dB Technologies LVX XM15 Manuel
www.dbtechnologies.com info@dbtechnologies-aeb.com
LVX XM15 Rev 1.1 cod. 420120241
COAXIAL ACTIVE STAGE MONITOR
Quick start user manual
Section 1
The warnings in this manual must e o served together with the "User Manual - Section 2".
Le avvertenze nel presente manuale devono essere osservate congiuntamente al “MANUALE D’USO - Sezione2”.
Die Warnungen in diesem Hand uch müssen in Ver indung mit der "BEDIENUNGSANLEITUNG - A schnitt 2" eo achtet
werden”.
Les avertissements specifiés dans ce manuel doivent être respectés ainsi que les "CARACTERISTIQUES TECHNIQUES -
Section 2"
A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAM GGIA B L GNA (ITALIA)
Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies-aeb.com
www.dbtechnologies.com info@dbtechnologies-aeb.com
LVX XM15 Rev 1.1 cod. 420120241
Thank you for choosing a dBTechnologies Product!
LVX XM15 is a powerful 2-way coaxial active monitor, equipped with one 1” compression driver exit (1.4” voice coil)
and one 15” woofer (2.5” voice coil). The coaxial transducers configuration guarantee an outstanding audio
definition. The powerful DIGIPR ® G3 amplifier section, capable of handling up to 600 W (RMS power), is controlled
by a DSP, which can perform a detailed customization of the output sound of the monitor. In particular, 8 DSP preset
positions are available.
Check the site www.d technologies.com for the complete user manual!
1) Unpacking
The box contains:
N°1 LVX XM15
N°1 Mains cable with Neutrik® powerC N connector
N°1 100-120 V FUSE
This quick start and warranty documentation.
2) Easy Assem ly
The speaker can be installed in 2 main modes:
For each configuration, refer to the acoustic coverage
HxV: 90x70°.
3) Lateral panels
LVX XM15 lateral panels are equipped with:
Amplifier control panel (A),
which allows all the connections and DSP
settings for different configurations.
36 mm pole mount (B),
useful for “ n stand” type of installation. In
this way LVX XM15 can be also used as a PA
system.
Handles (C),
for an easy and quick handling.
Wedge
On stand
www.dbtechnologies.com info@dbtechnologies-aeb.com
LVX XM15 Rev 1.1 cod. 420120241
4) Amplifier control panel
The DIGIPR ® G3 amplifier of LVX XM15 is controlled
by a powerful DSP. All the connections and settings are
in the amplifier control panel (A):
1 – Service data mini B-type USB port
2 – Limiter and Signal/ N leds
3 – Input sensibility switch (LINE/MIC) and level
control
4 – Combo line/mic input
5 – Mains fuse
6 – Auto-range mains (power) input
7 – Mains (power) link output
8 – Link audio output
9 – DSP preset BCD rotary switch
WARNING
The fuse is factory setted for 220-240 V operation.
If it is necessary to change the fuse to 100-120V range:
1. Disconnect the speaker from any ca le
2. Wait 5 minutes
3. Su stitute the fuse with the correct one supplied
Use only ca les with Neutrik® connectors!
5) Set up and first switch on instructions
1 – Choose the type of installation
a) Wedge: check the safe and proper position
on the stage expecially avoiding acoustic
obstacles.
b) n stand: use a 35 mm diameter pole stand
checking the safety and stability of installation.
2 – Connect your equipment
Connect the audio input (4) (remember to
select the proper “LINE”/”MIC” choice in input
sensibility switch (3)). If you need further links
connections use the mains power link (7)
and/or audio link (8). Set the audio input level
(3) to 0 dB.
3 – Select the desired DSP preset
Choose the right DSP configuration using the
rotary switch (9). You can choose:
a) FLAT, for a flat frequency response
b) W1 - V CAL, for an enhanced frequency
response, particularly suited for the singing
and spoken audio signal (in “wedge”
installation)
c) W2 – HF PASS (80 Hz), to apply a HF filter (80
Hz cutoff frequency) (in “wedge” installation)
d) W3 – HF PASS (120 Hz), to apply a HF filter
(120 Hz cutoff frequency) (in “wedge”
installation)
e) SERVICE, to update the firmware (use the
proper USB-port (1) for this operation)
f) S1 - L UDNESS, for a low-frequencies
enhancement, in case of installation on a pole
stand
g) S2 – HF B ST, for a high-frequencies
enhancement, in case of installation on a pole
stand
h) S3 – HF REDUCTI N, for a high frequencies
reduction, in case of installation on a pole
stand
4 – Switch on the monitor
Connect the power supply (6) and turn the
audio input level (3) to the desired value. Check
the correct connection and volume level of the
input audio source. The signal/ n led (2) starts
blinking at the presence of audio signal. Avoid
audio distortion conditions, potentially
signaled by the Limiter led (2).
For further information, download the complete user
manual: www.dbtechnologies.com/EN/Downloads.aspx
www.dbtechnologies.com info@dbtechnologies-aeb.com
LVX XM15 Rev 1.1 cod. 420120241
Technical Data
Speaker Type: 2-way Coaxial Active Stage Monitor
Acoustical data
Frequency Response [-6dB]: 58 – 17800 Hz
Max SPL: 128 dB
HF compression driver: 1" Exit
HF voice coil: 1.4”
Horn Coverage (HxV): 90 x 70°
Crossover frequency: 1700 Hz
LF: 15”
LF Voice Coil: 2.5”
Amplifier
Amp Technology: Digipro® G3
Amp Class: Class-D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: DSP 56 it
AD/DA Converter: 24 it / 48 kHz
Limiter: Peak, Thermal
Controls: Rotary BCD 8 positions, MIC/LINE switch
Rotary presets: 8 positions
Input
Mains connections: PowerCON In/link
Signal Input: 1x Com o IN (XLR/Jack)
Signal Out: 1 XLR link OUT
USB connector: mini USB B-type (for SERVICE DATA)
Mechanics
Housing: Plywood with lack pvc cover
Grille: Metal lack painted
Handles: 2, chassis-integrated
Pole Mount: Yes, 36 mm
Width: 635 mm (25 in)
Height: 460 mm (18,11 in)
Depth: 370 mm (14,57 in)
Weight: 22,3 kg – 49,16 l s.
Download the complete user manual on:
www.dbtechnologies.com/EN/Downloads.aspx
EMI CLASSIFICATION
According to the standards EN 55103 this equipment is designed and suitable to operate in E3 (or lower E2, E1) Electromagnetic environments.
FCC CLASS B STATEMENT ACCORDING TO TITLE 47, PART 15, SUBPART B, §15.105
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages to persons or properties.
For safety reasons do not place one loudspeaker on top of another without proper fastening systems. Before hanging the loudspeaker check
all the components for damages, deformations, missing or damaged parts that may compromise safety during installation. If you use the
loudspeakers outdoor avoid spots exposed to bad weather conditions.
Contact dB Technologies for accessories to be used with speakers. dBTechnologies will not accept any responsibility for damages caused by
inappropriate accessories or additional devices.
Features, specification and appearance of products are su ject to change without notice.
dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any o ligation to change
or improve products previously manufactured.
Scan with your QR Reader
App to download the
complete User Manual
Autres manuels pour LVX XM15
1
Autres manuels dB Technologies Intervenants
dB Technologies
dB Technologies VIO X10 Manuel
dB Technologies
dB Technologies FIFTY Series Manuel utilisateur
dB Technologies
dB Technologies VIO X205 Manuel utilisateur
dB Technologies
dB Technologies VIO X310 Manuel utilisateur
dB Technologies
dB Technologies VIO L208 Manuel
dB Technologies
dB Technologies Opera Live Manuel utilisateur
dB Technologies
dB Technologies Opera REEVO 212 Manuel
dB Technologies
dB Technologies LVX P8 Manuel
dB Technologies
dB Technologies VIO C Series Manuel utilisateur
dB Technologies
dB Technologies KL Series Manuel utilisateur
dB Technologies
dB Technologies VIO W10 Manuel utilisateur
dB Technologies
dB Technologies Flexsys F8 Manuel utilisateur
dB Technologies
dB Technologies IS25T Manuel utilisateur
dB Technologies
dB Technologies Arena 8 Manuel utilisateur
dB Technologies
dB Technologies DIGIPRO DVX DM28 Manuel utilisateur
dB Technologies
dB Technologies VIO W15T Manuel
dB Technologies
dB Technologies CROMO 8+ Manuel utilisateur
dB Technologies
dB Technologies digipro K Series Manuel utilisateur
dB Technologies
dB Technologies VIO X310 Manuel
dB Technologies
dB Technologies OPERA UNICA 12 Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur