Digi XTend-PKG Manuel utilisateur

XTEND 900 MHZ WIRELESS MODEM

For use with VEEDER-ROOT EMR³ DATALINK

INSTALLATION INSTRUCTIONS

Manual 577013-859, Rev. C

Page 1 of 13

INTRODUCTION

This Installation Guide Contains the necessary information to Connect the Wireless Modems to the EMR³

Interconnect Box and the Office Computer for running the EMR³ Datalink Program. For Specific

Instructions on Running the Program itself, refer to the Program Manual that is included on the Software

Disk and the Quick Start Guide that is included with the Office Kit.

THE INSTALLATION INSTRUCTION VARY BY MODEM TYPE – FOLLOW THE INSTRUCTIONS FOR

THE SPECIFIC MODEM YOU HAVE.

DESCRIPTION:

The Wireless Kits come in three types:

Kit Number

Description

General Contents and Comments

0846000-030

Office Kit - XTend 900 MHZ -

Americas

The office kit includes:

•Wireless USB modem with standard

antenna,

•Regular USB Cable for connecting the

modem to the office PC,

•Quick Start Guide,

•Installation Guide

•Program Disc. The Program Disc includes

the USB Drivers and the full Program

Manual as a .pdf file.

0846000-031

Truck Kit with Keypad - XTend

900 MHZ - Americas

The Truck Kit with Keypad includes:

•Wireless modem with standard antenna,

•Special RS-232 Cable for Connecting to

Interconnect Box

•Cord grip and Velcro patch

•Installation Guide

•

Optional Keypad for EMR³ Register Head

0846000-032

Truck Kit - XTend 900 MHZ –

Americas

The Truck Kit without Keypad includes:

•Wireless modem with standard antenna,

•Special RS-232 Cable for Connecting to

Interconnect Box

•Cord grip and Velcro patch

•Installation Guide

0846000-033

Optional High Gain Antenna Kit

The Optional High Gain Antenna Kit includes:

•High Gain Antenna

•Mounting bracket

•20 feet of cable with connectors

XTEND 900 MHZ WIRELESS MODEM

For use with VEEDER-ROOT EMR³ DATALINK

INSTALLATION INSTRUCTIONS

Manual 577013-859, Rev. C

Page 2 of 13

INDIVIDUAL MODEM UNIQUE ADDRESS - IMPORTANT

Each Modem has a Unique Address assigned by Veeder-Root. This number is on the label on

the Modem Itself, and on the Modem Box. For each Truck / Interconnect Box, this number is

your traceability from the Specific Truck to the Office Software. The Truck Modem number will

be entered into the Office Software and identified with the specific Truck Number (or other local

identification).

TRUCK KIT MODEM:

XTend 900 MHz, 1 Watt, Serial

Approved for use in the Americas

Unique Address Assigned

By Veeder-Root

Example of Label on Side of Modem

FOR XTEND 900 MHz SERIAL MODEMS

TRUCK MODEM MOUNTING AND CONNECTION:

1. The dip switches on the XTend modem should be set to: 1=ON 2=OFF 3=OFF 4=OFF

5=ON 6=ON

2. Screw the antenna into the modem and hand tighten.

XTEND 900 MHZ WIRELESS MODEM

For use with VEEDER-ROOT EMR³ DATALINK

INSTALLATION INSTRUCTIONS

Manual 577013-859, Rev. C

Page 3 of 13

3. Mount the modem to the back window of the vehicle or other surface of the vehicle using the

Velcro patch provided, or the modem can be attached with screws or bolts using the tabs on

the modem.

4. Add the screw clips and screws to the head of the RS-232 cable, plug into the connector,

and tighten the screws to secure the connector the modem.

WIRING THE SPECIAL RS-232 CABLE INTO THE IB – TRUCK KIT ONLY – XTEND

MODEM:

Power should be off to the Interconnect Box before connections are made.

The special RS-232 cable included with the truck kit provides the communication to the wireless

modem and also the modem power. Modem power is provided from the V+ power coming into

the Interconnect Box. Normally the V+ wire is Red.

Install the cord grip in the interconnect box and connect the cable wires by color according the

pictures. The connectors in the IB are only designed for up to 18 gage wire, so splitting the V+

into the IB may be necessary. You can shorten the cable if you like.

XTEND 900 MHZ WIRELESS MODEM

For use with VEEDER-ROOT EMR³ DATALINK

INSTALLATION INSTRUCTIONS

Manual 577013-859, Rev. C

Page 4 of 13

For XTend Modem: Green is RX, Black is TX, White is Ground, Red is V+

Upon completion of the wiring and power to the IB is turned on, the red light on the modem next to the

RS-232 connector will be on.

Before leaving the vehicle, go to the display, and make sure the PORT 2 ASSIGN under

SETUP, SYSTEM ADDRESS is set to OBC.

•Push the MODE button to get to SETUP, Arrow Up to SYSTEM ADDRESS, NEXT to IB

ADDRESS, Arrow up to PORT 2 ASSIGN, NEXT, if not OBC the Arrow to OBC and ENTER,

ENTER, and ENTER. You can then push the MODE button to get back to Volume Mode.

RS-232

special

cable

RS-232

Connect:

Green RX

Black TX

White

Ground

Red V+

Red to

V+

V+ from

Vehicle

V-

Battery

Ground

Red Light on

with Power

to IB

XTEND 900 MHZ WIRELESS MODEM

For use with VEEDER-ROOT EMR³ DATALINK

INSTALLATION INSTRUCTIONS

Manual 577013-859, Rev. C

Page 5 of 13

FOR XTEND 900 MHZ OFFICE USB MODEMS

XTEND OFFICE KIT INSTALLATION:

1. Screw the antenna into the modem and hand tighten. The antenna should point upwards.

If using the High Gain Antenna, it connects to the same location.

2. Insert the power supply cable connector into the modem completely, and attach the USB

CABLE

3. Plug the power supply into a normal 110 volt outlet, or with the proper non-Americas Plug.

The three green signal lights on the modem will be lit.

4. The modem can sit on a desk, but for best results it should be place as high as possible. Or,

the modem can be attached with Velcro, or screws or bolts using the tabs on the modem to a

surface. A high gain antenna will enhance the modems capability.

5. Attach the other end of the USB Cable to a USB port on your computer.

3 Green

Lights when

power

connected.

Power

supply

connection

XTEND 900 MHZ WIRELESS MODEM

For use with VEEDER-ROOT EMR³ DATALINK

INSTALLATION INSTRUCTIONS

Manual 577013-859, Rev. C

Page 6 of 13

INSTALLING USB MODEM DRIVERS

The Modem is a “plug-and-play” device that should automatically be detected by your PC.

“Found New Hardware Wizard” dialog box appears

1. Verify the Program CD is inserted into the CD Drive.

2. Select the ‘Install from specific list or location (Advanced)’ option; then select

the ‘Next’ button.

3. Select the "Search for best driver in these locations" option and check the

‘Search removable media (CD-ROM...)’ box.

4. Select the ‘Next’ button.

Hardware Installation "Windows Logo Testing" alert box appears

5. Select the ‘Continue Anyway’ button.

6. Select the ‘Finish’ button.

7. Repeat steps 1 through 5 to install the second driver.

8. (Re-boot computer if prompted to do so.)

Once the Modem drivers are successfully loaded the Red LED on the Modem will be lit

indicating a successful USB Link.

XTEND 900 MHZ WIRELESS MODEM

For use with VEEDER-ROOT EMR³ DATALINK

INSTALLATION INSTRUCTIONS

Manual 577013-859, Rev. C

Page 7 of 13

Finding the communications port for using the USB Modem with the DataLink Program

Start, Control Panel

Double Click on System to get the

System Properties Window to the left

XTEND 900 MHZ WIRELESS MODEM

For use with VEEDER-ROOT EMR³ DATALINK

INSTALLATION INSTRUCTIONS

Manual 577013-859, Rev. C

Page 8 of 13

Click on the Hardware Tab

Device Manager Screen:

Click on Device Manager

XTEND 900 MHZ WIRELESS MODEM

For use with VEEDER-ROOT EMR³ DATALINK

INSTALLATION INSTRUCTIONS

Manual 577013-859, Rev. C

Page 9 of 13

Click on the “+” of Ports and you will find the MaxStream USB Modem Communication Port.

Note: If there is no MaxSteam Port, then the Drivers for the MaxStream Modem have not

been loaded. Plug the MaxStream USB Modem into your computer and follow the Plug-

and-Play instructions, or got to Add Hardware on the Control Panel.

For use with the DataLink Software, refer to the Quick Help Guide 577013-860.

High Gain Antenna -Kit 0846000-033

If a high gain antenna is used, it should be located as high as possible. Instead of additional

co-axial cable being added to locate the antenna, a longer USB cable can be added between

the computer and the modem.

When you click on the “+” of

Ports, you will find the

MaxStream PKG-U Modem and

the computer assigned Com port

- In this example “6”.

This Communication Port

Number will be entered on the

Configuration page of the

DataLink program.

XTEND 900 MHZ WIRELESS MODEM

For use with VEEDER-ROOT EMR³ DATALINK

INSTALLATION INSTRUCTIONS

Manual 577013-859, Rev. C

Page 10 of 14

OPTIONAL KEYPAD INSTALLATION:

In order to install the optional Keypad, the Display will need to be disconnected from the wiring

and gently removed from the housing.

1. Remove the cover from the hole in the right side of the display head housing.

2. Put the rubber gasket over the threads on the keypad outlet.

3. Align the gasket and keypad to the holes in the housing and with a T-15 Torx, secure the

keypad to the housing with the screws provided.

4. Insert the display in the housing, gently pushing down to seat completely.

5. Reconnect the wires to the display per the following wiring information:

Autres manuels Digi Modem

Digi

Digi XStream-PKG-U Manuel utilisateur

Digi

Digi XBee-PRO XM-M92-2P Series Manuel utilisateur

Digi

Digi XBee-PRO PKG-U Manuel utilisateur

Digi

Digi XB3-C-G1-UT-001 Manuel utilisateur

Digi

Digi XStream-PKG-R RS-232 Manuel utilisateur

Digi

Digi XStream-PKG-E Manuel utilisateur

Digi

Digi WAN 3G Manuel utilisateur

Digi

Digi 9XTend-PKG-U Manuel utilisateur

Digi

Digi XB3-C-A2-UT series Manuel utilisateur

Digi

Digi XBee-PRO 900HP Manuel utilisateur

Digi

Digi XBee Manuel utilisateur

Digi

Digi XBee3 DigiMesh 2.4 Manuel utilisateur

Digi

Digi XStream-PKG Guide de l'utilisateur

Digi

Digi XLR PRO Manuel utilisateur

Digi

Digi XBee3 Cellular LTE Cat 1 Manuel utilisateur

Digi

Digi 9XTend-PKG-R RS-232 Manuel utilisateur

Digi

Digi Digi XBee SX Manuel utilisateur

Digi

Digi M10 Technical overview and Manuel d'utilisation et d'entretien

Digi

Digi XBee 3 Cellular LTE-M Manuel utilisateur

Digi

Digi XLR PRO Manuel utilisateur

Digi

Digi XStream -PKG- R Manuel utilisateur

Digi

Digi XLR PRO Manuel utilisateur

Digi

Digi XBee Manuel utilisateur

Digi

Digi MF710M Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur