DB Technologies IS 210L Manuel

IS210L 420120422Q REV1.0

QUICK START USER MANUAL SECTION 1

1[email protected]

The box contains:

N°1 IS210L loudspeaker

N°2 front link brackets

N°2 back link brackets

This quick start and warranty documentation

IS210L is the new dB Technologies 2-way passive

line array speaker for professional use. It is equip-

ped with one compression driver (voice coil: 2,4”,

exit: 1.4”) and two 10” neodymium woofers (2.5”

voice coil). The coverage pattern is 90° (H) x 15° (V).

The mechanical design allows an easy, accurate

and quick installation for flyable or stand use in ar-

ray configuration thanks to the included brackets.

•Impressive sound pressure

•Quick installation

•Multiple array configurations

PACKAGE CONTENTS

DESCRIPTION

MAIN FEATURES

TECHNICAL SPECIFICATIONS

DIMENSIONS

Speaker Type 2 Way Passive Loudspeaker

Protection against solid

objects and liquids (IP): 55

Frequency Response

[-6dB] 65 Hz - 17.5 kHz

Usable Bandwith [-10dB] 57 Hz - 18.7 kHz

RMS power 400 W

Rated impedance 8 Ohm

Max SPL (1 m) 133 dB (Fullrange)

Directivity (HxV) 90° x 15°

HF 1.4” exit, 2.4” v.c.

LF 2x 10”, 2.5” v.c.

Crossover Frequency 900 Hz

Signal Input Terminal barrier strip (or speakON®using

the SP-IS accessory panel)

Signal Output Terminal barrier strip (or speakON®using

the SP-IS accessory panel)

Housing Wooden box - black finished

Rigging Points Integrated mechanics

Dimensions (WxHxD) 675x310x400 mm

(26.6x12.2x17.8 in)

Weight 29.2 Kg (64.4 lbs.)

W 674mm (26.5 in)

H1 212mm (8.3 in)

H2 310mm (12.2 in)

D 400mm (15.7 in)

DRK-1

flybar for

stacked/flyable use

DRK-2

flybar for

stacked/flyable use

LP-6

bracket for

stacked/flyable use

ACCESSORIES

SP-IS

speakON® panel

The warnings in this manual must be observed together with the “User Manual - Section 2”.

IS210L 420120422Q REV1.0

QUICK START USER MANUAL SECTION 1

2[email protected]

CONNECTIONS

MECHANICAL FIXING POINT

Is 210L can be installed in array configuration, on each

side of the loudspeaker the user can find mechanical fixing

points to fasten the loudspeaker to another one or a to

DRK flybar using the included brackets. The (A) fixing poin-

ts allow front link brackets mount; the (B) fixing points al-

low back link brackets mount.

The (C) fixing points allow to fasten another speaker in ar-

ray configuration.

AUDIO

SOURCE

PARALLEL

SPEAKER

LINK

INPUT

iInstallation must be performed

complying with user’s manual

information and to related

instruction provided.

BACK LINK BRACKETSFRONT LINK BRACKETS

The front link brackets allows

to link the IS 210L to another

loudspeaker or to a DRK flybar.

Fasten the brackets to the IS

210L (A) fixing points using

the SPK holes (in case of

another loudspeaker mount) or

the DRK holes (in case of DRK

flybar mount).

The back link brackets allows

to link the IS 210L to another

loudspeaker or to a DRK flybar and

adjust the tilt angle from 1° to 15°.

Fasten the brackets to the IS 210L

(B) fixing point using the SPK hole

(in case of another loudspeaker

mount) or the DRK hole (in case of

DRK flybar mount).

PROTECTION AGAINST SOLID OBJECTS AND LIQUIDS (IP RATING)

The speakers are protected against the ingress of solid objects and liquids with a rating of IP55 as defined by

IEC 60529. Please only use cables with the specified diameters:

PG7 => 6 or 6.5mm diameter

PG9 => 7.5 or 8mm diameter

Fasten properly the cable gland using the plastic tightening nut.

WARNING!

Failure to comply with these installation prescriptions could adversely affect the declared protection ratings.

IS210L 420120422Q REV1.0

QUICK START USER MANUAL SECTION 1

3[email protected]

INSTALLATION

On each side fasten the front and back

link brackets to the loudspeaker depen-

ding on loudspeaker or DRK flybar cou-

pling.

DRK-1 FLYBAR MOUNT

Fasten the speaker to the flybar using the holes as shown;

an arrow on the flybar indicate the hole to choose for the

back link bracket fastening. Select the tilt angle from the

back link brackets holes depending on the array configura-

tion.

SPEAKER ARRAY MOUNT

Fasten the speakers using the holes as shown; select the tilt

angle from the back link brackets holes depending on the

array configuration.

DRK-2 FLYBAR MOUNT

Fasten the speaker to the flybar using the holes as shown: Afor positive angle, Bfor negative angle. An arrow on the flybar

indicate the hole to choose for the back link bracket fastening. Select the tilt angle from the back link brackets holes depen-

ding on the array configuration.

IS210L 420120422Q REV1.0

QUICK START USER MANUAL SECTION 1

4[email protected]

LP-6 BRACKETS FLOWN MOUNT

The LP-6 brackets allows to link IS 210L loudspeakers with IS 115S subwoofers in flown or stack configurations. For the flown

installation with LP-6 brackets follow this procedure:

1. First remove the IS 210L side panels and internal link brackets

2. Fasten the LP-6 brackets to the subwoofer

3. Fasten the loudspeaker to the LP-6 brackets

4. The three holes in the back of the LP-6 brackets allow to adjust the tilt angle (-7.5°, 0° or +7.5°).

For more information please refer to LP-6 user manual.

1. 2.

-7.5°

0°

+7.5°

IS210L 420120422Q REV1.0

QUICK START USER MANUAL SECTION 1

5[email protected]

LP-6 BRACKETS STACK MOUNT

For the stack installation with LP-6 brackets follow this procedure:

1. First remove the IS 210L side panels and internal link brackets

2. Fasten the LP-6 brackets to the subwoofer

3. Place the loudspeaker upside down on the subwoofer and fasten to the brackets

4. The three holes in the back of the brackets allow to adjust the tilt angle (-7.5°, 0° or +7.5°).

For more information please refer to LP-6 user manual.

1. 2.

IS210L 420120422Q REV1.0

QUICK START USER MANUAL SECTION 1

6[email protected]

CONFIGURATIONS

FLOWN

DRK-1 flybar

IS 210L

System negative

angle

DRK-2 flybar

IS 210L

System positive

angle

DRK-2 flybar

IS 210L

DRK-1 flybar

LP-4 brackets

IS 115S

LP-6 brackets

IS 210L

For further information regarding max loading and installation requirements, please refer to the accessories user manual.

IS210L 420120422Q REV1.0

QUICK START USER MANUAL SECTION 1

7[email protected]

STACKED

DRK-2 flybar

LP-4 brackets

IS 115S

IS 210L

IS 115S

LP-6 brackets

IS 210L

DRK-2 flybar

LP-4 brackets

IS 115S

DRK-1 flybar

IS 210L

For further information regarding max loading and installation

requirements, please refer to the accessories user manual.

IS210L 420120422Q REV1.0

QUICK START USER MANUAL SECTION 1

8[email protected]

A.E.B. Industriale Srl

Via Brodolini, 8

Località Crespellano

40053 VALSAMOGGIA

BOLOGNA (ITALIA)

Tel. +39 051 969870

Fax +39 051 969725

www.dbtechnologies.com

[email protected]

Scan with your

QR Reader App

to download the

complete User

Manual.

QQRRCCooddeetteexxtthttps://www.dbtechnologies.com/qrcode/001099/

DDaatteeccrreeaatteedd13-07-2022 12:09 07

DDeessccrriippttiioonnproduct name: IS210L

IDnode: 8670

IDlanguage: 267

language: English

field: manual

WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages to persons or pro-

perties. For safety reasons do not place one loudspeaker on top of another without proper fastening systems. Before hanging the loud-

speaker check all the components for damages, deformations, missing or damaged parts that may compromise safety during installation.

If you use the loudspeakers outdoor avoid spots exposed to bad weather conditions.

The external wiring connected to speaker output terminals requires installation by qualied personnel only. Once the equipment is instal-

led, prevent access to the connectors to unqualied personnel. Only use the accessories and congurations described in this manual, and

proceed in accordance with the instructions given in the manuals for the accessories. dBTechnologies will not accept any responsibility

for damages caused by inappropriate accessories or additional devices.

Installation and use of this equipment and its accessories must be performed only by “Expert personnel” according to safety standard. To

prevent hazards to people, animals and/or objects, make sure that the installation is stable and secure. Comply with the safety regulations

and laws in force in the country in which you use the product. For safe use, periodically check that all parts are in good working condition

before use. Only authorised personnel may carry out design, calculations, installation, testing and maintenance of professional own or

stacked audio systems.

Check periodically the integrity and the functionality of the accessories and the technical equipments for a safe installation. user should

never apply a load that exceeds the working load limits of any rigging components or equipment here presented. design, calculation,

installation, testing and maintanance of suspension and stack systems for audio equipment must be performed only by qualied and au-

thorized personnel. AEB Industriale s.r.l. denies any and all responsibility for improper installations, in the absence of safety requirements.

Features, specication and appearance of products are subject to change without notice.

dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to

change or improve products previously manufactured.

WARNINGS

Autres manuels pour IS 210L

Table des matières

Autres manuels dB Technologies Intervenants

dB Technologies

dB Technologies INGENIA IG2T Manuel utilisateur

dB Technologies

dB Technologies DVX HP series Manuel utilisateur

dB Technologies

dB Technologies B-Hype M Manuel utilisateur

dB Technologies

dB Technologies DVX P Series Manuel utilisateur

dB Technologies

dB Technologies CROMO 8+ Manuel utilisateur

dB Technologies

dB Technologies VIO-X206 Manuel utilisateur

dB Technologies

dB Technologies VIO X315 Manuel

dB Technologies

dB Technologies VIO X205 Manuel utilisateur

dB Technologies

dB Technologies Sigma Series Manuel utilisateur

dB Technologies

dB Technologies VIO X310 Manuel utilisateur

dB Technologies

dB Technologies IS 210L Manuel utilisateur

dB Technologies

dB Technologies B-HYPE 10 Manuel

dB Technologies

dB Technologies CROMO 8+ Manuel utilisateur

dB Technologies

dB Technologies OPERA UNICA 12 Manuel utilisateur

dB Technologies

dB Technologies Opera D Manuel utilisateur

dB Technologies

dB Technologies digipro DVA S10DP Manuel utilisateur

dB Technologies

dB Technologies LVX 8 Manuel utilisateur

dB Technologies

dB Technologies FLEXSYS F8 Manuel utilisateur

dB Technologies

dB Technologies VIO L210 Manuel utilisateur

dB Technologies

dB Technologies IS115S Manuel

dB Technologies

dB Technologies L80D Manuel utilisateur

dB Technologies

dB Technologies IS25T Manuel utilisateur

dB Technologies

dB Technologies VIO X310 Manuel

dB Technologies

dB Technologies IS26T Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur