DFI AD73 RAID Manuel utilisateur

AD73 RAID

Rev. A+

System Board Users Manual

Carte Mère Manuel Pour Utilisateur

System-Platine Benutzerhandbuch

Manual del Usuario de Placas Base

55000153

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose. The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Microsoft® MS-DOS®, WindowsTM, Windows® 95, Windows® 98,

Windows® 98 SE, Windows® ME, Windows® 000, Windows NT®

4.0 and Windows® XP are registered trademarks of Microsoft

Corporation. AMD, AthlonTM XP, AthlonTM and DuronTM are

registered trademarks of Advanced Micro Devices, Inc. VIA is a

registered trademark of VIA Technologies, Inc. Award is a registered

trademark of Award Software, Inc. Other trademarks and registered

trademarks of products appearing in this manual are the properties

of their respective holders.

Caution

To avoid damage to the system:

 Use the correct AC input voltage range.

To reduce the risk of electric shock:

 Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery:

 Danger of explosion if battery incorrectly replaced.

 Replace only with the same or equivalent type recommend by

the manufacturer.

 Dispose of used batteries according to the battery

manufacturers instructions.

Joystick or MIDI port:

 Do not use any joystick or MIDI device that requires more than

10A current at 5V DC . There is a risk of fire for devices that

exceed this limit.

CC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to tr y to correct the interference by one or more of the

following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and the receiver.

 Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

 Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

. Shielded interface cables must be used in order to comply with

the emission limits.

Quick Setup Guide

Quick Setup

Guide

Table of Contents

Chapter 1

Quick Setup Guide.............................................

Chapter 2

English......................................................................

Chapter 3

Français (French).................................................

Chapter 4

Deutsch (Ger an)................................................

Chapter 5

Español (Spanish)..................................................

Note:

The users manual in the provided CD contains detailed information

about the system board. If, in some cases, some information doesnt

match those shown in this manual, this manual should always be

regarded as the most updated version.

Quick Setup Guide

Quick Setup

Guide

Chapter 1 - Quick Setup Guide

Table of Contents

1.1 System Board Layout..................................................................................................

1. Jumpers.....................................................................................................................................

1.3 Ports and Connectors................................................................................................

1.4 Award BIOS Setup Utility.......................................................................................

Important:

To ensure proper boot up and operation of your system, you must

power-off the system then turn off the power supplys switch or

unplug the AC power cord prior to altering the setting of a umper

or replacing the CPU.

Quick Setup Guide

Quick Setup

Guide

1.1 Syste Board Layout

Socket 462

(Socket A)

Mouse

USB 1

COM 1

Parallel

COM 2

I/O

chip

PCI standby power LED

3.3VSB

standby for

PCI (JP5)

VIA

KT-266A

CPU fan: J21

J13

ATX Power

2nd

chassis fan

J14

Secondary IDE

Primary IDE

FDD

IDE 1

IDE 2

FDD

1432 5

CPU

frequency

ratio select

SW1

DDR

SDRAM

DIMM 2

DDR

SDRAM

DIMM 3

JP4

Power select

USB 1for

CPU FSB

select JP7

RAID Secondary IDE

RAID Primary IDE

RAID IDE 1

Battery BIOS

Wake-On-LAN J15

J16

IrDA

Wake-On-

Ring

J19

Power select

USB 2for

JP9

Promise

20265R

J27 Chassis

fan

PWR-LED

ATX-SW

G-LED

G-SW

HD-LED

RESET

SPEAKER

2019

AGP Slot

PCI 1 Slot

PCI 2 Slot

PCI 3 Slot

PCI 4 Slot

PCI 5 Slot

USB 1

(Black)

Mouse

(Green)

(Purple)

COM 1 COM 2

Parallel

(Burgundy)

(Teal/Turquoise)

Square denotes pin 1

J29

JP10

RAID setting

DDR

SDRAM

DIMM 1

DIMM

standby

power LED

USB 2

(J20)

RAID IDE 2

ATA100/RAID select JP15

Clear CMOS (JP8)

VIA

VT8233ACD

Quick Setup Guide

Quick Setup

Guide

1.2 Ju pers

1.2.1 CPU Frequency Ratio - SW1

We do not recommend that you

adjust the CPU to a higher

frequency ratio because it may result

to the CPUs or systems instability

and are not guaranteed to provide

better system performance. If you

are unable to boot up the system

with the frequency ratio you selected,

please power off the system and set

SW1 pins 1-5 to Off (Auto).

Ratio

Auto

5.5x

6.5x

7.5x

8.5x

9.5x

10x

10.5x

11x

11.5x

12x

12.5x

Off

1432 5

CPU frequency

ratio select (SW1)

1432 5

Quick Setup Guide

Quick Setup

Guide

1.2.3 CPUs Front Side us - JP7

On: 100MHz

( 00MHz DDR) CPU

(default)

Off: 133MHz

( 66MHz DDR) CPU

To ensure proper boot up and operation of your system, you must power-

off the system then turn off the power supplys switch or unplug the AC

power cord prior to altering the setting of the jumper.

1.2.2 Clear CMOS Data - JP8

-3 On:

Clear CMOS Data

1- On:

Normal (default)

Clear CMOS

(JP8)

CPU FSB

select ( JP7)

Quick Setup Guide

Quick Setup

Guide

1.2.4 Power Select for US 1 (JP4) and

Power Select for US 2 (JP9)

-3 On:

5VSB

1- On:

5V (default)

123

JP4

JP9

123

JP4

JP9

Power select

USB1(for JP4)

Power select

USB2(

for

JP9)

123

1.2.5 RAID Settings - JP10

32 1

321

1- On:

Disable the

RAID function

-3 On:

Enable the

RAID function

(default)

321

RAID setting

(JP10)

Quick Setup Guide

Quick Setup

Guide

1.2.6 Promise IDE Controllers Function - JP15

ATA100/RAID

select (JP15)

1- On:

ATA100 IDE

-3 On:

RAID (default)

Table des matières

Autres manuels DFI Carte mère

Manuels Carte mère populaires d'autres marques

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur