Digital Watchdog MEGAPIX DWC-MF4Wi4 Manuel utilisateur

NOTE: Download All Your Support Materials and Tools in One Place

1. Go to: http://www.digital-watchdog.com/support-download/

2. Search your product by entering the part number in the ‘Search by Product’ search

bar. Results for applicable part numbers will populate automatically based on the

part number you enter.

3. Click ‘Search’. All supported materials, including manuals, Quick Start Guides

(QSG), software and rmware will appear in the results.

WHAT’S IN THE BOX

QSG Manual 1 Set Mount Bolt &

Nut – 2pcs 1 Set

L- W r e n c h 1 Set Mount Plate 1 Set

Template

Sheet for

installing by

Bolt & Nut

1 Set

Screw &

Plastic Anchor

– 3pcs

1 Set

Template

Sheet for

installing by

Plate

1 Set Waterproof

Cap 1 Set

Test Monitor

Cable 1 Set

1. The mounting surface must bear ve times the weight of your camera.

2. Do not let the cables get caught in improper places or the electric line cover

to be damaged. This may cause a breakdown or re.

3. For the installation process, remove the dome cover from the camera module

by loosening the three (3) screws on the dome. Use the wrench provided with

the camera.

4. Using the mounting template sheet or the camera itself, mark and drill the

necessary holes in the wall or ceiling.

6. Attach the main body to the mount bracket by tightening the lock screw

using the six-angle wrench.

7. For soft installation surfaces, use the included metal mount plate. Fix the

mount plate on the mounting surface using the included screws. Then, press

the bottom case onto the mount plate. The three bezels on the case will align

and snap lock onto the plate.

8. To use the camera’s water proof wiring:

(1). Install the LAN cable into .

(2). will be assembled to with a 1/4 turn.

(3). Thread tightly to .

9. Use the camera’s 3-Axis gimbal to adjust the camera’s tilt and angle. The

camera’s maximum tilting angle is 70°.

10. Assemble the dome cover over the camera body and detach the protecting

lm from the dome bubble.

5. Pass the wires through the mount bracket and make all necessary

connections.

a. NETWORK CONNECTIONS – If you are using a PoE Switch, connect the

camera using an Ethernet cable for both data and power.

b. NETWORK CONNECTIONS – If you are using a non-PoE switch, connect

the camera to the switch using an Ethernet cable for data transmission

and use a power adapter to power the camera.

Power Requirements Power Consumption

DC 12V

PoE IEEE 802.3af / PoE Class 2

LED Off: 3W, 250mA

LED On: 4W, 330mA

POWER

NETWORK

Template

Sheet

Reset

Button

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours:

9:00AM – 8:00PM EST, Monday thru Friday

digital-watchdog.com

Attention: This document is intended to serve as a quick reference for initial

set-up. It is recommended that the user read the entire instruction manual for

complete and proper installation and usage.

DWC-MF4Wi4

DWC-MF4Wi6

DWC-MF4Wi8

Quick Start GuideQuick Start Guide

Default Login Information

Username: admin Password: admin

STEP 1 – PREPARING TO MOUNT THE CAMERA

STEP 3 – INSTALLING THE CAMERA

STEP 2 – CABLING THE CAMERA TO EXTERNAL DEVICES

Resetting the camera: To reset the camera, use the tip of a paper clip

or a pencil and press the reset button. Pressing the button for ve (5)

seconds will initiate a camera-wide reset of all the settings, including

network settings.

NOTE: To ensure moisture seal, make sure the o-ring is in place between

and . In extreme environments use of an outdoor rated

sealer is recommended.

NOTE: When using the waterproof cap, crimp the RJ45 connector after

passing the cable through the waterproof cap.

NOTE: Please see the full product manual for web viewer setup,

functions and camera settings options.

Installation using Mount Bolt and Screws:

1. Using the template sheet, make and drill the cabling holes on the wall/ceiling.

2. Secure the two long mounting screws to the camera’s base.

3. Pass the wires through the mount bracket and make all necessary

connections.

4. Mount the camera to the mounting surface by using the 2 mounting nuts.

Rotate the locking discs over the screws until the camera is held tightly from

the mounting surface.

1. To install the camera’s SD Card, locate the SD card slot in the back of the

camera module.

2. Insert a class 10 SD card into the SD card slot by pressing the SD card slot.

3. To remove the SD Card, press the card inward to release from the card slot.

Quick Start Guide

7. To view the camera’s web viewer, click on ‘View Camera Website’. Enter the

camera’s username and password (default: admin/ admin) to login to the

camera.

8. To save the changes made to the camera’s settings, input the ID and PW of

the camera for authentication and click ‘Save’.

9. If the camera needs to be rebooted after the settings were changed, press

the ‘Reboot’ button. The camera will cycle power and will appear back in the

search results once the reboot is complete.

6. The camera’s default network

information is:

Use the DW IP Finder™software to scan the network and detect all MEGApix®

cameras, set the camera’s network settings or access the camera’s web client.

Once the camera’s network settings have been setup properly, you can access

the camera’s web viewer using the DW IP Finder™.

To open the camera’s web viewer:

1. Find the camera using the DW IP Finder™.

2. Double-click on the camera’s view in the results table.

3. Press the ‘View Camera Website’. The camera’s web viewer will open up

in your default web browser.

4. Enter the camera’s username and password (default are admin / admin).

5. If you are accessing the camera for the rst time, install the VLC player for

web les in order to view video from the camera.

Select DHCP if the internet service is dynamic IP. This will allow the camera to

receive its IP address from the DHCP server.

Select STATIC to manually enter the camera’s IP address, subnet mask,

Gateway and DNS information.

Contact your network administrator for more information.

Default TCP/IP information

• IP: DHCP

‘Port Forwarding’ has to be set in your network’s router for external access

to the camera.

Default ID / PW : admin / admin

Network Setup

1. Go to: http://www.digital-watchdog.com

2. Search for ‘IP Finder’ on the quick search bar at the top of the page.

3. The latest IP Finder software will appear in the search results. Click on the

link to download the le to your computer.

4. The software will scan your network for all supported cameras and display

the results in the table. Allow up to 5 seconds for the IP Finder to nd the

camera on the network.

5. Select a camera from the list by double-clicking on the camera’s image

or clicking on the ‘Click’ button under the IP Conf. column. The camera’s

network information will appear. If necessary, you can adjust the camera’s

network type.

STEP 3 – INSTALLING THE CAMERA (CONT.)

NOTE: The camera’s maximum tilting angle is 70°

STEP 4 – MANAGING THE SD CARD

STEP 5 – DW IP FINDER™

STEP 6 – WEB VIEWER

Search for Cameras

Camera’s

Network Settings

View Camera’s

Thumbnail View

Camera’s Firmware

Camera Uptime

Open Camera’s IP

Conguration Screen

Filter Search Results

Camera Name,

Model, IP Address,

and MAC Address

Firmware Upgrade

Rev Date: 01/17

The GUI display may differ by camera models.

Specications and pricing are subject to change without notice.

NOTE: Some Menu options may not be available based on the camera

model. See the full manual for more information.

Ce manuel convient aux modèles suivants

Autres manuels Digital Watchdog Caméra de sécurité

Digital Watchdog

Digital Watchdog DWC-MB45Wi650TW Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGAPIX DWC-MT95WW28TW Manuel utilisateur

Digital Watchdog

Digital Watchdog STAR-LIGHT AHD DWC-D3763WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-B6853WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog STAR-LIGHT DWC-B6263WTIR650 Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-B6563WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-V7553W Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light DWC-B6763TIR Manuel utilisateur

Digital Watchdog

Digital Watchdog STAR-LIGHT AHD DWC-V7753TIR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-VSDG04Mi Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-MC352 Manuel utilisateur

Digital Watchdog

Digital Watchdog V1362DIR Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGApix Ai DWC-XSBA08Mi Manuel utilisateur

Digital Watchdog

Digital Watchdog Starlight DWC-B6563DIR Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-B6853WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog MD421TIR/B Manuel utilisateur

Digital Watchdog

Digital Watchdog PTZ37X Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGApix DWC-MV72Wi28A Manuel utilisateur

Digital Watchdog

Digital Watchdog PTZ39X Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light DWC-V7253 Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-D3863WTIRW Manuel utilisateur

Digital Watchdog

Digital Watchdog STAR-LIGHT Universal HD over Coax... Manuel utilisateur

Digital Watchdog

Digital Watchdog STAR-LIGHT DWC-V4283WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGAPIX DWC-MF5Wi4TWDMP Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur