................................................................................... 33
6 Det-16 Programming Utility...................................................................... 35
6.1 Overview............................................................................................................................................ 35
6.2 Installation.......................................................................................................................................... 35
6.3 Operation............................................................................................................................................ 36
6.3.1 The File Menu............................................................................................................................. 36
6.3.2 The Transfer Menu ..................................................................................................................... 36
6.3.3 The About Menu......................................................................................................................... 3
6.3.4 Editing a Det-16 Configuration .................................................................................................. 3
6.3.5 Main Screen................................................................................................................................ 3
6.3.6 Zone Settings Window................................................................................................................ 38
6.3. Box Settings Window ................................................................................................................. 38
6.3.8 Uploading Firmware to the Det-16 ............................................................................................. 39
6.3.9 Downloading Firmware from the Det-16.................................................................................... 41
6.3.10 Uploading Settings from the Det-16 ......................................................................................... 42
6.3.11 Downloading Settings from the Det-16 .................................................................................... 43
System Testing........................................................................................... 46
8 System Maintenance.................................................................................. 48
8.1 Recommended Maintenance .............................................................................................................. 48
8.2 Battery Maintenance and Replacement.............................................................................................. 48
002 1-0001 Rev. G 05/13 1
1 Introduction
The DIGITIZE Electronic Telegraph Transmitter, 16 Zone (DET-16) is a solid-state
microprocessor coder for use over telegraph hard wire. The DET-16 is designed to operate
with a loop current from 50 mA to 50 mA.
DET-16 Telegraph Transmitter
1.1 System Descripti n
The DIGITIZE DET-16 is a Telegraph Transmitter for Fire and Security Alarms. The unit
has up to 16 End of Line (EOL) resistor zones and includes a CAM lock, AC transformer,
LCD Display with keypad, standby battery and built-in charger. The unit is housed in a steel
enclosure and is suitable for mounting in convenient, out of the way locations on an interior
wall. The DET-16 can be used on the same loop with mechanical Fire Alarm Boxes.
Introduction Digitize Inc.
2 002 1-0001 Rev. G 05/13
Telegraph codes unique to each of the sixteen zones for Trouble, Alarm and Secure as well
as Low Battery and AC Power Fail are transmitted over a 100 milliampere circuit using
PNIS (Positive Non-Interfering Successive) or SNI (Serial Non-Interfering). The DET-16
has line current detection to avoid clashes between more than one transmitting device.
Automatic ground return, a Watch Dog Timer, and a trouble buzzer assure continued main
system operation and operator notification in the event of a box failure.
DET-16 Panel with Enclosure Door Open Revealing the Display Panel.
Transmission speed is adjustable to match existing decoding units, as are the number of
digits for the box number and the last digit for alarm, trouble, and restore. Number of rounds
for each condition is also programmable.
Automatic switchover to battery power is performed upon AC power loss with a low battery
code transmitted if power is not returned in approximately 0 hours (when the battery
voltage drops below 10.5 volts). When the battery voltage drops below 9.5 volts, the unit
bypasses all input circuits to avoid spurious transmission of false alarms.
Introduction Digitize Inc.
002 1-0001 Rev. G 05/13 3
DET-16 Controller B . in Enclosure
1.2 Specificati ns
AC Power In 115 VAC 50/60 Hz @ 250 mA Max.
EOL Inputs 16 Supervised 4. k Ohm End of Line Resistor Inputs
Telegraph Relay Outputs 1 Form C (SPDT) contacts rated for 6 Amps max. @ 24 VDC or
120 VAC.
Alarm Output Contacts 1 Form C (SPDT) contacts rated for 6 Amps max. @ 24 VDC or
120 VAC.
Trouble Output Contacts 1 Form C (SPDT) contacts rated for 6 Amps max. @ 24 VDC or
120 VAC.
Display 4 line x 20 character, 5 x dots with yellow LED backlight.
Viewing Area: 6 mm Wide x 25.2 mm High.
Keypad 4 x4 Conductive Rubber Switchpad
LED Indicators Alarm (Red), Trouble (Yellow), Loop Problem (Yellow),
Watchdog (Red), AC/DC Input (Green)
Beeper 2,200 ± 300 hz. @ 85 dB.
Ethernet 10/100BASE-T Ethernet – Auto-Sensing
USB USB version 2.0
Standby Battery .5 Amp Hour Sealed Lead Acid, Digitize PN 900414-0004
Panel Size 13.5” wide x 15” high x 4“ deep
Construction Electro Galvanized Steel chassis, plastic front bezel
System Weight approx. 18 lbs. including .5 amp hour battery.
Introduction Digitize Inc.
4 002 1-0001 Rev. G 05/13
Table des matières
Autres manuels DIGITIZE Émetteur
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
