Danfoss CF-RF Manuel utilisateur
088U0213
GB Instruction CF-RF Room Thermostat with Infrared Floor Sensor
DInstruktion CF-RF Raumthermostat mit Infrarot-Bodensensor
DK Vejledning CF-RF Rumtermostat med infrarød gulvsensor
FInstructionThermostat d’ambiance CF-RF avec Capteur au sol infrarouge
SE Bruksanvisning CF-RF rumstermostate med infraröd golvsensor
PL Instrukcja obsługi termostatu z czujnikiem podłogowym CF-RF
NL Handleiding voor CF-RF kamerthermostaat met infrarood vloersensor
IIstruzioni CF-RF con sensore a pavimento a raggi infrarossi
1VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007
GB Instruction .......................3
DInstruktion ......................13
DK Vejledning ......................25
FInstruction ......................35
SE Bruksanvisning . . . . . . . . . . . . . . . . . . 45
PL Instrukcja obsługi. . . . . . . . . . . . . . . . 55
NL Handleiding.....................65
IIstruzioni........................75
2VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007
3VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007
Instruction CF-RF Room Thermostat with Infrared Floor Sensor
GB Index
1. Functional Overview ...............................................4
2. Installation ...................................................................4
3. Temperature Settings...............................................6
4. Transmission Test ......................................................9
5. Mounting .....................................................................9
6. Uninstallation .......................................................... 10
7. Specications........................................................... 11
8. Troubleshooting...................................................... 12
9. Figures and Illustrations................................ A1-A2
GB
4VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007
Instruction CF-RF Room Thermostat with Infrared Floor Sensor
1. Functional Overview
Front - g. 1
Up/down selector
Push button
Red LED (behind the cover)
InfraRed oor sensor
LED modes
Permanent light ON
No light OFF
Slow ashing Flashes
Fast ashing Flickers
Back - g. 2
Back plate
Back plate lock/unlock (turn 90°)
Screw hole for wall mounting
Battery placement
Screw and wall plug
Note: To activate batteries please remove enclosed strips
from batteries
2. Installation
Note:
• To activate batteries in the Room Thermostat, please
remove enclosed strips from the batteries.
• The assignment of the Room Thermostats to the Master
Controller should be within 1½ m distance
5VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007
Instruction CF-RF Room Thermostat with Infrared Floor Sensor
Activate Install mode on Master Controller
- g. 1.
• Use the menu selection button to select the
Install mode. Install LED ashes
• Activate Install mode by pressing OK . Install
LED goes ON
Activate Install mode on Room Thermostat
• Press the push button . LED and icker
during communication
Select output on Master Controller
• All available output LEDs on Master Controller
light up, and the rst of them ashes
• Press output selection button , to select
desired output (ashes) and accept with OK
• All output LEDs go OFF. Selected output
stays ON shortly
Room Thermostat installation status
• Satisfactory - LED goes OFF
• Not satisfactory - LED ashes 5 times
Note: A Room Thermostat can be assigned to several
outputs if needed by repeating the installation process.
GB
6VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007
Instruction CF-RF Room Thermostat with Infrared Floor Sensor
3. Temperature Settings
Digital Display - g. 1
Set value adjustment
Minimum temperature limitation
Maximum temperature limitation
Lock icon (settings locked from Remote
Controller, CF-RC)
Transmission link icon
Low battery indicator
Alarm icon
Timer icon (time program is active from
Remote Controller, CF-RC)
Room temperature
Floor surface temperature
Changing default display temperature - g. 1.
1. The actual room temperature is shown in the
display as default
2. To change default display from actual room
temperature to actual oor surface tempera-
ture, press and hold the push button
until SET MAX is shown in the display
3. Press the button shortly and repeatedly
until or is ashing in the display
4. Press the up/down selector to select the
new default display temperature:
Room temperature
Floor surface temperature
7VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007
Instruction CF-RF Room Thermostat with Infrared Floor Sensor
Setting of room temperature
1. Make sure actual room temperature is shown
in the display
2. Press the up/down selector to set the
desired room temperature value. SET is shown
in the display
3. When releasing the up/down selector the
display returns to actual temperature
Note: The thermostat regulates the oor heating system
according to room temperature set point, within the
maximum and minimum limitations dened for the oor
surface temperature
Room temperature limitation
1. Make sure actual room temperature is shown
in the display
2. Press the push button until SET MAX is
shown in the display
3. Press the up/down selector to set the
maximum room temperature limitation
4. Press the push button shortly, SET MIN is
shown in the display
5. Press the up/down selector to set the
minimum room temperature limitation
6. Press the push button shortly and the
actual oor surface temperature is shown in
the display
GB
8VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007
Instruction CF-RF Room Thermostat with Infrared Floor Sensor
Floor surface temperature limitation
1. Ensure actual oor surface temperature is
shown in the display illustrated by
2. Press and hold the push button until SET
MAX is also shown in the display
3. Press the up/down selector to set the
maximum oor surface temperature limitation
4. Press the push button shortly, SET MIN is
also shown in the display
5. Press the up/down selector to set the mini-
mum oor surface temperature limitation
IMPORTANT!
As heat emission from the oor may vary slightly
depending on oor covering - and thereby cause
inaccurate temperature measurement - it may be
necessary to adjust the setting of max. and min.
oor surface temperatures accordingly.
! It is important always to follow recommendations
from the oor manufacturer regarding max. oor
surface temperature.
! It is recommended always to include mixing shunt
for oor heating circuits in order to ensure optimal
ow temperature. - In addition to minimised energy
consumption, correct setting of the ow tempera-
ture will eliminate the risk of excessive heat transfer
to the oor.
9VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007
Instruction CF-RF Room Thermostat with Infrared Floor Sensor
4. Transmission Test
Initiate transmission test on Room Thermostat
- g. 1
• Press the push button
• LED goes ON
Link test is satisfactory
• LED goes OFF
Link test is unsatisfactory
• LED ashes 5 times
No link connection to RoomThermostat
• Try to relocate Room Thermostat in the room
• Or install Repeater Unit (CF-RU) and locate
between Master Controller and Room
Thermostat
Note: Master Controller output LED(s) connected to the
Room thermostat, ash(es) during link test
5. Mounting
Placing the Room Thermostat - g. 3
• The Room Thermostat should be placed in
accordance with g. 3
IMPORTANT!
Wherever possible, the room thermostat should
be installed at a place where the eect of sunlight,
GB
Table des matières
Langues :
Autres manuels Danfoss Thermostat
Danfoss
Danfoss SET 3E Manuel utilisateur
Danfoss
Danfoss 140F1080 Manuel utilisateur
Danfoss
Danfoss Icon Master Manuel utilisateur
Danfoss
Danfoss RMT-230 Manuel utilisateur
Danfoss
Danfoss DEVI DEVIreg 532 Manuel utilisateur
Danfoss
Danfoss RET2001 Manuel utilisateur
Danfoss
Danfoss ECtemp Next Plus Manuel utilisateur
Danfoss
Danfoss RESD Series Manuel utilisateur
Danfoss
Danfoss RTW-RA Manuel utilisateur
Danfoss
Danfoss DEVI DEVIreg 330 Manuel utilisateur
Danfoss
Danfoss TP5000 RF Si Mode d’emploi
Danfoss
Danfoss RET2001RF Manuel utilisateur
Danfoss
Danfoss RT1 Instructions de montage
Danfoss
Danfoss REPI Series Manuel utilisateur
Danfoss
Danfoss ECL Comfort 210 Manuel utilisateur
Danfoss
Danfoss BasicPlus2 Manuel utilisateur
Danfoss
Danfoss REP24CO Manuel utilisateur
Danfoss
Danfoss TP4 Instructions de montage
Danfoss
Danfoss Link FT Manuel utilisateur
Danfoss
Danfoss ECL Comfort 310, A367 Manuel utilisateur
Manuels Thermostat populaires d'autres marques
EWELLY
EWELLY EW-181 Manuel utilisateur
Prolon
Prolon T1100 Instructions d'installation
Computherm
Computherm Q20 Manuel utilisateur
Heatmiser
Heatmiser neoStat Manuel utilisateur
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur
