Dallmeier PANOMERA S4 Mode d’emploi

Panomera® Maintenance

Important information for inspection and maintenance of Panomera® S4 and S8 systems

Like any other item of daily use, the components of a video security system are subject to natural wear and tear due to environmental

influences. Regular inspection and maintenance of Panomera® systems is therefore required to ensure error-free operation and to avoid

consequential damage. We recommend carrying out the inspection and maintenance as prescribed at least once a year during the

entire operating period.

The operator or owner of a video security system has a legally anchored duty to maintain the safety of the equipment.

This obligation includes in particular the inspection and maintenance and Panomera® systems.

If damage results from neglect of this obligation, the system operator or owner is liable.

The maintenance interval always depends on the prevailing environmental conditions and the current

conditions (storm, hail, etc.). The maintenance interval has to be determined individually on the basis of a risk analysis.

The standards and guidelines to be observed by the operator or owner of a video security system must

always be defined individually.

Strength Test

The Panomera® System system and all attached parts must be checked for mechanical strength. This serves to prevent personal injury

and damage to property caused by falling parts.

■The inspection must to be carried out at least once a year.

■The inspection must be carried out by qualified personnel.

■The inspection must be suiciently and comprehensibly documented.

■The inspection must include at least visible damage and wear, functionality, operational safety and legibility of markings.

Please note that the operator of a video system is liable for personal injury and property damage caused by falling parts.

This simplified example shows the wall mounting of a Panomera®. Check alternative mounting methods (ceiling or pole mounting) accordingly.

If necessary, observe other attached parts and check in particular:

❶the mounting of the Panomera® on the bracket.

❷the mounting of the bracket on the wall.

❸the sealing of the front glass.

❹the fastening of the earthing cable.

❺ the correct positioning of the connectors for power supply and network connection.

❻the attachment of the safety cable to the Panomera® and to the anchor point.

Defective parts must be replaced immediately.

Dallmeier electronic GmbH & Co.KG | Bahnhofstr. 16, 93047 Regensburg, Germany | +49 941 8700-0 | dallmeier.com

All trademarks identified by ® are registered trademarks of Dallmeier electronic GmbH & Co.KG.

Third-party trademarks are named for information purposes only. Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identification of third-party

trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective trademark is unprotected.

Specifications subject to change without notice. Errors and misprints excepted. Pictures may dier from the actual product.

Panomera® Maintenance

Important information for inspection and maintenance of Panomera® S4 and S8 systems

Housing Cleaning

Regular cleaning of the Panomera® housing is necessary for error-free operation. Contamination of the front glass, for example, could lead

to poor image quality. On the other hand, heavy soiling of the cooling fins could endanger heat exchange and thus fault-free long-term

operation.

Please note that regular cleaning of the housing is not only necessary for optical reasons.

First remove all foreign objects (cobwebs, leaves, etc.) from the housing, especially:

❶from the front glass.

❷between the cooling fins on the back.

❸between the ventilation holes at the back.

❹ Clean the surface of the housing soft, dry and antistatic cloth.

Do not use cleaning agents to avoid damaging the surface.

❺ Clean the front glass of the Panomera® with a silicone-free cotton cloth.

Do not use a household glass cleaner, but a special cleaner recommended by Dallmeier (Flux glass cleaner).

Avoid strong rubbing and do not allow residues of the cleaning agent to dry on the front glass.

Front Glass Check

After cleaning the housing, the front glass of the Panomera® should be checked. In addition to observing any scratches, the seal of the front

glass in particular should be checked thoroughly. Depending on the prevailing environmental conditions, the seal may be damaged by cracks

or shrinkage. As a result, penetrating moisture can lead to fogging of the glass from the inside and, in extreme cases, to damage to the optics

and electronics.

Note that a front glass with a damaged seal must be replaced immediately to avoid consequential damage.

Autres manuels pour PANOMERA S4

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels dallmeier Caméra de sécurité

dallmeier

dallmeier DF4510H Manuel

dallmeier

dallmeier DF5210HD-DN/IR Mode d’emploi

dallmeier

dallmeier DDF4820HDV-DN Instructions d'utilisation et d'entretien

dallmeier

dallmeier SDF5410HD-DN Mode d’emploi

dallmeier

dallmeier DDF5 50HDV-DN-SM Series Mode d’emploi

dallmeier

dallmeier DOMERA DDZ4010 HS/HD Series Instructions d'utilisation et d'entretien

dallmeier

dallmeier DDF4320HD-DN Manuel utilisateur

dallmeier

dallmeier DF4900HD Instructions d'utilisation et d'entretien

dallmeier

dallmeier Panomera Air Blast Kit Manuel utilisateur

dallmeier

dallmeier MDF4220HD Mode d’emploi

dallmeier

dallmeier DDZ5200HD Series Mode d’emploi

dallmeier

dallmeier PANOMERA S4 Mode d’emploi

dallmeier

dallmeier DDZ4120HD-SMDDZ4130HD-SMDDZ4220HD-SMDDZ4230HD-SM Mode d’emploi

dallmeier

dallmeier Domera DDZ3018-IM/HS Instructions d'utilisation et d'entretien

dallmeier

dallmeier CaminPIX DDF4010HDV-IM Manuel utilisateur

dallmeier

dallmeier HD-FixDome Manuel utilisateur

dallmeier

dallmeier DDF4920HDV-DN-IM Mode d’emploi

dallmeier

dallmeier DDF4620HDV-DN Manuel utilisateur

dallmeier

dallmeier MDF5400HD-DN Manuel utilisateur

dallmeier

dallmeier DDF5 00HDV-DN-IM Series Mode d’emploi

dallmeier

dallmeier Picodome DDF4220HDV Series Manuel utilisateur

dallmeier

dallmeier DDZ5200HD Series Mode d’emploi

dallmeier

dallmeier DDF4520HDV-DN Mode d’emploi

dallmeier

dallmeier DDF5(X)00HDV-DN Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur