DB Technologies OPERA UNICA 12 Manuel

www.dbtechnologies.com info@dbtechnologies-aeb.com

OPERA UNICA 12 cod. 20120269Q REV.1.0

Quick start user manual

Section 1

The warnings in this manual must be observed together with the "USER MANUAL Section 2".

Le avvertenze nel presente manuale devono essere osservate congiuntamente al “MANUALE D’USO Sezione2”.

Die Warnungen in diesem Handbuch müssen in Verbindung mit der "BEDIENUNGSANLEITUNG Abschnitt 2" beobachtet

werden”.

Les avertissements specifiés dans ce manuel doivent être respectés ainsi que les "CARACTERISTIQUES TECHNIQUES

Section 2"

Las advertencias del presente manual se deben tener en cuenta conjuntamente con las del “MANUAL DEL USUARIO”

Sección 2”.

A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAM GGIA B L GNA (ITALIA)

Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies-aeb.com

www.dbtechnologies.com info@dbtechnologies-aeb.com

OPERA UNICA 12 cod. 20120269Q REV.1.0

Thank you for choosing a dBTechnologies Product!

The new PERA UNICA 12 is a lightweight and versatile active speaker, designed for the use in live or installed

scenarios. It is equipped with one 1” compression driver (1.75” voice coil), and one 12” neodymium woofer (3” voice

coil). The dispersion pattern is asymmetrical on vertical axis, and it is diversified (top and bottom) on the horizontal

one. This allows a good coverage also in case of reverberant environment. The amplifier (900 W RMS) is controlled

by a powerful DSP, which use FIR filters in audio real-time processing. Eight presets are available for different

equalization settings, in stacked or wedge use. Various optional accessories are available for all configuration needs.

RDNet connections enhance the control possibilities also in complex scenarios (for example in multiple installations).

Check the site www.dbtechnologies.com for the complete user manual!

1) Unpacking

The box contains:

No. 1 PERA UNICA 12

No. 1 fuse

No. 1 Mains cable

This quick start and warranty documentation

2) Easy installation

PERA UNICA 12 is equipped with:

Tilted side (A) for monitor (wedge) positioning

Pole mount (36 mm) (B) for tripod stand

mounting

Upper and side (C) handles, which allow an

easy displacement

The dispersion pattern is asymmetrical on the vertical

axis, and the horizontal coverage varies within

position: It is wider in the lower side and narrow in the

upper one.

As shown in the following picture, the related

dispersion pattern data are:

a) vertical coverage: 85° asymmetrical (+25°/-60°)

b) horizontal coverage: 110° (85° in the upper part,

120° in the lower one)

The main admitted configurations, thanks also to

various accessories like wall bracket WB- P12, as

shown in the picture below, are:

X – on a tripod stand (the maximum admitted height

from floor and the base of loudspeaker is 1,6 m)

Y – with wall bracket in truss mounting (via aliscaff)

Z – wall mounted

W– wedge (monitor configuration on the stage)

For further information about accessories and

admitted configurations, please refer to the complete

user manual.

NEVER USE THE HANDLES T SUSPEND

THE SPEAKER!

Some installation examples:

on a 35 mm tripode stand,

Y-with wall bracket and truss

adapter for

aliscaff mounting,

-wall-mounted,

W-wedge (in monitor

configuration)

www.dbtechnologies.com info@dbtechnologies-aeb.com

OPERA UNICA 12 cod. 20120269Q REV.1.0

3) Connections and controls

All the connections and controls are in the amplifier

panel side:

1–Balanced input (XLR connector type)

2–Input sensitivity control

3–Input sensitivity type switch (MIC/LINE)

4–Balanced output Link (XLR connector type)

5–Status LEDs (Limiter-Signal-Status-ON)

6–DSP Preset rotary with reference table

7–RDNet DATA IN

8–RDNet DATA UT

9–RDNET control LEDs

10–USB Data Service

11–Auto-range Mains Input

12–Mains Link

13–Mains Fuse

a) Connect the audio input [1]. In case of dynamic

microphone, select “MIC” in input sensitivity switch [3],

otherwise select “LINE”. Adjust the Input Sensitivity

level [2].

b) If you need to send the audio signal to a second

speaker, connect the “Balanced utput” [4] to the

Input on [1] of another PERA UNICA 12 (for example)

using a cable with XLR (balanced) connector.

c) Set properly the DSP preset rotary [6], choosing

between on stand “S”, wedge “W” configurations, or

apply HPF filters “H”. The settings possibilities are:

S1– Playback, for tracks (like mp3

reproduction)

S2– Bass boost, with a low-frequencies

enhancement

S3– Vocal enhance, for an optimization in

vocal and singing performances

H1 – HPF 90 Hz Apply high-pass filter with 90

Hz cutoff frequency, for a little bass reduction

H2 – HPF 120 Hz - Apply high-pass filter with

120 Hz cutoff frequency, for a strong bass

reduction

W1– Wedge, designed for reproduction in

monitoring (wedge) use

FLAT – designed for coherent source

reproduction

d) In case of remote control, connect the proper Data

Input [7] to the hardware remote controller (RDNet

Control 2 or RDNet Control 8) with cables equipped

with etherC N connectors. Then connect the Data

utput [8] to the Data Input [7] of a second PERA

UNICA, and so on. When the RDNet network is on and

it has recognized the connected device, the LED “Link”

[9] is on. The other LED [9] “Active” start blinking when

there is the presence of data transmission, the

“Remote Preset Active” advise that all the local

controls set on the amplifier panel (level, DSP presets,

etc.) are by-passed and controlled remotely by the

software AUR RA NET. See also RDNet Control 2,

Control 8 and AUR RA NET user manuals for further

information.

e) Plug the mains Input [11] and Link [12] (powerC N)

cables. The Signal/ N led starts blinking, signaling the

presence of audio signal.

Check the complete user manual on www.dbtechnologies.com for further

information about the system and available accessories.

Scarica il manuale completo da www.dbtechnologies.com per ogni

ulteriore informazione sul sistema e sugli accessori disponibili.

Für weitere Informationen und verfügbares Zubehör lesen sie bitte die

vollständige Bedienungsanleitung unter

www.dbtechnologies.de.

Vérifiez le manuel de l'utilisateur complet sur www.dbtechnologies.com

pour des informations complémentaires du système et des accessoires

disponibles.

Compruebe el manual de usuario completo sobre

www.dbtechnologies.com para la información adicional sobre el sistema

y accesorios disponibles.

WARNING

The speaker is supplied with a mounted fuse for operation within the

220-240V~ range. If you need to operate in the 110-

120V~ voltage range

1. Disconnect all connections, including the power supply.

2. Wait for 5 minutes.

3. Replace the fuse with the one provided in the package

for the 100-120V~ range

www.dbtechnologies.com info@dbtechnologies-aeb.com

OPERA UNICA 12 cod. 20120269Q REV.1.0

Technical Data

Speaker Type: 2 way active speaker

Usable Bandwidth [ 10 dB]: 67 – 20000 Hz

Frequency Response [ 6 dB]: 73 – 20000 Hz

Max SPL (1 m): 132 dB

HF compression driver: 1 " Exit

HF voice coil: 1.75”

LF: 12” (Neodymium)

LF Voice Coil: 3”

Crossover frequency: 1600 Hz

FIR filters: yes

Horizontal dispersion: 110° (85° up / 120° down)

Vertical dispersion: 85° (+25°/ 60°)

Amplifier

Amp Technology: Digipro® G3 Auto range

Amp Class: Class D

RMS Power: 900 W

Peak Power: 1800 W

perating voltage:

220 240V~ (50 60 Hz) or 100 120V~ (50 60 Hz)

Processor

Controller: 56 bit DSP, 24 bit/48 kHz AD/DA converter

Limiter: Peak, RMS, Thermal

Controls: DSP rotary control (8 presets), Input

sensitivity switch, input sensitivity level

Input/ utput

Mains/link connections: powerCON® type

Signal Input/Link: Balanced XLR type

RDNet connections: Data in, Data out

Daisy chain power connection (max number of OPERA

UNICA 12): 6 (1+5) (220 240V~) / 3 (1+2) (100 120V~)

Mechanics

Housing: Polypropylene

Grille: Full grille

Rigging points: (2x) M10 on top + (1x) M10 on the rear

Pole Mount: yes, 36 mm diameter

Width: 350 mm (13.78 in)

Height: 642 mm (25.28 in)

Depth: 349 mm (13.74 in)

Weight: 15 kg (33.07 lbs.)

Download the complete user manual on:

www.dbtechnologies.com/EN/Downloads.aspx

EMI CLASSIFICATION

According to the standards EN 55103 this equipment is designed and suitable to operate in E3 (or lower E2, E1) Electromagnetic environments.

FCC CLASS B STATEMENT ACCORDING TO TITLE 47, PART 15, SUBPART B, §15.105

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the

equipment.

WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages to persons or properties.

For safety reasons do not place one loudspeaker on top of another without proper fastening systems. Before hanging the loudspeaker check

all the components for damages, deformations, missing or damaged parts that may compromise safety during installation. If you use the

loudspeakers outdoor avoid spots exposed to bad weather conditions.

Contact dB Technologies for accessories to be used with speakers. dBTechnologies will not accept any responsibility for damages caused by

inappropriate accessories or additional devices.

Features, specification and appearance of products are subject to change without notice.

dB echnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change

or improve products previously manufactured.

Scan with your QR Reader

App to download the

complete User Manual

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels dB Technologies Intervenants

dB Technologies

dB Technologies VIOX Series Manuel utilisateur

dB Technologies

dB Technologies Opera 208D Manuel utilisateur

dB Technologies

dB Technologies Opera D Manuel utilisateur

dB Technologies

dB Technologies sya 10 Manuel

dB Technologies

dB Technologies INGENIA IG4T Manuel utilisateur

dB Technologies

dB Technologies IS Series Manuel utilisateur

dB Technologies

dB Technologies LVX 8 Manuel utilisateur

dB Technologies

dB Technologies Sigma Series Manuel utilisateur

dB Technologies

dB Technologies DIGIPRO DVX DM28 Manuel utilisateur

dB Technologies

dB Technologies Opera Live Manuel utilisateur

dB Technologies

dB Technologies VIO X310 Manuel

dB Technologies

dB Technologies VIO X205 Manuel utilisateur

dB Technologies

dB Technologies LVX XM15 Manuel

dB Technologies

dB Technologies LVX P10 Manuel

dB Technologies

dB Technologies DVX P Series Manuel utilisateur

dB Technologies

dB Technologies L80D Manuel utilisateur

dB Technologies

dB Technologies CROMO 8+ Manuel utilisateur

dB Technologies

dB Technologies IS25T Manuel utilisateur

dB Technologies

dB Technologies Flexsys F8 Manuel utilisateur

dB Technologies

dB Technologies B-HYPE 8 Manuel

dB Technologies

dB Technologies Opera REEVO 212 Manuel

dB Technologies

dB Technologies LVX 10 Manuel utilisateur

dB Technologies

dB Technologies K5 Manuel utilisateur

dB Technologies

dB Technologies VIO X10 Manuel

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur

dB Technologies OPERA UNICA 12 Manuel

Manuels Intervenants populaires d'autres marques