DeLonghi DRAGON 4 Manuel utilisateur

De’Longhi Appliances

via Seitz, 47

31100Treviso Italia

5711010571/04.13_00

DRAGON 4 OIL FILLED RADIATOR

Instructions for use

TRD4 0820E  TRD4 1025E

Description of Appliance

INSTRUCTIONS FOR USE

Read these instructions carefully before using the appliance.

Failure to comply with these instructions can lead to injury to

persons and damage to the machine.

The manufacturer is not liable for damage deriving from the

failure to comply with the user instructions.

Symbols used in these instructions

Important warnings are identied by the symbols below.

It is important to respect the warnings.

Failure to respect the warnings could lead to electric shock,

serious injury, burns, re or damage to the appliance.

Danger!

Failure to observe the warning may result in life threatening

injury by electric shock.

Important!

Failure to observe the warning could result in injury or

damage to the appliance.

Danger of burns!!

Failure to observe the warning could result in burns or

scalds.

Please note:

This symbol indicates recommendations and important

information for the user.

Fundamental recommendations regarding safety

Dear Customer – The plug on this appliance will get ‘warm’

during use, this is perfectly normal. This product is A HIGH

POWER HEATING APPLIANCE designed to our usual high

standards but please make sure your wall sockets are in

good condition and the plug is inserted correctly to avoid any

accidental overheating. We suggest that you check the plug

ANDTHE SOCKET regularly if the heater is in prolonged use, if

you are in any doubt please consult an electrician.

SAFETY WARNINGS

Danger!

As theapplianceoperates usingelectricity, electric shocks can

not be excluded.

Therefore, follow the safety recommendations given:

- To avoidrisk of cable overheating,extension leads

must not be used in powering this appliance.

- Ifthepowercableisdamaged,itmustbereplacedbythe

manufacturer or an authorised service centre in order to

eliminate all risk. Please contact Customer Experience,

see enclosed guarantee.

- Do not use the heater in a bathroom or in the vicinity of

bathtubs, washbasins, showers or swimming pools.

Important!

The appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mentalcapabilities,orlackofexperienceandknowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety. Children should be supervised to ensure

that they do not play with the appliance.

- The heater must be positioned at least 50cm from

furniture or other objects.

- Do not use this appliance in rooms measuring less than

4m.

- Do not place items over the radiator (such as to dry

washing).

- In order toavoida hazard dueto inadvertentresettingof

the thermal cutout, this appliance must not be supplied

through an external switching device such as a timer, or

connected to a circuit that is regularly switched on and

o by the utility.

Danger of burns!!

- Do not rest the power cable on hot elements.

WARNING: In order to avoid overheating, never

under any circumstances cover the appliances

during operation, as this would lead to dangerous

overheating.

Please note:

- The appliance must not be placed immediately under a

xed power socket.

- Always use the radiator in the vertical position.

- When you turn the appliance on for the rst time,

operate it at maximum for at least two hours.

- It is normal for the appliance to make "creaking" noises

when rst turned on.

- This appliance is lled with a precise quantity of oil and

repairs requiring it to be opened must be carried out by

the manufacturer or an authorised technical assistance

centre only. In the event of oil leaks, please contact

Safety warnings

Customer Experience, see enclosed guarantee.

As with any electrical appliance, whilst the instructions

aimto cover asmany eventualities aspossible,caution and

common sense should be applied when operating your

appliance, particularly in the vicinity of young children.

Use in compliance with intended use

Use this heater only as described in this manual. All other

use is considered improper. This appliance is not suitable for

commercial use. The manufacturer is not liable for damage

deriving from improper use of the appliance. This is a

household appliance only. It is not intended to be used in:

• stakitchenareasinshops,ocesandotherworking

environments;

• farmhouses;

• byclientsin hotels,motelsandotherresidentialtype

environments;

• bedandbreakfasttypeenvironments.

Use in this manner will invalidate the manufacturers

warranty.

Disposing of the appliance

In compliance with European directive 2002/96/

EC, the appliance must not be disposed of with

household waste, but taken to an authorised

waste separation and recycling centre.

Introduction

Thank you for choosing the Dragon 4 Oil Filled Radiator. We

hope you enjoy using your new appliance.Take a few minutes

to read these instructions.This will avoid all risks and damage

to the appliance.

DESCRIPTION

(see gure on pag. 2).

The terminology below will be used repeatedly in the

following pages.

A Display

B On-standby button

C Power button

D Decrease button

E Increase button

F Timer button

G Brightness button

H Eco button

I Cord holder

L Easy wheels

USE

"Easy wheel" system

Turn the radiator upside down on a rug or a soft surface in

order to prevent damaging the paint nish.

Fully unfold the wheels by turning them outwards (Fig. 1).

Turn the radiator back to its upright position.

Location

Place the radiator on the oor beneath the coldest window in

the room or any desired location. Your heater will minimize

the eect of cold drafts. The heater must not be placed

immediately below a power outlet. Do not use this radiator

in rooms having a surface area of less than 43 square feet (4

sq.m.).

Power connection

Electrical connection

- Before plugging the radiator into the mains, check that

your supply voltage is the same as that shown on the

rating plate of the appliance.

- If using more than one radiator at a time, it is important

to ensure that the house mains is adequate to cope with

the power requirements.

- It is important to ensure that the socket is adequately

earthed.

- This appliance complies with directive 2004/108/ec on

electromagnetic compatibility.

The appliance will be set in the stand-by condition.

The display will show the symbol. Keep loose clothing

or bedding, furniture and ammable material away from

the power outlet where the heater is plugged in. After an

interruption of the power supply (power failure or appliance

unplugged) the unit always reverts to o. When the unit

is switched on by pressing the on-standby button, the

operating conditions will be the same ones previously set.

First use

The rst time the appliance is used, run it at the maximum

power for at least two hours. During this time, ventilate the

Description/Use

Fig. 1

Use

room thoroughly to eliminate the“new”smell released by the

appliance. It is completely normal for the appliance to emit

“creaking”sounds the rst time it is run.

Heating

To turn the appliance on, press the (B) button.

Press button (C) to set the required power level:

MIN ( ); MED ( ); MAX ( ).

Toselect thedesired temperature, press button+ or- (Eor D).

By pushing the + or - button once, the temperature (shown

on the display) will increase or decrease by 1°C. Keeping the

+ or - button depressed the value will increase or decrease

rapidly.

The appliance allows to set the temperature from 5° to 28°C.

Anti-freeze function

Setting the temperature to 5°C with the "-" button, the

appliance will activate the Antifreeze function. The display

will show the symbol, in this way the appliance will

turn on automatically, at the max power, only if the room

temperature falls below 5°C, to prevent freezing conditions.

If you wish to go back to the Heating function, press the "+"

button once.

Eco function

When this function is active the appliance automatically sets

the most appropriate power level to guarantee optimum

comfort while reducing energy consumption. To activate this

function press the "ECO" (H) button. The display will show

symbol.

If the selected temperature is much higher then the actual

room temperature, the appliance will start automatically and

heat the room rapidly.

The appliance will automatically select the most economical

power level (MAX-MED-MIN-OFF).

IfMAX powerlevelhasbeenselectedusingthe button,

the appliance will cycle between: MAX-MED-MIN-OFF.

If MED powerlevelhas beenselected,the appliance willcycle

between: MED-MIN-OFF.

If MIN power level has been selected, the appliance will cycle

between: MIN-OFF.

Working indicator

The symbol indicates the heating status by means of its

colors.

RED: the unit is heating at the maximum power.

YELLOW: the unit is heating at the medium power.

GREEN: the unit is heating at the minimum power.

absent: the unit is not heating.

Brightness of the display

The appliance allows two dierent brightness settings for the

display. The highest is active when any key button is pressed.

After a few seconds of keyboard inactivity, the brightness will

decrease to the operating brightness level.

This lower level can be adjusted by means of the light button

(G). Press the light button repeatedly until the desired

brightness is reached (three brightness levels available).

Key lock

In order to avoid accidental operation, you can lock the

keyboard using the keylock function.

To activate this function press buttons + and - together for

at least 3 seconds. The display shows the symbol and a

double acoustic signal will be emitted. To deactivate the

function proceed in the same way.

Timer function

This function can be activated in two dierent ways.

Delayed start: With the appliance on-standby, press the

timer button (F) .

The symbol is displayed ashing together with the hours

left before the appliance comes on.

Change the hours using the + and - buttons, then wait a few

seconds for the program to be stored.

The display will return to o and the symbols remains on.

When the programmed time has elapsed, the appliance will

come on with the previous settings.

Delayed stop: with the appliance on, press the timer button

. The symbol is displayed ashing together with the

hours left before the appliance goes on-standby. Change the

hours using the + and - buttons, then wait a few seconds for

the program to be stored.

The current settings and symbol are displayed.

Maintenance and service/Troubleshooting

At the end of the set time the appliance switches on-standby

automatically. To go back to operating without the timer,

press the timer button twice.

The timer symbol disappears from the display.

Note: the time is settable from 0.5 to 24 hours.

Changing of the temperature scale

The display can show the temperature in both °F (Fahrenheit)

and °C (Celsius). To select the desired temperature scale,

when the unit is in standby position, press and hold the "+"

and "ECO" keys for at least 10 seconds, then release.

The change of scale will be indicated by two short beeps.

Alarms

The appliance has a diagnostic system that makes it possible

to signal malfunctions.

In case of problems, the display will show an alarm message:

(Product failure)

With this alarm the appliance does not

operate. Check if the appliance is correctly

positioned. If the problem persists, contact

the nearest Customer Experience.

(High temperature)

When the product’s internal temperature

is too high, the heating power will

progressively and automatically be

reduced. The display shows for two

seconds, on and o. To remove the cause

of this alarm check that the unit is not

covered or obstructed.

Safety device

A safety device shuts the radiator down in the case of

overheating.To start the radiator up again, contact Customer

Experience. See enclosed guarantee leaet.

MAINTENANCE AND SERVICE

Before performing any operations on the appliance, always

unplug from the mains socket and leave to cool.

Wipe the radiator with a soft damp cloth without using

detergents or abrasives. If the radiator is not to be used for

a long period of time, wrap the cable around the cable tidy

and store the appliance in a dry place. This appliance has

been made to last many years without problems. In the

event of malfunction or doubt, do not try and repair on your

own. There would be the danger of re or electric shock.

Please refer to the enclosed guarantee leaet for service and

assistance details.

TROUBLESHOOTING

PROBLEM CAUSE SOLUTION

The appliance doesn't

work

- Be sure it is plugged in and that the electrical

outlet is working.

- Check for any obstruction.

- The temperature may be set too low.

- The Key lock may be activated.

- Plug into the power outlet.

- Remove the obstruction and let the

appliance cool down. If the appliance

doesn't work please contact

Customer

Experience.

- Set the temperature to a higher position.

- See the section "Key lock".

Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home,

if you are in any doubt about your supply contact your local electricity company.

The exible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity.

Should this plug not t the socket outlets in your home, it should be cut o and replaced with a suitable plug, following the

procedure outlined below.

Note: Such a plug cannot be used for any other appliance and should therefore be properly disposed of and not left where

children might nd it and plug it into a supply socket - with the obvious consequent danger.

Please note: We recommend the use of good quality plugs and wall sockets that can be switched o when the machine is

not in use.

IMPORTANT: The wires in the mains lead tted to this appliance are coloured in accordance with the following code:

GREEN AND YELLOW EARTH

BLUE NEUTRAL

BROWN LIVE

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

- The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the

letter E or by the earth symbol or coloured green or green and yellow.

- The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

- The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the

mains lead clamp on the plug. If your electricity supply point has only two pin socket outlets, or if you are in doubt, consult a

qualied electrician.

Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualied electrician and

should only be replaced with a exible cord of the same size.

After replacement of a fuse in the plug, the fuse cover must be retted. If the fuse cover is lost, the plug must not be used until

a replacement cover is obtained. The colour of the correct replacement fuse cover is that of the coloured insert in the base of

the fuse recess or elsewhere on the plug. Always state this colour when ordering a replacement fuse cover.

Only 13amp replacement fuses which are asta approved to B.S. 1362 should be tted.

This appliance conforms to the Norms EN 55014 regarding the suppression of radio interference.

Warning - this appliance must be earthed

Green and Yellow to Earth

13 amp Fuse

Brown to live

Cord Clamp

Blue to

neutral

Electrical requirements

Autres manuels pour DRAGON 4

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels DeLonghi Chauffage

DeLonghi

DeLonghi TRD40615EBK Manuel utilisateur

DeLonghi

DeLonghi HCX Series Manuel utilisateur

DeLonghi

DeLonghi TR0715 Manuel utilisateur

DeLonghi

DeLonghi TRRS0920E.G Manuel utilisateur

DeLonghi

DeLonghi PALACE 1800/2 Manuel d'installation et d'exploitation

DeLonghi

DeLonghi HVF3031 Instructions de montage

DeLonghi

DeLonghi HBP Series Manuel utilisateur

DeLonghi

DeLonghi RADIANT LPG GAS HEATER Guide rapide

DeLonghi

DeLonghi BBH200 Manuel utilisateur

DeLonghi

DeLonghi DRAGON 4 Manuel utilisateur

DeLonghi

DeLonghi TRN Manuel utilisateur

DeLonghi

DeLonghi DCH5915ER Manuel utilisateur

DeLonghi

DeLonghi Professional FDL3-i SLIM Mode d'emploi

DeLonghi

DeLonghi FAN HEATER Manuel utilisateur

DeLonghi

DeLonghi HCS Manuel utilisateur

DeLonghi

DeLonghi TRD40615EBK Manuel utilisateur

DeLonghi

DeLonghi TRRSE Series Manuel utilisateur

DeLonghi

DeLonghi TCH Series Manuel utilisateur

DeLonghi

DeLonghi Electric oil filled radiator Manuel utilisateur

DeLonghi

DeLonghi HFX65V15CA Manuel utilisateur

DeLonghi

DeLonghi HFX30 Series Manuel utilisateur

DeLonghi

DeLonghi HR715 Manuel d'instructions d'installation

DeLonghi

DeLonghi PALACE Manuel d'installation et d'exploitation

DeLonghi

DeLonghi DFH333MT Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur