DediProg NuProg-E Manuel utilisateur

NuProg-E

Engineering UFS/eMMC

Programmer User Manual

Version 2.0

DediProg User Manual 09/2019

NuProg-E User Manual

www.dediprog.com 2

Table of Contents

I. INTRODUCTION ............................................................................................................................... 4

II. PRODUCT INFORMATION................................................................................................................. 4

III. SYSTEM REQUIREMENT ................................................................................................................... 5

IV. PRODUCT DESCRIPTIONS ................................................................................................................. 6

4.1 EXTERIOR ................................................................................................................................................. 6

4.2 INSTALL SOCKET ADAPTOR........................................................................................................................... 7

V. DEDIWARE QUICK INSTALLATION .................................................................................................... 8

5.1 SOFTWARE INSTALLATION............................................................................................................................ 8

5.2 INSTALL NUPROG-E PROGRAMMER............................................................................................................. 11

5.3 NUPROG INSTALLATION GUIDE (UFS PART).................................................................................................. 11

A. Main Menu and Functions..................................................................................................................... 12

B. LOG Window.......................................................................................................................................... 26

C. Programmer Information ...................................................................................................................... 26

D. IC Information........................................................................................................................................ 26

E. CheckSum Data...................................................................................................................................... 27

F. Batch Config Setting. ............................................................................................................................. 27

5.4 PRECAUTIONS WHEN USING NUPROG-E (FOR UFS) SOFTWARE ........................................................................ 36

5.5 NUPROG INSTALLATION GUIDE (EMMC PART).............................................................................................. 37

A. Main Menu and Functions..................................................................................................................... 38

B. LOG Window.......................................................................................................................................... 49

C. Programmer Information ...................................................................................................................... 49

D. IC Information........................................................................................................................................ 50

E. CheckSum Data...................................................................................................................................... 50

F. Batch Setting ......................................................................................................................................... 50

VI. REVISED EDITION ........................................................................................................................... 51

NuProg-E User Manual

www.dediprog.com 3

Important notice:

This document is provided as a guideline and must not be disclosed without consent of

DediProg. However, no responsibility is assumed for errors that might appear. DediProg

reserves the right to make any changes to the product and/or the specification at any

time without notice. No part of this document may be copied or reproduced in any

form or by any means without prior written consent of DediProg.

NuProg-E User Manual

www.dediprog.com 4

I. Introduction

This user manual is mainly introducing the hardware specifications, applications and the

software quick installation. NuProg-E is an engineering programmer that is innovated for

programming mass flash storage, such as UFS and eMMC. For UFS, it provides the basic

LUN and RPMB read and write as well as the settings for descriptors, attributes and flags.

As for eMMC, it supports User Area, Boot 1/2 and RPMB basic read and write; also

supports ExtCSD, GPP1~4 partition, read and write, as well as enhanced mode setting.

With the high speed USB 3.0, the NuProg-E is the finest programmer for UFS and eMMC

development. For more information, please visit our website.

www.dediprog.com/download

II. Product Information

High Speed Programming

With high speed processor, programming speed will increase greatly.

UFS Write speeds: 70~80MB/s; Read speeds: 60~75MB/s (Depends on computer

and IC performance).

Time reference: It will only take 20 seconds to write a 1GB file into a Toshiba UFS IC

Support UFS and eMMC/eMCP Settings and Programs

UFS part

Support Descriptors, Attributes, Flags settings

Support LUN configured, advance settings, and RPMB

eMMC part

Support User Area, Boot1/2 Partition and Extend CSD

Support RPMB, GPP1~4 and Enhanced mode

Support all IC package

Support standard package of UFS and eMMC (BGA153 (11.5x13mm)) or special

package of UMCP and eMCP.

Regular Software Update

Palm Size and Space Saving

Dimension: 132 x 75 x 30 mm Weight: 104g

Support USB 2.0 and USB 3.0 (Power adapter is required*)

*It is recommended to plug in the power adapter first, and then the USB cable.

NuProg-E User Manual

www.dediprog.com 5

III. System Requirement

CPU:

Intel i5 or Above

OS:

Windows 7/8/8.1/10

USB Port:

USB 2.0 and USB 3.0

Free Dish Space:

At least twice of the programming memory

CD ROM:

It is necessary for installing the software

*Since UFS and eMMC have mass volumes, please reserve enough space for buffering.

*Computer performances will affect the read and write speed of UFS, please choose a computer

that has higher CPU and better performance.

NuProg-E User Manual

www.dediprog.com 6

IV. Product Descriptions

4.1 Exterior

A. Power Signal Light

E. Power Connector

C. Programming Socket Sites

D. Start Button

B. Operation Lights

F. USB 3.0 Port

Fig. 4-1

Fig. 4-2

NuProg-E User Manual

www.dediprog.com 7

A. Power Signal Light

The light indicates the programmer is powered on.

B. Operation Lights

Red LED (Error): Error; programming has failed.

Yellow LED (Busy): The programmer is operating.

Green LED (Pass): Passed; the programming has completed successfully.

C. Programming Socket Sites

Built-in high speed connector, which is for installing socket adaptor.

D. Start Button

Not available now.

E. Power Connector

External power inputs (In order to make it more stable, please make sure the

power adapter is connected, and it is recommended to connect the power first,

and then plug in USB cable.)

F. USB 3.0 Port

For connecting programmer with the computer.

4.2 Install Socket Adaptor

Place an IC into the socket adaptor and attach the adaptor to the socket site.

Fig. 4-3

Socket Adaptor

Socket Site

NuProg-E User Manual

www.dediprog.com 8

The software is provided with the purchase of NuProg-E programmer. The newest

version will also be available on our website. www.dediprog.com

5.1 Software Installation

5.1.1 Install DediWare

V. Dediware Quick Installation

Fig. 5-1

NuProg-E User Manual

www.dediprog.com 9

5.1.2 When you install NuProg-E software for the first time, please install

the USB Driver. Otherwise, the computer will not be able to recognize the

programmer.

Fig. 5-3

Fig. 5-2

NuProg-E User Manual

www.dediprog.com 10

5.1.3 After installation, Dediware and NuProg icons will appear on the

desktop. The Dediware icon is for StarProg and ProgMaster series

programmer while the NuProg icon is for NuProg-E programming.

There is another icon called DediWare_CLI; it is the Command Line software

for StarProg Series programmers, so it does not support NuProg series.

StarProg/ProgMaster

Fig. 5-4

Fig. 5-5

NuProg-E

Autres manuels pour NuProg-E

Table des matières

Autres manuels DediProg Carte mère

DediProg

DediProg StarProg Series Manuel utilisateur

DediProg

DediProg StarProg-ATE Manuel utilisateur

DediProg

DediProg NuProg-E2 Manuel utilisateur

DediProg

DediProg SF600 Mode d’emploi

DediProg

DediProg StarProg-ATE Manuel utilisateur

DediProg

DediProg NuProg-F8 Manuel utilisateur

DediProg

DediProg SF600 Manuel utilisateur

DediProg

DediProg NuProgPlus-U8 Manuel utilisateur

DediProg

DediProg StarProg-A Manuel utilisateur

DediProg

DediProg NuProg-E Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur