DediProg StarProg-A Manuel utilisateur
D
StarProg-A
(Compatible with StarProg-MS Programmer)
Universal Online Programmer
User Manual
Version 1.1
DediProg User Manual 10/2019
© DediProg Technology Co., Ltd 2019 All rights reserved.
StarProg-A Universal Online Programmer User Manual
www.dediprog.com 2
Table of Contents
I. INTRODUCTION.............................................................................................................. 3
II. PRODUCT INFORMATION ............................................................................................... 4
III. SYSTEM REQUIREMENT.................................................................................................. 4
IV. PRODUCT DESCRIPTIONS................................................................................................ 5
4.1 Exterior.............................................................................................................................. 5
4.2 StarProg-A Hardware Specification................................................................................... 7
4.3 Related Accessories that are included in the StarProg-A package.................................... 7
V. DEDIWARE QUICK INSTALLATION GUIDE......................................................................... 9
5.1 Software Installation ......................................................................................................... 9
5.2 Install StarProg-A............................................................................................................. 10
5.3 DediWare Setting ............................................................................................................ 10
VI. APPLICATIONS.............................................................................................................. 16
VII. STARPROG-A EXTERNAL CONTROL SIGNALS.................................................................. 20
IX. APPENDIX .................................................................................................................... 22
X. REVISION HISTORY ....................................................................................................... 23
StarProg-A Universal Online Programmer User Manual
www.dediprog.com 3
This user manual provides the descriptions of StarProg-A hardware features, applications, and
software installation guidelines.
StarProg-A is able to support online and offline programming. Online programming is for
programming the IC that is already welded on the circuit board, which programs by
connecting the corresponding cable to the test point and the debug point on the IC board that
is going to be programmed. Offline programming programs through the socket adaptor,
please contact with DediProg for further information. StarProg-A can be used on
development and production. When using it in a production, it can provide USB control,
standalone, or offline programming, as well as integrate with ATE equipment.
For more software instructions, downloads, and application notes, please visit our website.
www.dediprog.com/download
I. Introduction
USB
ICP
StarProg-A Universal Online Programmer User Manual
www.dediprog.com 4
II. Product Information
Note 1. Socket adaptor will provide Start/Busy/Pass/Fail control signals.
Note 2. Multiple programmers of the same model can be driven by 1PC.
CPU:
P4 or above
OS:
Windows 7 / 8 / 8.1 / 10
USB Port:
USB 2.0
Free Disk Space:
At least 1GB
CD ROM:
It is necessary for installing the software
*When programming large volume ICs (ex. NAND), please reserve enough space for buffering.
StarProg-ATE
StarProg-A
Supported IC Kinds
MCU/CPLD/EEPROM/SPI
NOR/SPI NAND
MCU/CPLD/EEPROM/SPI
NOR/SPI NAND
Mini USB Port
√
√
Socket Sites
X
√(directly install)
ISP/ICP Port
√
√(with dedicated adaptor)
ATE Port
√
√
Power
Supply/Pass/Busy/Error LED
Light
√
√
Start button
√
√
Off-line/Standalone
Programming
√
√
Multiple Programmers (note 2)
√
√
Dimension
135 x 75 x 20 mm
108 x 67 x 20 mm
Command line, Labview, DLL
API Support
CMD LINE & Labview
All
III. System Requirement
Programmer
Models
Functions
StarProg-A Universal Online Programmer User Manual
www.dediprog.com 5
IV. Product Descriptions
4.1 Exterior
A. Start Button
Manually trigger to start in the production mode.
B. Operation Lights
Red LED: Error; programming has failed.
Yellow LED: The programmer is operating.
Green LED: Passed; the programming has completed successfully.
C. Power Signal Light
The light indicates the programmer is powered on.
B. Operation Lights
A. Start Button
C. Power Signal Light
D. Programming Adaptor
StarProg-A Universal Online Programmer User Manual
www.dediprog.com 6
D. Programming Adaptor
It is inserting socket adaptor or specific ISP adaptor to provide the controls of IC programming
and the ATE equipment integration.
E. Power Connector
The power inputs for off-line/standalone mode. (Please use the power adaptor that DediProg
provided, 5V/1A)
F. Mini USB Connector
Mini USB connector is for connecting the computer and the programmer when using
Dediware. (Mini-B, Speed is above 15MB/s); when you are not using the power adaptor, then
the USB is also able to provide electricity.
E. Power Connector
F. Mini USB Connector
StarProg-A Universal Online Programmer User Manual
www.dediprog.com 7
4.2 StarProg-A Hardware Specification
Programming Power Output x 2
VCC: 1.2~5V/200mA.
VPP: 5V~12V/60mA.
Programming Signal Specifications x 8.
Supported Voltage: 1.2V~5V
Dual direction
Support various programming protocol
Provides ESD protection
ATE Control Signals for Integration x 4
Output: 0-3.3V Pass/Fail/Busy Signal.
Input: 0-3.3V Start Signal.
Embedded Memory: Use 2Gbit Flash (For Standalone).
4.3 Related Accessories that are included in the StarProg-A package
4.3.1 Dedicated ISP Socket Adaptor x 1
The below picture is the combination of the socket adaptor and the programmer.
StarProg-A Universal Online Programmer User Manual
www.dediprog.com 8
4.3.2 20 PIN 20-Pin ISP Split Cable (2.54mm) x 1
20-Pin ISP Split Cable (2.54mm) works with the ICP Port of the dedicated ISP socket adaptor.
4.3.3 Power Supply x 1
AC 100~240V to DC 5V/1A power supply for Starprog-A (Included in the package) x 1
4.3.4 USB Cable x 1
USB cable is for connecting the StarProg-A and the computer.
StarProg-A Universal Online Programmer User Manual
www.dediprog.com 9
The software is provided with the purchase of StarProg series programmers. The latest
version will also be available on our website. www.dediprog.com
5.1 Software Installation
1. Install DediWare software
2. After installation, Dediware icon will appear on the desktop.
V. Dediware Quick Installation Guide
StarProg-A Universal Online Programmer User Manual
www.dediprog.com 10
5.2 Install StarProg-A
1. Connect StarProg-A to a computer (Make sure the computer recognizes the programmer).
2. Install the socket adaptor. If you are using the dedicated ICP adaptor, then please use
programming cable to connect to the circuit board.
3. Start programming after the software is open.
5.3 DediWare Setting
1. Double-Click the icon to run the software.
2. Software interface (Make sure the programmer has been detected by the Dediware,
please see the below image for reference).
Table des matières
Autres manuels DediProg Carte mère
DediProg
DediProg NuProg-E2 Manuel utilisateur
DediProg
DediProg StarProg-ATE Manuel utilisateur
DediProg
DediProg SF600 Manuel utilisateur
DediProg
DediProg StarProg Series Manuel utilisateur
DediProg
DediProg NuProg-E Manuel utilisateur
DediProg
DediProg StarProg-ATE Manuel utilisateur
DediProg
DediProg NuProgPlus-U8 Manuel utilisateur
DediProg
DediProg SF600 Mode d’emploi
DediProg
DediProg NuProg-E Manuel utilisateur
DediProg
DediProg NuProg-F8 Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
