Dallmeier Panomera Air Blast Kit Manuel utilisateur

Autres manuels dallmeier Caméra de sécurité

dallmeier

dallmeier Domera DDZ3018-IM/HS Instructions d'utilisation et d'entretien

dallmeier

dallmeier Colour Picodome DDF3000APV Instructions d'utilisation et d'entretien

dallmeier

dallmeier DDF4520HDV-DN Mode d’emploi

dallmeier

dallmeier CaminPIX DDF4010HDV-IM Manuel utilisateur

dallmeier

dallmeier DDF4820HDV-DN Instructions d'utilisation et d'entretien

dallmeier

dallmeier DDF4920HDV-DN-IM Mode d’emploi

dallmeier

dallmeier DOMERA DDZ4010 HS/HD Series Instructions d'utilisation et d'entretien

dallmeier

dallmeier MDF4220HD Mode d’emploi

dallmeier

dallmeier DF5210HD-DN/IR Mode d’emploi

dallmeier

dallmeier PANOMERA S4 Mode d’emploi

dallmeier

dallmeier DDZ4120HD-SMDDZ4130HD-SMDDZ4220HD-SMDDZ4230HD-SM Mode d’emploi

dallmeier

dallmeier DDF51 0HDV-DN Series Mode d’emploi

dallmeier

dallmeier HD-FixDome Manuel utilisateur

dallmeier

dallmeier DDF5(X)00HDV-DN Manuel utilisateur

dallmeier

dallmeier SDF5450HD-DN Manuel utilisateur

dallmeier

dallmeier CasinoCam DDF3000AV Instructions d'utilisation et d'entretien

dallmeier

dallmeier DF4910HD-DN Instructions d'utilisation et d'entretien

dallmeier

dallmeier MDF5250HD-DN Manuel utilisateur

dallmeier

dallmeier DDF4010HDV Instructions d'utilisation et d'entretien

dallmeier

dallmeier DDF4010HDV-SM Manuel utilisateur

dallmeier

dallmeier DF3000IP Instructions d'utilisation et d'entretien

dallmeier

dallmeier DDZ3022A Instructions d'utilisation et d'entretien

dallmeier

dallmeier DDF5 50HDV-DN-SM Series Mode d’emploi

dallmeier

dallmeier DF3000A-DN Instructions d'utilisation et d'entretien

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

Panomera® S4/8

Installation of an Panomera® Air Blast Kit on a Panomera® S4/8

© 2021 Dallmeier electronic V1.2.0 2021-01-14 1/6

Preparation Panomera® S4/8

Push down the locking pin of the locking ring.

Remove the locking ring.

Loosen the screws of the Mountera® Plug.

Panomera® S4/8

Installation of an Panomera® Air Blast Kit on a Panomera® S4/8

© 2021 Dallmeier electronic V1.2.0 2021-01-14 2/6

Remove the Mountera® Plug.

Loosen the screw of the cover system

on the back of the housing.

Pull the cover system back and press

the guide rails together.

Panomera® S4/8

Installation of an Panomera® Air Blast Kit on a Panomera® S4/8

© 2021 Dallmeier electronic V1.2.0 2021-01-14 3/6

Remove the cover system from the housing.

Loosen and remove the screws of the

housing cover.

Lift o the housing cover.

Panomera® S4/8

Installation of an Panomera® Air Blast Kit on a Panomera® S4/8

© 2021 Dallmeier electronic V1.2.0 2021-01-14 4/6

Remove the three sealing rubbers.

Insert the two air pressure valves at the

connection points and tighten them.

Insert the coupling valve and tighten it.

ATTENTION:

Place and tighten vertically to avoid

damage to the thread.

Panomera® S4/8

Installation of an Panomera® Air Blast Kit on a Panomera® S4/8

© 2021 Dallmeier electronic V1.2.0 2021-01-14 5/6

Insert both air hoses firmly into the

valve openings.

ATTENTION:

Test the connection with a light pull. If the

connections are too lightly inserted, air may

escape into the housing.

Place the sealing ring on the screw of the

compressed air coupling.

ATTENTION:

The rubber nose of the sealing ring

should rest on the two cable valves.

Put the camera cover back on the camera

and tighten the screws.

Panomera® S4/8

Installation of an Panomera® Air Blast Kit on a Panomera® S4/8

© 2021 Dallmeier electronic V1.2.0 2021-01-14 6/6

Put the Mountera® Plug back in place

and tighten the screws with a Torque

wrench fixed to 14.4 Nm.

Reinsert the locking ring and

let it snap into place.

Mount the cover system on the

housing and tighten the screw.

Insert and tighten the air coupling valve

for the air hose to the compressor.

NOTE:

Select the angle valve or vertical valve that

you want to use on site for the connection.

Alternative: