DFI CM33-TC Manuel utilisateur

CM33-TC

CM33-TL

Rev. A+

System Board

Users Manual

53300142

Copyrig t

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose. The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Microsoft® MS-DOS®, WindowsTM, Windows® 95, Windows® 98,

Windows® 98 SE, Windows® ME, Windows® 000 and Windows

NT® 4.0 are registered trademarks of Microsoft Corporation. Intel®,

Pentium® III and CeleronTM are registered trademarks of Intel

Corporation. VIA CyrixIII is a registered trademark of VIA

Technologies, Inc. Award is a registered trademark of Award

Software, Inc. Other trademarks and registered trademarks of

products appearing in this manual are the properties of their

respective holders.

Caution

To avoid damage to the system:

 Use the correct AC input voltage range.

To reduce the risk of electric shock:

 Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery:

 Danger of explosion if battery incorrectly replaced.

 Replace only with the same or equivalent type recommend by

the manufacturer.

 Dispose of used batteries according to the battery

manufacturers instructions.

Joystick or MIDI port:

 Do not use any joystick or MIDI device that requires more than

10A current at 5V DC. There is a risk of fire for devices that

exceed this limit.

FCC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and the receiver.

 Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

 Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

. Shielded interface cables must be used in order to comply with

the emission limits.

Notice

This users manual contains detailed information about the system

board. If, in some cases, some information doesnt match those

shown in the multilingual manual, the multilingual manual should

always be regarded as the most updated version. The multilingual

manual is included in the system board package.

To view the users manual, insert the CD into a CD-ROM drive. The

autorun screen (Main Board Utility CD) will appear. Click Users

Manual.

System Board

This users manual is for the CM33-TL and CM33-TC system

boards. The differences between these boards are shown below.

CM33-TL

(Supports onboard LAN)

CM33-TC

Realtek RTL8100

RJ45 LAN port

Table of Contents

Chapter 1 - ntroduction

1.1 Features and Specifications..................................................................................

1. Package Checklist.........................................................................................................

Chapter 2 - Hardware nstallation

.1 System Board Layout .............................................................................................

. System Memory.............................................................................................................

.3 Frequency Ratio Settings for Processors................................................

.4 Jumper Settings for Clearing CMOS Data..........................................

.5 Jumper Settings for the Onboard Audio Codec .........................

.6 Jumper Settings for Selecting the USB Power...................................

.7 Ports and Connectors.............................................................................................

Chapter 3 - Award B OS Setup Utility

3.1 The Basic Input/Output System.....................................................................

3.1.1 Standard CMOS Features.............................................................

3.1. Advanced BIOS Features..............................................................

3.1.3 Advanced Chipset Features ......................................................

3.1.4 Integrated Peripherals.........................................................................

3.1.5 Power Management Setup............................................................

3.1.6 PnP/PCI Configurations....................................................................

3.1.7 PC Health Status...................................................................................

3.1.8 Frequency/Voltage Control............................................................

3.1.9 Load Fail-Safe Defaults.....................................................................

3.1.10 Load Optimized Defaults..............................................................

3.1.11 Set Supervisor Password...............................................................

3.1.1 Set User Password..............................................................................

3.1.13 Save & Exit Setup.................................................................................

3.1.14 Exit Without Saving..............................................................................

3. Updating the BIOS.....................................................................................................

ntroduction



Chapter 4 - Supported Softwares

4.1 Desktop Management Interface.....................................................................

4. VIA Hardware Monitor............................................................................................

4.3 VIA Service Pack..........................................................................................................

4.4 Audio Drivers and Software Applications.............................................

4.5 Onboard LAN Drivers for Windows.......................................................

4.6 Graphics Drivers............................................................................................................

4.7 Microsoft DirectX 8.0 Driver.............................................................................

4.8 Drivers and Utilities Installation Notes.....................................................

Appendix A - Using the Suspend to RAM

Function

A.1 Using the Suspend to RAM Function........................................................

Appendix B - System Error Messages

B.1 POST Beep.......................................................................................................................

B. Error Messages..............................................................................................................

Appendix C - Troubleshooting

C.1 Troubleshooting Checklist....................................................................................



ntroduction

1.1 Features and Specifications

1.1.1 Features

Chipset

 VIA® Apollo PLE133T 8601T/8 C686B

Processor

The system board is equipped with Socket 370. It is also equipped

with a switching voltage regulator that automatically detects 1.050V

to 1.8 5V.

 Pentium® III

- FCPGA 133MHz FSB (1.13GHz-1. 6GHz on 0.13µ)

- FCPGA 133MHz FSB (533EB-1GHz)

- FCPGA 100MHz FSB (500E-1.1GHz)

 CeleronTM

- FCPGA 100MHz FSB (≥1. GHz on 0.13µ)

- FCPGA 100MHz FSB (800MHz-1.1GHz)

- FCPGA 66MHz FSB (566MHz-700MHz)

 VIA CyrixIII processor

System Memory

 Supports up to 1GB using VCM (Virtual Channel Memory) or

PC SDRAM DIMM (unbuffered or registered)

 Two 168-pin DIMM sockets

 Uses x64 PC SDRAM, 3.3V

- PC-66 SDRAM DIMM for 66MHz FSB processors

- PC-100 SDRAM DIMM for 100MHz FSB processors

- PC-133 SDRAM DIMM for 133MHz FSB processors

mportant:

If you are using more than one DIMM, make sure you insert

the same type of DIMMs into the DIMM sockets. Using

different types (VCM or PC SDR M) of DIMMs may cause

problems.

Chapter 1 - Introduction

ntroduction



Expansion Slots

The system board is equipped with dedicated PCI slots and 1

shared PCI/CNR slot. The CNR slot supports modem riser card

only.

Onboard Graphics Features

 Integrated rCADE3D D/3D/Video accelerator

- Shares 8MB of the system memory

- Optimized Shared Memory Architecture (SMA)

- High quality DVD video playback

 3D rendering features

- 3 -bit true color rendering

- MPEG- video textures

 D hardware acceleration features

 Motion video architecture

 Software drivers

- Windows® 98/98SE/ME/ 000

- Windows NT® 4.0

Onboard Audio Features

 Supports Microsoft® DirectSound

 Standard v1.0 or v .0 AC'97 codec

 AC97 supported with full duplex, independent sample rate

converter for audio recording and playback

 Downloadable sound (DLS) level-1

 Suppor ts 1W audio amplifier on line-out jack

Onboard LAN Features (CM33-TL only)

 Uses Realtek RTL8100 fast ethernet controller

 Integrated IEEE 80 .3 10BASE-T and 100BASE-TX compatible

PHY

 3 -bit PCI master interface

 Integrated power management functions

 Full duplex support at both 10 and 100 Mbps

D MMs

MBx64

4MBx64

8MBx64

Memory Size

16MB

3 MB

64MB

D MMs

16MBx64

3 MBx64

64MBx64

Memory Size

1 8MB

56MB

51 MB



ntroduction

 Supports IEEE 80 .3u auto-negotiation

 Supports wire for management

ATX Double Deck Ports (PC 99 color-coded connectors)

 Two USB ports

 One RJ45 LAN port (CM33-TL only)

 One NS16C550A-compatible DB-9 serial port

 One DB-15 VGA por t

 One DB- 5 parallel port

 One mini-DIN-6 PS/ mouse port

 One mini-DIN-6 PS/ keyboard port

 One game/MIDI port

 Three audio jacks: line-out, line-in and mic-in

Connectors

 One connector for additional external USB ports

 One 9-pin connector for 1 external serial port

 One connector for IrDA interface

 Two IDE connectors

 One floppy drive interface supports up to two .88MB floppy

drives

 One ATX power supply connector

 One Wake-On-LAN connector

 One Wake-On-Ring connector

 CPU fan and chassis fan connectors

 Two internal audio connectors (AUX-in and CD-in)

 One connector for external line-out and mic-in jacks

PC Bus Master DE Controller

 Two PCI IDE interfaces support up to four IDE devices

 Supports ATA/33, ATA/66 and ATA/100 hard drives

 PIO Mode 3 and Mode 4 Enhanced IDE (data transfer rate up

to 16.6MB/sec.)

 Bus mastering reduces CPU utilization during disk transfer

 Supports ATAPI CD-ROM, LS-1 0 and ZIP

ntroduction



rDA nterface

The system board is equipped with an IrDA connector for wireless

connectivity between your computer and peripheral devices. It

supports peripheral devices that meet the HPSIR and ASKIR

standard.

USB Ports

The system board supports 4 USB ports. Two onboard USB ports

are located at the ATX double deck ports of the board. The J15

connector on the system board allows you to connect more

optional USB ports. These optional USB ports, which are mounted

on a card-edge bracket, will be provided as an option. USB allows

data exchange between your computer and a wide range of

simultaneously accessible external Plug and Play peripherals.

B OS

 Award BIOS, Windows® 95/98/ 000/ME Plug and Play compat-

ible

 Supports SCSI sequential boot-up

 Flash EPROM for easy BIOS upgrades

 Supports DMI .0 function

 Mbit flash memory

Desktop Management nterface (DM )

The system board comes with a DMI .0 built into the BIOS. The

DMI utility in the BIOS automatically records various information

about your system configuration and stores these information in the

DMI pool, which is a part of the system board's Plug and Play

BIOS. DMI, along with the appropriately networked software, is

designed to make inventory, maintenance and troubleshooting of

computer systems easier. Refer to chapter 4 for instructions on using

the DMI utility.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels DFI Carte mère

DFI

DFI LanParty 925X-T2 Manuel utilisateur

DFI

DFI HD330-Q87 Manuel utilisateur

DFI

DFI G5C100-N Manuel utilisateur

DFI

DFI PIC-Q170/H110 Manuel utilisateur

DFI

DFI CW35-TC Manuel utilisateur

DFI

DFI CS620-H310 Manuel utilisateur

DFI

DFI NFII ULTRA-A Manuel utilisateur

DFI

DFI G486VPA Manuel utilisateur

DFI

DFI ADS310-R680E/Q670E Manuel utilisateur

DFI

DFI CMS171 Manuel utilisateur

DFI

DFI 586IHX Manuel utilisateur

DFI

DFI PL610-C622 Manuel utilisateur

DFI

DFI CA34-SC Manuel utilisateur

DFI

DFI PR610-C621 Manuel utilisateur

DFI

DFI CM64-AL Manuel utilisateur

DFI

DFI BL631-D Manuel utilisateur

DFI

DFI CS620 Manuel utilisateur

DFI

DFI LanParty LT P35 Manuel utilisateur

DFI

DFI WB72-SC Manuel utilisateur

DFI

DFI WL053 Manuel utilisateur

DFI

DFI HD330-H81 Manuel utilisateur

DFI

DFI 845GV-MLV Manuel utilisateur

DFI

DFI LT600-DR/D/L Manuel utilisateur

DFI

DFI LanParty X58-T3eH8 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur