Delta Amplon RT Series Manuel utilisateur

Delta UPS - Amplon Family

The power behind competitiveness

www.deltapowersolutions.com

RT Series, Three Phase

15/ 20 kVA

User Manual

ESC

AmplonRTSeries 1

SAVE THIS MANUAL

(“Manual”), including but not limited to the contents, information, and figures are solely owned and

reserved by Delta Electronics Inc. (“Delta”). The Manual can only be applied to the operation or the

use of this product. Any disposition, duplication, dissemination, reproduction, modification,

translation, extraction, or usage of this Manual in whole or in part is prohibited without the prior

written permission of Delta. Given that Delta will continuously improve and develop the product,

changes may be made to the information in this Manual at any time without obligation to notify any

person of such revision or changes. Delta will make all possible efforts to secure the accuracy and

the integrity of this Manual. Delta disclaims any kinds or forms of warranty, guarantee, or

undertaking, either expressly or implicitly, including but not limited to the completeness,

faultlessness, accuracy, non-infringement, merchantability or fitness for a particular purpose of the

Manual.

This manual contains important instructions and warnings that you should follow during the

installation, operation, storage and maintenance of this product. Failure to heed these

instructions and warnings will void the warranty.

2ġġġ ġġġġġġġ

Table of Contents

Chapter 1: Important Safety Instructions..................................................................p. 3

Chapter 2: Introduction.............................................................................................p. 7

Chapter 3: Operation Panel......................................................................................p. 10

Chapter 4: Rear Panel..............................................................................................p. 19

Chapter 5: Communication Interfaces......................................................................p. 21

Chapter 6: Installation...............................................................................................p. 24

Chapter 7: UPS Connection.....................................................................................p. 34

Chapter 8: External Battery Pack .............................................................................p. 57

Chapter 9: Operation................................................................................................p. 73

Chapter 10: LCD Display & Settings ........................................................................p. 79

Chapter 11: Optional Accessories.............................................................................p. 97

Chapter 12: Troubleshooting ....................................................................................p. 99

Chapter 13: Maintenance.........................................................................................p. 105

Appendix 1: Technical Specifications........................................................................p. 107

Appendix 2: Warranty...............................................................................................p. 109

AmplonRTSeries

Chapter 1 : Important Safety Instructions

1.1 Safety Instructions

Installation Warnings

zBefore installation and usage, please read this User Manual thoroughly. This helps you to

use the product correctly and safely.

zInstall the UPS in a well-ventilated area, away from excess moisture, heat, dust, flammable

gas or explosives.

zTo avoid fire accidents and electric shock, please install the UPS in an indoor area free of

conductive contaminants and the temperature and humidity must be well-controlled. For the

temperature and humidity specifications, please refer to Appendix 1: Technical

Specifications.

zFollow the IEC 60364-4-42 standard to install the UPS.

zLeave adequate space (at least 50 cm (19.7”)) at the front and rear of the UPS for proper

ventilation.

Connection Warnings

zThe UPS must be well grounded due to a possible risk of current leakage.

zIt is necessary to connect protective devices with the UPS when the UPS is connected to

power sources and critical loads.

zThe protection devices connected to the UPS must be installed near the UPS and must be

easily accessible for operation.

zIf you need to move the UPS or perform re-wiring, please turn off the AC input power and

disconnect the battery input to ensure that the UPS has been safely shut down. Otherwise,

the output end might still be energized, which might cause electric shock.

Usage Warnings

zThis is a class-A product. In a domestic environment, this product may cause radio

interference, in which case the user is required to take adequate measures.

zThe UPS can be used to power computers and associated peripheral devices, such as

monitors, modems, cartridge tape drives, external hard drives, etc.

zIt is strictly forbidden to connect the UPS with the following types of loads.

1. any regenerative loads (e.g. CNC machines and lifts)

4ġġġ ġġġġġġġ

2. any asymmetrical loads (e.g. fans with half-bridge drivers and laser printers)

zTo ensure reliable operation of the UPS and to protect the UPS from overheating, the slits

and openings in the UPS must not be blocked or covered.

zBefore usage, you must allow the UPS to adjust to room temperature for at least one hour to

avoid moisture condensing inside the UPS.

zDo not pour and splash any liquid on the UPS. Do not insert any object into the UPS’s slits

and openings. Do not put beverages on or around the UPS.

zWhen an emergency occurs, (1) press and hold the ON/ OFF button ( ) for 3 seconds, (2)

release it after you hear the beep sound, (3) use the Scrolling Up or Down button ( / )

to select ‘Yes’, and (4) press the Enter button ( ) to confirm your selection to turn off the

UPS. After that, cut off the input power to shut down the UPS completely.

zDo not use any cleaning liquid or cleaning spray to clean the UPS. Before cleaning, please

make sure that the UPS has been shut down completely, the UPS’s input power cables have

been unplugged, and the batteries have been disconnected.

zAll maintenance services must be performed by qualified service personnel.

zForbid opening or removing the cover of the UPS by yourself to avoid high voltage electric

shock.

zYou must contact qualified service personnel if either of the following events occurs:

1. Liquid is poured or splashed on the UPS.

2. The UPS does not run normally after the instructions in this User Manual are carefully

observed.

NOTE:

If you use the UPS in an area that generates or incurs dust, you should install a dust filter

(optional) in the UPS to ensure its normal product life and functions.

Battery Precautions

zKeep the batteries away from heat sources. Do not open or mutilate the batteries.

zDo not dispose of batteries in a fire. The batteries may explode.

zThe released electrolyte is harmful to skin and eyes and may be toxic.

zA battery can present a risk of electric shock and high short-circuit current.

zServicing of the batteries and battery packs must be performed or supervised by qualified

service personnel knowledgeable in the batteries, battery packs and required precautions.

Keep unauthorized personnel away from the batteries and battery packs.

AmplonRTSeries

zThe risk of electric shock and short-circuit current is possible when the batteries are

connected to the UPS. Before maintenance, disconnect all batteries to cut off the battery

power.

zFor battery replacement, use only the same number and type of batteries.

zObserve the following before replacing the batteries:

1. Remove watches, rings, or other metal objects.

2. Use tools with insulated handles.

3. Wear rubber gloves and boots.

4. Do not lay tools or metal parts on the top of batteries.

5. Disconnect the charging source prior to connecting or disconnecting the battery input

terminals.

6. Remove every battery grounding during installation and maintenance to reduce the

likelihood of electric shock. If any part of the batteries is grounded, please remove the

grounding connection.

zDo not connect the batteries in reverse; otherwise, an electric shock or fire accident might

occur.

zThe batteries might lose their power during shipment or storage. Before you use the UPS for

the first time, please fully charge the batteries until the battery percentage shown on the

UPS’s LCD is 100% ( ). If the UPS needs to be stored for an extended period of time,

please fully recharge the lead-acid batteries (for at least 24 hours) every three months.As for

li-ion batteries and other batteries, please contact your battery vendor for the information.

Regardless of battery type, please fully charge the batteries until the battery percentage

shown on the LCD is 100% ( ).

NOTE:

To charge the batteries, please connect the external battery pack to the UPS.

WARNING:

1. The risk of electric shock and short-circuit current is possible when the batteries are

still connected to the UPS even if the UPS has been disconnected from the mains. Make

sure to cut off the battery source before maintenance.

2. When the UPS is connected to an external battery pack, installation of an appropriate

protection device, such as a DC fuse or a DC breaker, is required.

6ġġġ ġġġġġġġ

1.2 Standard Compliance

zCE, UL/cUL, RCM, TISI, Energy star

zUL1778 (for UPS + EBC), IEC/EN 62040-1 (for UPS + EBC + PDB/ MBB)

zEN 62040-2 Category C2/ FCC class A

1.3 Storage

zPrior to installation

If the UPS needs to be stored prior to installation, it should be placed in a dry and well-

ventilated area. The allowable storage temperature is between -15°C (5°F) and +55°C (131°F)

and the allowable relative humidity (non-condensing) is between 5% and 95%.

zAfter usage

(1) Press and hold the ON/ OFF button ( ) for 3 seconds, (2) release it after you hear the

beep sound, (3) use the Scrolling Up or Down button ( / ) to select 'Yes', and (4) press

the Enter button ( ) to confirm your selection to turn off the UPS. Make sure the UPS is shut

down, disconnect the UPS from the utility AC power, remove all loads/ equipment from the

UPS, and store the UPS in a dry and well-ventilated area at a temperature between -15°C

(5°F) and +55°C (131°F) and at a relative humidity (non-condensing) between 5% and 95%.

If the UPS needs to be stored for an extended period of time, please recharge the idle batteries

regularly. Refer to the above section Battery Precaution for relevant information.

NOTE:

1. To charge the batteries, please connect the external battery pack to the UPS.

2.After storage and before start-up of the UPS, you must allow the UPS to adjustto room

temperature (20°C ~ 25°C (68°F ~ 77°F)) for at least one hour to avoid moisture

condensing inside the UPS.

AmplonRTSeries

Chapter 2 : Introduction

2.1 Product Description

The RT series UPS (with two available models RT-15K3P and RT-20K3P) is an advanced on-line

and double-conversion UPS which provides your sensitive equipment with reliable and consistent

sine-wave power. The UPS can be configured to support three-phase output or single-phase output

to adapt to your loads. It can be connected to personal computers, networks, servers,

telecommunication equipment and a variety of other facilities. The unit’s output power factor is up

to unity; it not only produces greater electric power efficiency at less cost but also keeps your

electronic equipment safe and able to run smoothly at all times.

The UPS does not have internal batteries and must be connected to the external battery pack(s).

See the battery options below.

1. Standard battery pack (optional) – Delta lead-acid battery pack or Delta li-ion battery pack

2. Customer-owned battery pack – lead-acid battery or others

2.2 Exterior & Dimensions

(Figure 2-1: RT-15K3P/ RT-20K3P Exterior & Dimensions)

2.3 Package List

The package contains the following items. Please check if any item is missing. If there is anything

missing, please contact the dealer immediately.

Models: UPS153R6RT2N035/ UPS203R6RT2N035/ UPS153R6RT2N0B0/ UPS203R6RT2N0B0

8ġġġ ġġġġġġġ

No. Item Q’ty

1 UPS 1 PC

2 User Manual 1 PC

3 Parallel Cable 1 PC

4 Tower Stand 1 Set

5 Terminal Kit 1 Set

6 Battery Cable*

(330mm (13”), used for connection to the

optional Delta lead-acid battery pack) 1 PC

7 Battery Cable*

(500mm (19.7”), used for connection to the

optional Delta lead-acid battery pack) 1 PC

8 Bus Bar 1 Set

9 Ear Bracket Kit 1 Set

10 USB Cable 1 PC

11 Factory Test Report 1 PC

AmplonRTSeries 9

NOTE:

1. *1The two battery cables are for connection to the UPS shipped without the battery

cables already being installed; the connection should be performed by qualified service

personnel. For details, please refer to Chapter 8.5.1.1.

2. If there is any damage or anything missing, please immediately contact the dealer from

whom you purchased the unit.

3. If the UPS needs to be returned, carefully repack the UPS and all of the accessories

using the original packing materials.

Autres manuels pour Amplon RT Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Delta UPS

Delta

Delta HPH-60K Manuel utilisateur

Delta

Delta VX Series Manuel utilisateur

Delta

Delta Ultron HPH series Manuel utilisateur

Delta

Delta Amplon UPS102N2000B035 Manuel utilisateur

Delta

Delta DPH series Manuel utilisateur

Delta

Delta Amplon UPA102R2RX2N035 Manuel utilisateur

Delta

Delta M-1K Manuel utilisateur

Delta

Delta MBB-S Instructions d'utilisation d'origine

Delta

Delta Modulon Series Manuel utilisateur

Delta

Delta Ultron DPM Series Manuel utilisateur

Delta

Delta UPS102R2000B0B1 Instructions d'utilisation d'origine

Delta

Delta EH-10K Manuel utilisateur

Delta

Delta Modulon DPH series Manuel utilisateur

Delta

Delta Ultron HPH series Manuel utilisateur

Delta

Delta Amplon Series Manuel utilisateur

Delta

Delta Ultron DPS-400K Manuel utilisateur

Delta

Delta Modulon DPH series Manuel utilisateur

Delta

Delta 1kVAS Manuel utilisateur

Delta

Delta N-6K Manuel utilisateur

Delta

Delta Ultron HPH series Manuel utilisateur

Delta

Delta Amplon RT Series Manuel utilisateur

Delta

Delta Amplon RT Series Manuel utilisateur

Delta

Delta Modulon DPH series Manuel utilisateur

Delta

Delta NH-20k Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur