Data Video SE-800 Guide de démarrage rapide

SE-800AV to DV

Upgrade Instructions

http://www.datavideo-tek.com

Parts needed to upgrade the SE-800AV to SE-800:

Item Description Part number Num

1SDI OUT Module 305-SDI-OUT 1

2DV OUT Module 305-DV-OUT 1

3DV IN Module B361N0-305 4

4IDE FLAT CABLE 26P(female)-26P(female) 50mm UL 07640260004 4

5SDI board rear metal plate 09310003052 1

6DV in board rear metal plate 09310003053 4

7Screws f3 * 12mmblack 09111301201 2

8Screw ISO w/spring and washer 3 * 8mm 09112300813 20

9 Hex risers 17mm 09160000171 4

10 Hex risers 20mm 09160000201 16

11 Nut f3 * 5.5mm for hex risers 09140301003 20

Step1: Open the SE-800 top cover

There are another 7 screws on the bottom case to be removed and then you can lift off

the top cover.

Step2:

There is a screw inside this hole, that

needs to be removed.

Remove all 4 screws holding

the metal braces

Step3:

Step4:

Remove two metal braces, four AV IN Modules and one NO-SDI card

Remove 10 rear panel screws

NO SDI Card x 1 AV IN Module Card x 4

Step5:

SDI Out Module Card

Description Part number

SDI OUT Module 305-SDI-OUT

DV Out Module Card

Description Part number

DV OUT Module 305-DV-OUT

Add four hex risers (17mm) onto the SDI Out Module Card with 4 (5.5mm) Nuts

Description Part number

17mm hex risers

09160000171

f3 * 5.5mm Nut

09140301003

SDI Out Module Card

Step6: Put DV Out Module Card onto SDI Out Module Card with 4 ISO 3 * 8mm

screws with the spring and washer.

Add on the SDI rear panel with two f 3 * 12mm screws

Step7: Add four hex risers (20mm) on the AV IN Module Card and fasten with Nuts

Description Part number

SDI board rear metal plate 09310003052

Screws f 3 * 12mm black 09111301201

Screws ISO 3 * 8mm with spring and washer 09112300813

AV IN Module Card

Description Part number

hex risers 20mm

09160000201

Nut f 3 * 5.5mm

09140301003

Step8: Connect the IDE FLAT CABLE on to J2 of the DV IN Module Card

(Please note: the red line on cable should match Pin 1 of J2)

Step 9: Adjust the NTSC/PAL J4 Jumper setting on DV IN Module Card

Short on 1&2 for NTSC System

Short on 2&3 for PAL System

DV IN Module Card

Description Part number

DV IN Module B361N0-305

IDE FLAT CABLE 26P 50mm UL 07640260004

Step 10: Replace the original AV IN Module Card plate with the DV module plate.

Step 11: Add four ISO 3 * 8mm screws onto the DV IN Module Card

Connect the 26-Pin FLAT CABLE from the DV to AV card

DV module rear Plate

Description Part number

DV module rear plate (6-Pin DV) 09310003053

AV IN and DV IN Module Card

Description Part number

Screw ISO 3 * 8mm with spring and washer 09112300813

Step12: Follow Step 7 to Step 11 to assemble the three remaining DV and AV

modules. Install all the modules with SDI/DV Out Module back onto the SE-800

PCI slot. (Shown below)

Step13:

Attach the metal braces to

secure the modules.

Note: The direction of the

metal brace assembly.

Note: The direction of metal

brace assembly.

Fasten all four screws

(two per side)

Autres manuels pour SE-800

Autres manuels Data Video Moniteur

Data Video

Data Video TLM-170H Manuel utilisateur

Data Video

Data Video TLM-702 Manuel utilisateur

Data Video

Data Video TLM-702HD Manuel utilisateur

Data Video

Data Video TLM-700HD Manuel utilisateur

Data Video

Data Video TLM-700HD Manuel utilisateur

Data Video

Data Video TLM-170G Manuel utilisateur

Data Video

Data Video TLM-404H Manuel utilisateur

Data Video

Data Video TLM-170G Manuel utilisateur

Data Video

Data Video TLM-102 Manuel utilisateur

Data Video

Data Video TLM-433 Manuel utilisateur

Data Video

Data Video SE-1000 Manuel

Data Video

Data Video TLM-434H Manuel utilisateur

Data Video

Data Video TLM-170FR Manuel utilisateur

Data Video

Data Video TLM-170G Manuel utilisateur

Data Video

Data Video TLM-702HD Manuel utilisateur

Data Video

Data Video TLM-700UHD Manuel utilisateur

Data Video

Data Video VSM-100 Manuel utilisateur

Data Video

Data Video TLM-170KR Manuel utilisateur

Data Video

Data Video TLM-700HD Manuel utilisateur

Data Video

Data Video TLM-170LM Manuel utilisateur

Data Video

Data Video TLM-404 Manuel

Data Video

Data Video TLM-170V Manuel utilisateur

Data Video

Data Video DAC-2 Fiche technique

Data Video

Data Video TLM 170 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation