DFI PE21-EC Manuel utilisateur

PE21-EC

PE21-EL

PE21-EC/A

PE21-EL/A

Rev. A+

Mainboard

User’s Manual

60100225

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose. The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Windows® 98, Windows® 98 SE, Windows® ME, Windows® 000,

Windows NT® 4.0 and Windows® XP are registered trademarks of

Microsoft Corporation. Intel® and Pentium® 4 are registered

trademarks of Intel Corporation. VIA is a registered trademark of

VIA Technologies, Inc. Award is a registered trademark of Award

Software, Inc. Other trademarks and registered trademarks of

products appearing in this manual are the properties of their

respective holders.

Caution

To avoid damage to the system:

• Use the correct AC input voltage range.

To reduce the risk of electric shock:

• Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery:

• Danger of explosion if battery incorrectly replaced.

• Replace only with the same or equivalent type recommend by

the manufacturer.

• Dispose of used batteries according to the battery

manufacturer’s instructions.

Joystick or MIDI port:

• Do not use any joystick or MIDI device that requires more than

10A current at 5V DC. There is a risk of fire for devices that

exceed this limit.

FCC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

. Shielded interface cables must be used in order to comply with

the emission limits.

Notice

This user’s manual contains detailed information about the

mainboard. If, in some cases, some information doesn’t match those

shown in the multilingual manual, the multilingual manual should

always be regarded as the most updated version. The multilingual

manual is included in the mainboard package.

To view the user’s manual, insert the CD into a CD-ROM drive. The

autorun screen (Main Board Utility CD) will appear. Click “User’s

Manual”.

Mainboard

This user’s manual is for the PE 1-EC, PE 1-EL, PE 1-EC/A and

PE 1-EL/A mainboards. The differences between these boards are

shown below.

RJ45 LAN port

Diagnostic LEDs

S/PDIF-in connector

S/PDIF-out connector

4CH audio connector





PE21-EL



PE21-EC





PE21-EC/A



PE21-EL/A

Table of Contents

Chapter 1 - Introduction

1.1 Features and Specifications..................................................................................

1. Package Checklist.........................................................................................................

Chapter 2 - Hardware Installation

.1 Mainboard Layout ...................................................................................................

. System Memory...........................................................................................................

.3 Jumper Settings for Clearing CMOS Data........................................

.4 Jumper Settings for Selecting the PS/ Power................................

.5 Jumper Settings for Selecting the USB Power.................................

.6 Jumper Settings for Selecting the CPU’s Front Side Bus......

.7 Por ts and Connectors...........................................................................................

Chapter 3 - Award BIOS Setup Utility

3.1 The Basic Input/Output System.....................................................................

3.1.1 Standard CMOS Features.............................................................

3.1. Advanced BIOS Features..............................................................

3.1.3 Advanced Chipset Features ......................................................

3.1.4 Integrated Peripherals.........................................................................

3.1.5 Power Management Setup............................................................

3.1.6 PnP/PCI Configurations....................................................................

3.1.7 PC Health Status...................................................................................

3.1.8 Frequency/Voltage Control............................................................

3.1.9 Load Fail-Safe Defaults.....................................................................

3.1.10 Load Optimized Defaults..............................................................

3.1.11 Set Supervisor Password...............................................................

3.1.1 Set User Password..............................................................................

3.1.13 Save & Exit Setup.................................................................................

3.1.14 Exit Without Saving..............................................................................

3. Updating the BIOS.....................................................................................................

Introduction

118

Chapter 4 - Supported Softwares

4.1 Desktop Management Interface.................................................................

4. Drivers, Utilities and Software Applications.....................................

4.3 6-Channel Audio Output via Software...............................................

4.4 Installation Notes......................................................................................................

Appendi A - Using the Suspend to RAM

Function

A.1 Using the Suspend to RAM Function...................................................

Appendi B - System Error Messages

B.1 POST Beep....................................................................................................................

B. Error Messages...........................................................................................................

Appendi C - Troubleshooting

C.1 Troubleshooting Checklist.................................................................................

100

111

113

114

1 0

Introduction

1.1 Features and Specifications

1.1.1 Features

Chipset

• VIA® P4X400 chipset

- VT8754/VT8 35CD

Processor

The mainboard is equipped with Socket 478 for installing a Pentium®

4 or Celeron® processor.

• Intel® Pentium® 4 processor (478-pin)

- 533MHz system data bus - supports up to .53 GHz CPU

speed

- 400MHz system data bus - supports up to .4 GHz CPU

speed

• Intel® Celeron® processor (478-pin)

- 400MHz system data bus - supports up to 1.7 GHz CPU

speed

System Memory

• Three 184-pin DDR DIMM sockets

• Supports up to 3GB using PC1600 (DDR 00), PC 100

(DDR 66) or PC 700 (DDR333) unbuffered DDR SDRAM

DIMM, .5V type

Chapter 1 - Introduction

DIMMs

2MBx64

4MBx64

8MBx64

Memory Size

16MB

32MB

64MB

DIMMs

16MBx64

32MBx64

64MBx64

Memory Size

128MB

256MB

512MB

Introduction

Expansion Slots

The mainboard is equipped with 1 universal AGP slot and 6 PCI

slots.

AGP is an interface designed to support high performance 3D

graphics cards. It utilizes a dedicated pipeline to access system

memory for texturing, z-buffering and alpha blending. The universal

AGP slot supports AGP 8x with up to 133MB/sec. bandwidth and

AGP 4x with up to 1066MB/sec. bandwidth for 3D graphics

applications. AGP in this mainboard will deliver faster and better

graphics to your PC.

Onboard Audio eatures

• Supports Microsoft® DirectSound/DirectSound 3D

• AC’97 supported with full duplex, independent sample rate

converter for audio recording and playback

• S/PDIF-in/out compressed digital output (PE 1-EC/A and

PE 1-EL/A only)

• -channel audio output (PE 1-EC and PE 1-EL only)

• 6-channel audio output (PE 1-EC/A and PE 1-EL/A only)

Onboard LAN eatures (PE21-EL and PE21-EL/A only)

• Integrated LAN controller

• Integrated IEEE 80 .3, 10BASE-T and 100BASE-TX compatible

PHY

• 3 -bit PCI master interface

• Integrated power management functions

• Full duplex support at both 10 and 100 Mbps

• Supports IEEE 80 .3u auto-negotiation

• Suppor ts wire for management

Rear Panel I/O Ports (PC 99 color-coded connectors)

• Two USB .0 ports (compliant with USB 1.1)

• One RJ45 LAN port (PE 1-EL and PE 1-EL/A only)

• Two DB-9 serial ports

• One DB- 5 parallel port

• One mini-DIN-6 PS/ mouse port

• One mini-DIN-6 PS/ keyboard port

• One game/MIDI port

• Three audio jacks: line-out, line-in and mic-in

Introduction

I/O Connectors

• Two connectors for 4 additional external USB .0 ports

(compliant with USB 1.1)

• One connector for external line-out and mic-in jacks

• Two internal audio connectors (AUX-in and CD-in)

• One 4-channel audio output connector (PE 1-EC/A and

PE 1-EL/A only)

• One S/PDIF-in connector (PE 1-EC/A and PE 1-EL/A only)

• One S/PDIF-out connector (PE 1-EC/A and PE 1-EL/A only)

• One connector for IrDA interface

• Two IDE connectors

• One floppy drive interface supports up to two .88MB floppy

drives

• Two ATX power supply connectors

• One Wake-On-LAN connector

• One Wake-On-Ring connector

• CPU fan, chassis fan and second chassis fan connectors

PCI Bus Master IDE Controller

• Two PCI IDE interfaces support up to four IDE devices

• Supports ATA/33, ATA/66, ATA/100 and ATA/133 hard drives

• UDMA Modes 3, 4, 5 and 6 Enhanced IDE (data transfer rate

up to 133MB/sec.)

• Bus mastering reduces CPU utilization during disk transfer

• Supports ATAPI CD-ROM, LS-1 0 and ZIP

S/PDI (PE21-EC/A and PE21-EL/A only)

The system board is equipped with the S/PDIF (Sony/Philips Digital

Interface) digital audio interface. S/PDIF is a standard audio file

transfer format that transfers digital audio signals to a device without

having to be converted first to an analog format. This prevents the

quality of the audio signal from degrading whenever it is converted

to analog.

IrDA Interface

The mainboard is equipped with an IrDA connector for wireless

connectivity between your computer and peripheral devices.

Introduction

USB Ports

The mainboard supports 6 USB .0 (compliant with USB 1.1) ports.

USB 1.1 supports 1 Mb/second bandwidth while USB .0 supports

480Mb/second bandwidth providing a marked improvement in

device transfer speeds between your computer and a wide range of

simultaneously accessible external Plug and Play peripherals.

BIOS

• Award BIOS, Windows® 98/ 000/ME/XP Plug and Play

compatible

• Supports SCSI sequential boot-up

• Flash EPROM for easy BIOS upgrades

• Supports DMI .0 function

• Mbit flash memory

Desktop Management Interface (DMI)

The mainboard comes with a DMI .0 built into the BIOS. The DMI

utility in the BIOS automatically records various information about

your system configuration and stores these information in the DMI

pool, which is a part of the system board's Plug and Play BIOS.

DMI, along with the appropriately networked software, is designed

to make inventory, maintenance and troubleshooting of computer

systems easier. Refer to chapter 4 for instructions on using the DMI

utility.

1.1.2 System Health Monitor Functions

The mainboard is capable of monitoring the following “system health”

conditions.

• Monitors the temperature of the CPU and system; and overheat

alarm

• Monitors CPU/3.3V/5V/±1 V/VDIMM/VBAT/5VSB voltages and

failure alarm

• Monitors the fan speed of the CPU fan and chassis fan; and

failure alarm

• Automatic chassis fan on/off control

• Read back capability that displays temperature, voltage and fan

speed

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels DFI Carte mère

DFI

DFI EHL171 Manuel utilisateur

DFI

DFI K6XV3+/66 Manuel utilisateur

DFI

DFI KD630-H110C Manuel utilisateur

DFI

DFI LANPARTY DK X58-T3EH6 Manuel utilisateur

DFI

DFI P2MEX/A Manuel utilisateur

DFI

DFI NB32-SL Manuel utilisateur

DFI

DFI CS636-C246 Manuel utilisateur

DFI

DFI WL051 Manuel utilisateur

DFI

DFI 748-AL Manuel utilisateur

DFI

DFI CS65-EC Manuel utilisateur

DFI

DFI BT253 Manuel utilisateur

DFI

DFI WL051-BCC-B Manuel utilisateur

DFI

DFI LanParty DK P35 series Manuel utilisateur

DFI

DFI GIC68-D Manuel utilisateur

DFI

DFI AD73 RAID Manuel utilisateur

DFI

DFI 915GM-MIGF Manuel utilisateur

DFI

DFI G586VPM Manuel utilisateur

DFI

DFI BT101 Manuel utilisateur

DFI

DFI KT600-AL Manuel utilisateur

DFI

DFI Blood-Iron G41-T33 Manuel utilisateur

DFI

DFI AD72-SC Manuel utilisateur

DFI

DFI LanParty UT NF4 SLI EXPERT Venus Manuel utilisateur

DFI

DFI ICX610-C621A-000G Manuel utilisateur

DFI

DFI CM33-TC Manuel utilisateur

Manuels Carte mère populaires d'autres marques

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur