Delta Modulon DPH series Manuel utilisateur

Delta UPS - Modulon Family

The power behind competitiveness

www.deltapowersolutions.com

DPH Series, Three Phase

100-300 kVA

User Manual

Modulon DPH Series

Save This Manual

This manual contains important instructions and warnings that you should follow

during the installation, operation, storage and maintenance of this product. Failure

to heed these instructions and warnings will void the warranty.

(“Manual”), including but not limited to the contents, information, and figures are solely owned

and reserved by Delta Electronics Inc. (“Delta”). The Manual can only be applied to the operation

or the use of this product. Any disposition, duplication, dissemination, reproduction, modification,

translation, extraction, or usage of this Manual in whole or in part is prohibited without the prior

written permission of Delta. Given that Delta will continuously improve and develop the product,

changes may be made to the information in this Manual at any time without obligation to notify

DQ\SHUVRQRIVXFKUHYLVLRQRUFKDQJHV'HOWDZLOOPDNHDOOSRVVLEOHHႇRUWVWRVHFXUHWKHDFFXUDF\

and the integrity of this Manual. Delta disclaims any kinds or forms of warranty, guarantee,

or undertaking, either expressly or implicitly, including but not limited to the completeness,

IDXOWOHVVQHVVDFFXUDF\QRQLQIULQJHPHQWPHUFKDQWDELOLW\RU¿WQHVVIRUDSDUWLFXODUSXUSRVHRIWKH

Manual.

Table of Contents

III

Table of Contents

1. Important Safety Instructions ---------------------------------------------- 1-1

1.1 Installation Warnings ---------------------------------------------------------------------- 1-2

1.2 Connection Warnings --------------------------------------------------------------------- 1-2

1.3 Usage Warnings --------------------------------------------------------------------------- 1-3

1.4 Storage Warnings ------------------------------------------------------------------------- 1-5

1.5 Standard Compliance -------------------------------------------------------------------- 1-5

2. Introduction ---------------------------------------------------------------------- 2-1

2.1 General Overview ------------------------------------------------------------------------- 2-2

2.2 Package Inspection ----------------------------------------------------------------------- 2-2

2.3 Functions & Features --------------------------------------------------------------------- 2-4

2.4 Exterior and Dimensions ----------------------------------------------------------------- 2-6

2.5 Front View ---------------------------------------------------------------------------------- 2-7

2.6 Internal View ------------------------------------------------------------------------------- 2-8

2.7 Rear View ---------------------------------------------------------------------------------- 2-11

2.8 Tri-color LED Indicator & Buzzer -----------------------------------------------------2-13

3. Operation Modes --------------------------------------------------------------- 3-1

3.1 Single Input --------------------------------------------------------------------------------- 3-2

3.1.1 On-Line Mode_ Single Input_ Single Unit -------------------------------- 3-2

3.1.2 Battery Mode_ Single Input_ Single Unit---------------------------------- 3-3

3.1.3 Bypass Mode_ Single Input_ Single Unit --------------------------------- 3-4

3.1.4 Manual Bypass Mode_ Single Input_ Single Unit----------------------- 3-4

3.1.5 ECO Mode_ Single Input_ Single Unit ------------------------------------- 3-6

3.1.6 Frequency Conversion Mode_ Single Input_ Single Unit ------------- 3-6

3.1.7 Green Mode_ Single Input_ Single Unit ----------------------------------- 3-7

3.1.8 Energy Recycle Mode_ Single Input_ Single Unit ---------------------- 3-8

3.1.9 On-Line Mode_ Single Input_ Parallel Units ----------------------------- 3-9

3.1.10 Battery Mode_ Single Input_ Parallel Units -----------------------------3-10

3.1.11 Bypass Mode_ Single Input_ Parallel Units ----------------------------- 3-11

Modulon DPH Series

3.1.12 Manual Bypass Mode_ Single Input_ Parallel Units ------------------3-12

3.1.13 ECO Mode_ Single Input_ Parallel Units --------------------------------3-14

3.1.14 Green Mode_ Single Input_ Parallel Units-------------------------------3-15

3.2 Dual Input -----------------------------------------------------------------------------------3-16

3.2.1 On-Line Mode_ Dual Input_ Single Unit----------------------------------3-16

3.2.2 Battery Mode_ Dual Input_ Single Unit -----------------------------------3-16

3.2.3 Bypass Mode_ Dual Input_ Single Unit ----------------------------------3-17

3.2.4 Manual Bypass Mode_ Dual Input_ Single Unit ------------------------3-18

3.2.5 ECO Mode_ Dual Input_ Single Unit --------------------------------------3-19

3.2.6 Frequency Conversion Mode_ Dual Input_ Single Unit --------------3-20

3.2.7 Green Mode_ Dual Input_ Single Unit ------------------------------------3-21

3.2.8 On-Line Mode_ Dual Input_ Parallel Units ------------------------------3-22

3.2.9 Battery Mode_ Dual Input_ Parallel Units--------------------------------3-23

3.2.10 Bypass Mode_ Dual Input_ Parallel Units -------------------------------3-24

3.2.11 Manual Bypass Mode_ Dual Input_ Parallel Units---------------------3-25

3.2.12 ECO Mode_ Dual Input_ Parallel Units -----------------------------------3-27

3.2.13 Green Mode_ Dual Input_ Parallel Units ---------------------------------3-28

3.3 Hot Standby Redundancy (Only For Dual Input & At Least Two UPSs) ----3-29

3.4 Common Battery (Only for Parallel UPSs connecting to

the Same External Battery Cabinet(s)) ---------------------------------------------3-30

4. Communication Interfaces -------------------------------------------------- 4-1

4.1 Communication Interfaces on the Front of the UPS

with Front Door Open -------------------------------------------------------------------- 4-2

4.1.1 Display Port ----------------------------------------------------------------------- 4-3

4.1.2 REPO Dry Contacts ------------------------------------------------------------ 4-4

4.1.3 External Battery Temperature Dry Contacts ------------------------------ 4-5

4.1.4 External Switch/ Breaker Status Dry Contacts -------------------------- 4-6

4.1.5 Output Dry Contacts ------------------------------------------------------------ 4-7

4.1.6 Input Dry Contacts -------------------------------------------------------------4-10

4.1.7 Parallel Communication Cards --------------------------------------------- 4-11

4.1.8 Parallel Ports --------------------------------------------------------------------4-12

4.1.9 SMART Slot ---------------------------------------------------------------------4-12

Table of Contents

4.1.10 USB Port & RS-232 Port -----------------------------------------------------4-13

4.1.11 Auxiliary Power Cards --------------------------------------------------------4-13

4.1.12 Battery Start Buttons ----------------------------------------------------------4-14

4.2 Communication Interfaces at the Rear of the Touch Panel --------------------4-14

5. Installation and Wiring ------------------------------------------------------- 5-1

5.1 Before Installation and Wiring ---------------------------------------------------------- 5-2

5.2 Installation Environment ---------------------------------------------------------------- 5-2

5.3 UPS Transportation ---------------------------------------------------------------------- 5-4

5.4 Fixing the UPS ----------------------------------------------------------------------------- 5-5

5.5 Wiring ----------------------------------------------------------------------------------------- 5-7

5.5.1 Pre-wiring Warnings ------------------------------------------------------------ 5-7

 6LQJOH,QSXW'XDO,QSXW0RGL¿FDWLRQ --------------------------------------5-10

5.5.3 Single Unit Wiring --------------------------------------------------------------5-13

5.5.4 Parallel Unit Wiring ------------------------------------------------------------5-22

5.6 External Battery Cabinet Connection Warnings ----------------------------------5-26

5.7 STS Module -------------------------------------------------------------------------------5-33

5.7.1 STS Module Installation ------------------------------------------------------5-34

5.7.2 STS Module Removal --------------------------------------------------------5-36

5.7.3 STS Module’s LED Indicator ------------------------------------------------5-38

5.8 Power Module (Optional) ---------------------------------------------------------------5-39

5.8.1 Power Module Installation ---------------------------------------------------5-40

5.8.2 Power Module Removal ------------------------------------------------------5-42

5.8.3 Power Module’s LED Indicator ---------------------------------------------5-45

6. UPS Operation------------------------------------------------------------------- 6-1

 3UH6WDUWXS3UH7XUQRႇ:DUQLQJVIRU6LQJOH8QLWDQG

Parallel Units ------------------------------------------------------------------------------ 6-2

6.2 Start-up Procedures ---------------------------------------------------------------------- 6-4

6.2.1 On-Line Mode Start-up Procedures ---------------------------------------- 6-4

6.2.2 Battery Mode Start-up Procedures ----------------------------------------- 6-8

6.2.3 Bypass Mode Start-up Procedures ----------------------------------------6-10

6.2.4 Manual Bypass Mode Start-up Procedures -----------------------------6-13

Modulon DPH Series

6.2.5 ECO Mode Start-up Procedures -------------------------------------------6-18

6.2.6 Frequency Conversion Mode Start-up Procedures--------------------6-22

6.2.7 Green Mode Start-up Procedures -----------------------------------------6-25

6.2.8 Energy Recycle Mode Start-up Procedures -----------------------------6-29

 7XUQRႇ3URFHGXUHV ---------------------------------------------------------------------6-32

 2Q/LQH0RGH7XUQRႇ3URFHGXUHV ---------------------------------------6-32

 %DWWHU\0RGH7XUQRႇ3URFHGXUHV -----------------------------------------6-34

 %\SDVV0RGH7XUQRႇ3URFHGXUHV ----------------------------------------6-36

 0DQXDO%\SDVV0RGH7XUQRႇ3URFHGXUHV ------------------------------6-37

 (&20RGH7XUQRႇ3URFHGXUHV --------------------------------------------6-37

 )UHTXHQF\&RQYHUVLRQ0RGH7XUQRႇ3URFHGXUHV --------------------6-40

 *UHHQ0RGH7XUQRႇ3URFHGXUHV ------------------------------------------6-43

 (QHUJ\5HF\FOH0RGH7XUQRႇ3URFHGXUHV -----------------------------6-46

7. LCD Display & Settings ------------------------------------------------------ 7-1

7.1 LCD Display Hierarchy ------------------------------------------------------------------- 7-2

7.2 How to Turn on the LCD ----------------------------------------------------------------- 7-3

7.3 ON/ OFF Button ---------------------------------------------------------------------------- 7-5

7.4 Introduction of Touch Panel and Function Keys ----------------------------------- 7-7

7.5 Password Entry ---------------------------------------------------------------------------7-13

7.6 Main Screen -------------------------------------------------------------------------------7-13

7.7 Main Menu ---------------------------------------------------------------------------------7-17

7.8 Power Flow, Summary, System Status & EMS -----------------------------------7-19

7.9 Check System Readings ---------------------------------------------------------------7-21

7.9.1 Main Input ------------------------------------------------------------------------7-21

7.9.1.1 Check Kilowatt-Hour ----------------------------------------------------------7-22

7.9.2 Bypass Input --------------------------------------------------------------------7-33

7.9.3 Inverter Output ------------------------------------------------------------------7-33

7.9.4 Power Module Summary -----------------------------------------------------7-34

7.9.5 UPS Output ----------------------------------------------------------------------7-34

7.9.6 Battery Status -------------------------------------------------------------------7-35

7.9.7 EMS -------------------------------------------------------------------------------7-36

Table of Contents

VII

7.9.7.1 Connecting the optional EMS 1000 (EnviroProbe) --------------------7-40

7.10 UPS Settings ------------------------------------------------------------------------------7-40

7.10.1 Bypass Setting ------------------------------------------------------------------7-40

7.10.2 Mode Setting --------------------------------------------------------------------7-41

7.10.3 Output Setting -------------------------------------------------------------------7-42

7.10.4 Battery & Charging Setting --------------------------------------------------7-44

7.10.5 Parallel Setting ------------------------------------------------------------------7-47

7.10.6 Dry Contact Setting -----------------------------------------------------------7-48

7.10.7 General Setting -----------------------------------------------------------------7-50

7.10.8 IP Setting -------------------------------------------------------------------------7-53

7.10.9 Control ----------------------------------------------------------------------------7-54

7.10.10 EMS Setting ---------------------------------------------------------------------7-55

7.11 System Maintenance --------------------------------------------------------------------7-57

7.11.1 Alarm Warning ------------------------------------------------------------------7-57

7.11.2 Historical Event -----------------------------------------------------------------7-58

7.11.3 Statistics --------------------------------------------------------------------------7-59

7.11.4 Test --------------------------------------------------------------------------------7-60

7.11.5 Clear -------------------------------------------------------------------------------7-60

7.11.6 Advanced Diagnosis ----------------------------------------------------------7-61

7.11.7 Version & S/N -------------------------------------------------------------------7-62

8. Optional Accessories --------------------------------------------------------- 8-1

9. Maintenance ---------------------------------------------------------------------- 9-1

10. Troubleshooting ---------------------------------------------------------------10-1

$SSHQGL[7HFKQLFDO6SHFL¿FDWLRQV ---------------------------------------- A1-1

Appendix 2 : Warranty -------------------------------------------------------------- A2-1

1-1

1 Important Safety Instructions

1Important Safety

Instructions

1.1 Installation Warnings

1.2 Connection Warnings

1.3 Usage Warnings

1.4 Storage Warnings

1.5 Standard Compliance

1-2

Modulon DPH Series

1.1 Installation Warnings

y This is a three-phase four-wire on-line uninterruptible power supply (hereafter referred

to as 'UPS'). It can be used for commercial and industrial applications.

y Install the UPS in a well-ventilated indoor area, away from excess moisture, heat, dust,

ÀDPPDEOHJDVRUH[SORVLYHV

y Leave adequate space around all sides of the UPS for proper ventilation and mainte-

nance. Please refer to 5.2 Installation Environment.

y Only authorized Delta engineers or service personnel can perform installation and

maintenance. If you want to install the UPS by yourself, please install it under the su-

pervision of authorized Delta engineers or service personnel

y Follow the IEC 60364-4-42 standard to install the UPS.

1.2 Connection Warnings

y Before applying electrical power to the UPS, make sure the UPS is grounded to avoid a

possible risk of current leakage.

y You can parallel at maximum eight UPS units.

y The UPS must be connected with an external battery cabinet (user-supplied, handled

DQGFRQ¿JXUHGE\'HOWDVHUYLFHSHUVRQQHO3OHDVHUHIHUWR5.6 External Battery Cabi-

net Connection Warnings for relevant information.

y The installation of protective devices is highly recommended when the UPS is connect-

ed to power sources and critical loads.

y The protective devices connecting to the UPS must be installed near the UPS and eas-

ily accessible for operation.

y Protective Devices:

1. For single input, please install (1) a protective device between the main AC source

and the UPS and (2) a protective device between the connected critical loads and

the UPS.

2. For dual input, please install (1) a protective device between the main AC source

and the UPS, (2) a protective device between the bypass source and the UPS, and (3)

a protective device between the connected critical loads and the UPS.

3. Each protective device could be a breaker or a fuse. For the protective device’s

rating current, please refer to the table below.

100kVA 150kVA 200kVA 250kVA 300kVA

200A 300A 400A 500A 630A

Autres manuels pour Modulon DPH series

Table des matières

Autres manuels Delta UPS

Delta

Delta DPS Series Manuel utilisateur

Delta

Delta UPS102N2002N0B0 Manuel utilisateur

Delta

Delta Amplon Series Manuel utilisateur

Delta

Delta Ultron DPM Series Manuel utilisateur

Delta

Delta Amplon RT Series Manuel utilisateur

Delta

Delta Amplon RT Series Manuel utilisateur

Delta

Delta Amplon RT Series Manuel utilisateur

Delta

Delta UPS V3 Manuel utilisateur

Delta

Delta Amplon UPS102N2000B035 Manuel utilisateur

Delta

Delta Amplon RX series Manuel utilisateur

Delta

Delta Ultron Series Manuel utilisateur

Delta

Delta DPH series Manuel utilisateur

Delta

Delta Modulon Series Manuel utilisateur

Delta

Delta NH Plus series Manuel utilisateur

Delta

Delta Amplon N Series Manuel utilisateur

Delta

Delta Amplon RT 5kVA Manuel utilisateur

Delta

Delta Ultron HPH Series Manuel utilisateur

Delta

Delta Ultron Series Manuel utilisateur

Delta

Delta RT Series Manuel utilisateur

Delta

Delta VX 600VA Instructions d'utilisation d'origine

Delta

Delta N-6K Manuel utilisateur

Delta

Delta Agilon VX Series Guide de l'utilisateur

Delta

Delta Ultron HPH series Manuel utilisateur

Delta

Delta Amplon Series Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur