DIGITIZE 1221 Manuel utilisateur

1221 RADIO TRANSMITTER OPTION MANUAL

DIGITIZE, INC. 700235-A 6/00 1

Specifications Subject to Change Without Notice

1221 RADIO TRANSMITTER OPTION

Digitize, Inc.

158 Edison Road

Lake Hopatcong, New Jersey 07849

Tel: (973) 663-1011

Fax: (973) 663-4333

Website: http://www.digitize-inc.com

E-Mail: [email protected]

Part Number: 700237-0000

Revision: A

Issue Date: 6/00

2 DIGITIZE, INC. 700237-A 6/00

Specifications Subject to Change Without Notice

1221 RADIO TRANSMITTER OPTION MANUAL

Digitize, Inc.

158 Edison Road

Lake Hopatacong, NJ 07849-2217

The DIGITIZE logo is a registered trademark of Digitize, Inc.

1221 RADIO TRANSMITTER OPTION MANUAL

DIGITIZE, INC. 700235-A 6/00 3

Specifications Subject to Change Without Notice

PROPRIETARY NOTICE

AND DISCLAIMER

DIGITIZE, INC.

158 EDISON ROAD

LAKE HOPATCONG, NJ 07849-2217

PH: (973) 663-1011

FAX: (973) 663-4333

E-Mail: [email protected]

Website: http://www.digitize-inc.com

This manual has been prepared by DIGITIZE, INC. for use by its licensees, distributors

and customers. The information contained herein is the property of DIGITIZE, INC. and

may not be copied, disclosed or reproduced, in whole or in part, without the prior written

approval of DIGITIZE, INC. Any unauthorized disclosure to, or use of the enclosed

information by, unauthorized third persons shall void any and all representations,

warranties and obligations on the part of DIGITIZE, INC.

DIGITIZE, INC. reserves the right to make changes to the specifications and material

contained herein without prior notice. The information and/or examples (including, but

not limited to circuitry, wiring diagrams, programming, the operation or use shown)

described in this manual are intended solely to illustrate the operating principles of the

particularproduct.Theyarenotawarranty,representationorguaranteethataparticular

exampleoruseshownwillperforminaparticularsituation.Theyaregivenforillustration

purposes only. DIGITIZE, INC. shall not be responsible, nor does it represent, that any

example of illustration will perform in a particular environment or practice

unless it specifically makes a representation to that effect.

The material set forth herein is for informational purposes only, and

DIGITIZE,INC.assumesnopatentliabilitywithrespecttoanyinformationorillustrations

contained herein.

4 DIGITIZE, INC. 700237-A 6/00

Specifications Subject to Change Without Notice

1221 RADIO TRANSMITTER OPTION MANUAL

Table of Contents

1.1 OVERVIEW .................................................................................................................................4

1.2 INSTALLATION ..........................................................................................................................4

1.3 1221 RADIO TRANSMITTER SET UP ....................................................................................4

1.3.1 DAILY TEST BOX NUMBER .......................................................................................5

1.3.2 BOX FORMAT ................................................................................................................5

1.3.3 BOX DELAY ....................................................................................................................6

1.3.4 99ZN FORMAT................................................................................................................6

1.3.5 MANUAL TRANSMISSION..........................................................................................6

1.3.6 SET TEST TRANSMISSION TIME .............................................................................7

1221 RADIO TRANSMITTER OPTION MANUAL

DIGITIZE, INC. 700235-A 6/00 5

Specifications Subject to Change Without Notice

1.1 OVERVIEW

P/N 010001-0105 1221 Radio Transmitter Option, 72 – 76 MHz

P/N 010001-0106 1221 Radio Transmitter Option, 132-174 MHz

The 1221 Radio Transmitter option operates with SYSTEM 3500 units only and operates as a

1221 radio transmitter. The 1221 Radio Transmitter option permits the user to program any

dialer, zone or box to transmit any desired box number to the Fire Department receiving system.

However, the Fire Department may have their receiving system set up to only process boxes in

their negative box stack. Be sure to provide the Fire Department with a list of all box numbers

and zones programmed into your unit. Only one box number is used for daily test. The Fire

Department’shardwareandsoftwaremustbeupgradedtopermitentryofalloftheboxnumber(s)

to decode, but not to expect a daily test from the ‘phantom boxes’. In other words, the SYSTEM

3500 may be programmed to send any desired box number via the @X command, but the

SYSTEM 3500 will only report one box number as the daily test.

The1221RadioTransmitter option consistsof: Software,configuratorcard (P/N450526-0001)

and AM Transmitter Assembly (P/N 450387-0001, 72-76 MHz or 450387-0002, 32-174 MHz).

The frequency must be specified at the time the order is placed with the factory.

1.2 INSTALLATION

TheAMTransmitterAssemblyisshippedseparatelyandmustbemounted totheSYSTEM3500,

usingtheself-adhesive Velcro® provided. Connectthe10-pin cable fromtheAM transmitter to

connector P1 on configurator card 400526-0001.

1.2.1 RETROFITINSTALLATION

RetrofitinstallationsrequirethepurchaseoftheCPUVIProgramDiskette(P/N450423-1019)

at an additional charge.

Installconfigurator card on anyavailable serial portonthe rear ofthe System 3500. Upload

new software using CPUVI Program Diskette. When the System 3500 initializes the

following message appears on the display:

1221 RAD @X

is now PORT # F

SET to continue

enter PORT # __

Enter the Port number for the configurator card. Ports cannot be duplicated. The following

message will appear on the thermal paper tape:

PORT # X 1221 @X

8 BIT 1200 BAUD

NO Parity, 1 Stop

Press SET to confirm the other serial port assignments.

6 DIGITIZE, INC. 700237-A 6/00

Specifications Subject to Change Without Notice

1221 RADIO TRANSMITTER OPTION MANUAL

1.3 1221 RADIO TRANSMITTER SET UP

After the 1221 Radio Transmitter option is installed on the unit, the operator will access the Set

Up Mode through the front panel keypad. By pressing the SET button, the operator may step

through all available menus. If pressed for over one second, the SET button will auto repeat.

Directaccess to the1221Radio Transmittermenuis possible byentering the menunumber (26),

pressing SET, and then FUNC. If the password has not yet been entered, it must be entered at

this time (default password is 2222).

After pressing 26 SET and entering the password (if needed), the display will read:

<<Use numeric keys

BX # 888899 4-2

DLY=10 Sec 99Z=Y

MAN=Y TEST=12:08

The following revolving message will scroll across the bottom of the display:

<<Use numeric keys to change value. Press FUNC to move to the next field Press CLEAR to abort.

Press SET for start transfer.

1.3.1 DAILY TEST BOX NUMBER

The box number (BX #) specified here will be used in the daily test from the SYSTEM 3500

totheFireDepartment. Theboxnumbercanbethreetosixdigitslongwithaoneortwodigit

suffix. The protocol of the number must match the Fire Department’s receiving equipment

protocol. For example, if the Fire Department accepts the Digitize 99ZN format, and it uses

four-digitboxnumbers, then the boxnumberentered would be 123499. The1234is the box

number, the 99 indicates the daily test zone. Do not enter leading zeros. If the box number

is 123, simply enter 12399, even if with a four-digit box number system.

Use the numeric keys to change the box number value.

CAUTION!: If the Remove Fuse Bypass note appears on the thermal paper tape, be sure

to remove the jumper from position J1 on the configurator card (P/N 400526-0001).

1.3.2 BOX FORMAT

Press FUNC to move to the box format (4-2) field. The rotating messages changes to:

<<Use ↑↓ keys to change value. Use FUNC to move to next field. Use – to move to previous field.

Press CLEAR to END. All changes are accepted when entered.

Use the arrow keys to select the proper box format to match the Fire Department. Selection

includes: 3-1, 3-2, 4-1, 4-2, 5-1, 5-2, 6-1, and 6-2 formats.

NOTE: If99Z=Yisselected,the‘–2’cannotbechangedtoanyothervalue. Forthisvariable

to be selectable, 99Z=N must be selected.

1221 RADIO TRANSMITTER OPTION MANUAL

DIGITIZE, INC. 700235-A 6/00 7

Specifications Subject to Change Without Notice

1.3.3 BOX DELAY

Press FUNC to move to the Box Delay (DLY =) field. The rotating message remains the

same. Use the arrow keys to change the box delay time.

When using the @X command to prompt an automatic retransmission, this variable

determines how long to delay the radio box before transmission. Select XX (no delay), or

select 01 to 60 seconds. For example, a 10-second delay for box 1234-56 entered at this

screen, together with an @X123456 command entered under user text, will delay the box

transmission 10 seconds. (User text message @ command must be entered without dashes.)

Two soft keys will pop up when the box is queued for transmission. One soft key will allow

immediatetransmission(TX Radio Box Now), whileanothersoft key will allow abortingof

thepending boxtransmission (AbortRadio Box). Thefollowing messagewillappearonthe

display, just above the soft keys:

Will auto TX at end of countdown

//pend box # 1234-56 ALM @ ??

Where ?? is a running countdown of the delay time.

Once the box number is transferred to the transmitter, it cannot be aborted. If more than one

box is queued up, the second box will have to wait until the first box is transmitted with a

variable two to 14-second delay between rounds and an FCC requirement of 60 seconds

between boxes. While the SYSTEM 3500 is delaying the box, the key click sound will

activate once per second. The pending box will transfer to the standby queue with a fixed

15-second delay prior to transmission, unless the box was manually entered. If the box was

manually entered, no delay will apply.

For details on entering user text messages and @ commands, refer to SYSTEM 3500

Installation and Operation Manual: Section 4, User Text and Section 22, @ Commands.

1.3.4 99ZN FORMAT

Press FUNC to move to 99ZN Format field. The rotating message will remain the same.

Usethearrow keys to select ‘Y’(transmitin the 99Zn format) or‘N’ (no 99Zn). Verify with

the Fire Department that they can indeed receive the 99Z format. The 99ZN format will

transmit Alarm, Trouble and Restore conditions.

IMPORTANT!: Anyboxnumberandcodeinthe99Zoneformatcanbetransmitted,except

codes 96, 97, 98 and 99. These codes are reserved for specific use.

96 - Tilt/Tamper

97 - Panel Trouble

98 - AC Power Fail

99 - Daily Test

8 DIGITIZE, INC. 700237-A 6/00

Specifications Subject to Change Without Notice

1221 RADIO TRANSMITTER OPTION MANUAL

1.3.5 MANUALTRANSMISSION

PressFUNCtomovetotheManualTransmission(MAN=)field. Therotatingmessagewill

remain the same.

Use the arrow keys to select ‘Y’ to allow the dispatcher to set up any box and zone number

to transmit via the 1221 transmitter. When manual transmission is used, no delay is

permitted. A ‘N’ will not allow manual box transmissions.

CAUTION!: Only boxes that have been coordinated with the Fire Department should

be entered into the system for transmission. Any other box number may be assigned to

a different facility or may not exist in the Fire Department unit.

1.3.6 SET TEST TRANSMISSION TIME

Press FUNC to move to next field (TEST=). The rotating message will change to:

<<Use numeric keys to change value. Use FUNC to move to next field. Press CLEAR to

abort. Press SET to start transfer.

Use the numeric keys to set the time of day that the SYSTEM 3500 will send a test box to

the Fire Department. The box to be used as a test transmission was designated in the Daily

Test Box Number selection (see Section 1.3.1).

IMPORTANT!: Coordinate manual tranmsission time with the Fire Department.

1221 RADIO TRANSMITTER OPTION MANUAL

DIGITIZE, INC. 700235-A 6/00 9

Specifications Subject to Change Without Notice

IMPORTANTNOTICE:DIGITIZE,INC.productsshouldbetestedeverymonth(underno

circumstances less than every three months) to insure complete and proper operation and

proper input and output connections.

STATEMENT OF LIMITED WARRANTY

Digitize, Inc. ("Digitize") warrants to its distributors, systems houses, end users, and OEMs

("Buyer"), that products manufactured by Digitize are free from defects in materials and

workmanship. Digitize’sobligationsunderthiswarrantyarelimitedto repairingorreplacing,

at Digitize’s option, the part or parts of the products which prove defective in material or

workmanship for 12 months within 15 months after shipment by Digitize. Buyer must pass

along to its initial customer or user ("Customer") a minimum of 12 months’ coverage within

the 15-month warranty period, provided the Buyer gives Digitize prompt notice of any defect

andsatisfactoryproofthereof. ProductsmaybereturnedbyBuyeronlyafteraReturnMaterial

Authorization number ("RMA") has been obtained from Digitize by telephone or in writing.

Buyerwill prepay all freightcharges to returnany products to therepair facility designatedby

Digitize and include the RMA number on the shipping container. Digitize will, at its option,

either repair the defective products or parts or deliver replacements for defective products or

partsonanexchangebasistoBuyer,freightprepaidtotheBuyer. ProductsreturnedtoDigitize

under this warranty will become the property of Digitize. With respect to any products or art

thereof not manufactured by Digitize, only the warranty, if any, given by the manufacturer

thereof, applies.

EXCLUSIONS

This limited warranty does not cover losses or damage which occurs in shipment to or

from Buyer, or are due to, (1) improper installation or maintenance, misuse, neglect, or any

cause other than ordinary commercial or industrial application, or (2) adjustment, repair, or

modifications by other than Digitize-authorized personnel, or (3) improper environment,

excessive or inadequate heating or air conditioning and electrical power failures, surges, or

otherirregularities,or(4)anystatementsmadeaboutDigitize’sproductsbysalesmen,dealers,

distributors or agents, unless confirmed in writing by a Digitize officer. If the firmware or

hardwareisalteredormodifiedbytheBuyer,thisfirmwareandhardwareisnotcoveredwithin

thislimitedwarrantyandtheBuyerbearssoleresponsibilityandliabilityforthatfirmwareand

hardware.

THE FOREGOING DIGITIZE LIMITED WARRANTY IS IN LIEU OF ALL OTHER

WARRANTIES, WHETHER ORAL, WRITTEN, EXPRESSED, IMPLIED, OR

STATUTORY. IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE DO NO APPLY. DIGITIZE’S WARRANTY

OBLIGATIONSAND DISTRIBUTOR’SREMEDIESHEREUNDERARESOLELY AND

EXCLUSIVELY AS STATED HEREIN. DIGITIZE’S LIABILITY, WHETHER BASED

ONCONTRACT,TORT,WARRANTY,STRICTLIABILITY,ORANYOTHERTHEORY,

SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR

DAMAGEISTHEBASISOFTHECLAIM. INNOEVENTSHALLDIGITIZEBELIABLE

FOR ANY LOSS OF PROFITS, LOSS OF USE OF FACILITIES OR EQUIPMENT, OR

OTHER INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Table des matières

Autres manuels DIGITIZE Émetteur

DIGITIZE

DIGITIZE DET-16 Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur