Dell S5000 Series Manuel utilisateur

Dell S5000 Series Servers for SAP HANA

Installation Guide

Regulatory Model: M3S2G8, M3UX16

September 2022

Rev. A01

or its subsidiaries. Other trademarks may be trademarks of their respective owners.

WARNING: Please read carefully the safety instructions in the

Multilingual Safety Notices Guide

before you

perform the procedures described in this document.

Intended audience

This document is intended for use by administrators and operators.

Related documents

For the most recent product information, documentation, firmware updates, software fixes, and service offers, see the Dell

Technologies Support Site.

Preface

Preface 3

Contents i

Table of Contents

Chapter 1. Checking the Delivery Contents 1-1.....................................

1.1. Unpacking the Server 1-1..................................................

1.2. Identifying the Server 1-2.................................................

1.2.1. Identifying the Server Model 1-2..................................

1.2.2. Identifying Server Modules 1-2....................................

1.3. Checking Safety Labels 1-4................................................

1.3.1. Server Module Labels 1-4.........................................

1.3.2. UBox Labels 1-7..................................................

Chapter 2. Installing the Server in the Rack Cabinet 2-1...........................

2.1. Installing a S5408 Server 2-1..............................................

2.2. Installing a S5416 Server 2-8..............................................

2.2.1. Installing the Rails for the S5408 Server Assemblies 2-8...........

2.2.2. Installing the Rails for the Ubox(es) 2-14............................

2.2.3. Installing all the Chassis 2-18......................................

2.2.4. Installing the 8-Module Connecting Box 2-26........................

2.2.5. Installing the UBox Components 2-33...............................

Appendix A. Installing a Lightened Server A-1.......................................

A.1. Removing all the Components from the Compute Box A-1...................

A.2. Installing the Compute Box in the Rack Cabinet A-5.........................

A.3. Installing the Components into the Compute Box A-6.......................

Appendix B. Nuts, screws and washers B-1..........................................

Chapter 1. Checking the Delivery Contents 1-1

Chapter 1. Checking the Delivery Contents

D049 DANGER

D049:

The product must not be used in life support system or other

applications where failure could threaten injury or life, and any such

use voids the limited warranty associated to the product.

Important ATTENTION: Please read carefully the safety instructions

before you perform the procedures described in this

manual.

Multilingual Safety Notices Guide

1.1. Unpacking the Server

Important Before unpacking the server inspect the server packaging

for damage.

W020 WARNING

W020:

The server drawer must not be unpacked before it has reached the

room temperature (24 hours in the computer room).

According to the server configuration, the following items are included:

•Compute Box fully populated

•Empty Ubox(es)

•UBox components

•8-module connecting box

•Rack-mounting kits

•Screws and washers

1-2 Installation Guide

1.2. Identifying the Server

1.2.1. Identifying the Server Model

The server model is provided on the safety label on the side of the server.

Model Name Commercial Name

M3S2G8 S5408 server

M3XU16 UBox

1.2.2. Identifying Server Modules

Server modules are identified by an identification label.

The label gives the MAC address of the BMC embedded management controller.

Rear view

The label is located inside a little drawer.

Primary Label Example

Chapter 1. Checking the Delivery Contents 1-3

Secondary Label Example

Front view

A label is also available at the front, behind the bezel.

1-4 Installation Guide

1.3. Checking Safety Labels

Safety warning labels, including safety notices and graphic symbols, are visible

on the server. Check that the electrical installation in place complies with the

label details.

1.3.1. Server Module Labels

Server Identification Label

The label is located on the side of the server.

Mark Description

ACertification information

BRecycling symbol: it is mandatory to reuse and recycle

electronic and electrical equipment properly

CElectric hazard symbol: Caution! Risk of electric shock

DMultiple power sources symbol: Caution! The system has

more than one power source which must all be disconnected

before servicing to avoid shock hazard

EProtectivE conductor symbol: Caution! The system has a high

protective conductor current. The protective conductor (PE)

should be connected first to main protective earthing

terminal before connecting the line and neutral to avoid

shock hazard, and a PE connection to the main PE terminal is

essential before connecting the mains to avoid electric shock

FAltitude symbol: the system must not be operated at an

altitude higher than 2000 meters

GTropicalization symbol: the system must be operated within

the adequate limits of temperature and humidity

Autres manuels pour S5000 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Dell Serveur

Dell

Dell 8 Manuel utilisateur

Dell

Dell EMC PowerEdge R550 Manuel

Dell

Dell EMC PowerEdge R940 Manuel

Dell

Dell EMC XC Core XC450 Manuel

Dell

Dell Wyse 5470 Manuel utilisateur

Dell

Dell PowerEdge C6220 II Manuel utilisateur

Dell

Dell PowerEdge R530 Manuel utilisateur

Dell

Dell PowerEdge R415 Guide de démarrage rapide

Dell

Dell EMC VxFlex Ready Node 14G Manuel utilisateur

Dell

Dell PowerEdge 2650 Manuel utilisateur

Dell

Dell PowerEdge C1100 Manuel utilisateur

Dell

Dell External OEMR R210II Manuel utilisateur

Dell

Dell PowerEdge UPS 500T Manuel utilisateur

Dell

Dell PowerEdge 1650 Manuel utilisateur

Dell

Dell PowerEdge R330 Manuel utilisateur

Dell

Dell PowerEdge 6950 Manuel utilisateur

Dell

Dell PowerEdge T20 Manuel utilisateur

Dell

Dell DSS 1500 Manuel utilisateur

Dell

Dell PowerVault NX200 Manuel utilisateur

Dell

Dell PowerEdge 1855 Manuel utilisateur

Dell

Dell DL4300 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

Dell

Dell PowerEdge systems 6300 Manuel utilisateur

Dell

Dell PowerEdge 6600 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR635 V3 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX900 Manuel utilisateur

Asus

Asus RS700DA-E6 PS4 Manuel utilisateur