Daikin BRC52B61 Manuel utilisateur
SWING
SENSE
TIMER
LED
CANCEL CLOCK CANCEL
OFF
ECO+
ON
ON/OFF
SLEEP
TEMP
MODE
FAN
POWERFUL
QUIET
OPERATING
MANUAL
English
Operating Manual
Handset Wireless
OM-BRC52B-1114(2)-DAIKIN
Part No.: R08019041652B
1-OM-BRC52B-1114(1)-DAIKIN-EN.in1 11-OM-BRC52B-1114(1)-DAIKIN-EN.in1 1 5/26/15 3:09:43 PM5/26/15 3:09:43 PM
1-OM-BRC52B-1114(1)-DAIKIN-EN.in2 21-OM-BRC52B-1114(1)-DAIKIN-EN.in2 2 5/26/15 3:09:43 PM5/26/15 3:09:43 PM
BRC52B61/62/63/64/65 Remote Control Indication
i
SWING
SENSE
TIMER
LED
CANCEL CLOCK CANCEL
OFF
ECO+
ON
ON/OFF
SLEEP
TEMP
1
2
13
6
12
5
14
8
10
3
7
4
9
16
15
11
MODE
FAN
POWERFUL
QUIET
1-OM-BRC52B-1114(1)-DAIKIN-EN.in3 31-OM-BRC52B-1114(1)-DAIKIN-EN.in3 3 5/26/15 3:09:43 PM5/26/15 3:09:43 PM
ii
HOW TO MOUNT ONTO THE WALL
TO INSERT BATTERIES (AAA.R03)
SWING
SENSE
TIMER
LED
CANCEL CLOCK CANCEL
OFF
ECO+
ON
ON/OFF
SLEEP
TEMP
SWING
SENSE
TIMER
LED
CANCEL CLOCK CANCEL
OFF
ECO+
ON
ON/OFF
SLEEP
TEMP
MODE
FAN
POWERFUL
QUIET MODE
FAN
POWERFUL
QUIET
1-OM-BRC52B-1114(1)-DAIKIN-EN.in4 41-OM-BRC52B-1114(1)-DAIKIN-EN.in4 4 5/26/15 3:09:43 PM5/26/15 3:09:43 PM
REMOTE CONTROLLER LOSS PREVENTION WITH BALL CHAIN
(OPTIONAL)
Remote controller
Screw
Wall attachment screw
Holder
Support
Ball chain (350mm)
iii
Installation
1. Match the ring at the end of the ball chain with the screw hole on the back of the remote
controller and secure it with the screw.
2. Attach the holder and the ball chain as above at the position where signals from the
remote controller can be received easily.
3. Pass the ball chain through the back of the holder and match the ring at the end of the
ball chain to the upper hole of the holder. Fix the holder to the wall by putting through
2 screws across it.
1-OM-BRC52B-1114(1)-DAIKIN-EN.in5 51-OM-BRC52B-1114(1)-DAIKIN-EN.in5 5 5/26/15 3:09:43 PM5/26/15 3:09:43 PM
iv
1-OM-BRC52B-1114(1)-DAIKIN-EN.in6 61-OM-BRC52B-1114(1)-DAIKIN-EN.in6 6 5/26/15 3:09:43 PM5/26/15 3:09:43 PM
ENGLISH
1
OPERATING GUIDE
1. Transmission source
• The source where the signal will be transmitted.
2. Signal transmission indication
• Blink to confirm that the last setting has been transmitted to the unit.
3. “ON/OFF” Button
• Press once to start the air conditioner unit.
• Press again to stop the unit.
4. Fan speed selection
• Pressing the
button continuously will toggle the fan speed in the following
order:
Low Med High Auto
• Stop pressing when the desired fan speed appears on the display screen.
5. Operation mode
• Press the MODE button to select the type of operating mode.
• For cooling only unit, the available modes are: COOL ( ), DRY ( )and
FAN ( ).
• For heat pump unit, the available modes are: AUTO ( ), COOL ( ),
DRY ( ), FAN ( ) and HEAT ( ).
• The AUTO ( ) mode is unavailable for chilled water system except
4-pipe system.
6. Automatic air swing
• Press the SWING button to activate the automatic air swing function.
• To distribute the air to a specific direction, press the SWING button and wait
until the louver move to the desired direction and press the button once again.
Swing mode selection method (model dependent)
• Press SWING ( )button for 4 seconds to enter field setting mode. While in field
setting mode, it will only show SWING MODE ( ).
• Press temperature and button to select SWING MODE ( )rotation from
Swing Mode 1 to Swing Mode 3.
• There are 3 different SWING MODE, which are:
Swing mode 1 Swing mode 2 Swing mode 3
SWING MODE will not activate unless SWING is activated.
Swing is indicated by the logo:
• If no mode changes within 4 seconds, unit will operate according to the selected
SWING MODE ( ).
Original Instruction
1-OM-BRC52B-1114(1)-DAIKIN-EN.inSec1:1 Sec1:11-OM-BRC52B-1114(1)-DAIKIN-EN.inSec1:1 Sec1:1 5/26/15 3:09:44 PM5/26/15 3:09:44 PM
2
+2 C
+1 C
- 1 C
- 2 C
0 0.5 1 1.5 2
- 3 C
7. Powerful & Powerful+ function
• Press for fast cooling or heating operation.
• Fan speed turn to maximum speed.
• Press again for smart cooling or heating operation.
• Fan speed turn to maximum speed and louver will be adjusted as according to the
judgement of sense function.
• Press again to deactivate the function.
• Available under HEAT and COOL modes only.
• Any change of fan speed will deactivate this function.
8. OFF timer setting
• Press the OFF TIMER button will activate the off timer function.
• Set the desired off time by pressing the OFF TIMER button continuously.
• Press the CANCEL button to cancel the off timer setting.
9. Quiet function (model dependent)
• Press
for quiet operation.
• Fan speed turn to minimum speed.
• Press again to deactivate the function.
• Available under HEAT and COOL modes only.
• Any change of fan speed will deactivate this function.
10. Clock time setting
• Press and hold CLOCK button to set the clock time.
11. ON timer setting
• Press the ON TIMER button will activate the on timer function.
• Set the desired on time by pressing the ON TIMER button continuously. If the
timer is set to 7.30am, the air conditioner will turn on at 7.30am sharp.
• Press the CANCEL button to cancel the on timer setting.
12. Sleep mode setting
• Press the
button will activate the sleep mode function.
• This is an energy saving option. When the unit is operating under cooling mode,
the set temperature is increased by 0.5°C after
the first half an hour, another 0.5°C after the
second half an hour and 1°C after the following
1 hour.
• When the unit is operating under heating
mode, the set temperature is decreased by
1°C after the first half an hour, another 1°C
after the second half an hour and 1°C after the
following 1 hour.
• This function is available under COOL,
HEAT and AUTO mode.
1-OM-BRC52B-1114(1)-DAIKIN-EN.inSec1:2 Sec1:21-OM-BRC52B-1114(1)-DAIKIN-EN.inSec1:2 Sec1:2 5/26/15 3:09:44 PM5/26/15 3:09:44 PM
ENGLISH
3
13. Temperature setting
• To set the desired room temperature, press the or button to increase or decrease
the set temperature.
• The temperature setting range is from 16°C to 30°C (Optional setting 20°C to
30°C).
• Press both buttons and simultaneously to toggle from °C to °F setting.
14. ECO+ function (Model dependent)
• Press
for eco-friendly mode cooling or heating operation.
• Set temperature automatically adjust to eco-friendly level.
• Press again to deactivate the function.
• Available under HEAT and COOL modes only.
15. LED function
• Press
to turn on/off the light on ceiling cassette unit.
• Continuosly press for 5 seconds to turn on/off the LED display on wall mounted
unit.
• Available under HEAT, COOL, DRY, FAN and AUTO mode.
16. Sense function (Model dependent)
• Press for intelligent eco cooling, heating or dry mode operation.
• Press again to deactivate the function.
• Available under HEAT, COOL and DRY mode.
1-OM-BRC52B-1114(1)-DAIKIN-EN.inSec1:3 Sec1:31-OM-BRC52B-1114(1)-DAIKIN-EN.inSec1:3 Sec1:3 5/26/15 3:09:44 PM5/26/15 3:09:44 PM
4
FAULT DIAGNOSIS BY REMOTE CONTROLLER
The temperature display sections indicate corresponding codes.
When the ON TIMER CANCEL button or OFF TIMER CANCEL button is held down for 5
seconds, a “ ” indication flashes on the temperature display section.
Press the ON TIMER CANCEL button or OFF TIMER CANCEL button repeatedly until a
continuous beep is produced.
The code indication changes as shown below, and notifies with a long beep.
1.
2.
•
SWING
SENSE
TIMER
LED
CANCEL CLOCK CANCEL
OFF
ECO+
ON
ON/OFF
MODE
FAN
SLEEP
POWERFUL
TEMP
QUIET
FAULT DIAGNOSIS (For Inverter only)
ON TIMER CANCEL
OFF TIMER CANCEL
ERROR CODE MEANING
00 NORMAL
A1 INDOOR PCB ERROR
A3 DRAIN PUMP ABNORMAL
A5 ANTIFREEZE (COOLING)/HEAT EXCHANGER OVERHEAT (HEATING)
A6 INDOOR FAN MOTOR ABNORMAL
AH ELECTRICAL AIR CLEANER ABNORMAL
C4 INDOOR HEAT EXCHANGER (1) THERMISTOR SHORT/OPEN
C5 INDOOR HEAT EXCHANGER (2) THERMISTOR SHORT/OPEN
C7 LOUVER LIMIT SWITCH ERROR
C9 INDOOR ROOM THERMISTOR SHORT/OPEN
E1 OUTDOOR PCB ERROR
E3 HIGH PRESSURE PROTECTION
E4 LOW PRESSURE PROTECTION
E5 COMPRESSOR MOTOR LOCK/COMPRESSOR OVERLOADED
E6 COMPRESSOR START-UP ERROR
E7 OUTDOOR DC FAN MOTOR LOCK
E8 AC INPUT OVER CURRENT
E9 EXV ERROR
EA 4 WAY VALVE ERROR
F3 DISCHARGE PIPE OVERHEAT
F6 HEAT EXCHANGER OVERHEAT
HO COMPRESSOR SENSOR SYSTEM ERROR
H3 HIGH PRESSURE SWITCH ERROR
H6 COMPRESSOR FEEDBACK DETECTION ERROR
H7 FAN MOTOR OVERLOADED/OVERCURRENT/SENSOR ABNORMAL
H8 AC CURRENT SENSOR ERROR
1-OM-BRC52B-1114(1)-DAIKIN-EN.inSec1:4 Sec1:41-OM-BRC52B-1114(1)-DAIKIN-EN.inSec1:4 Sec1:4 5/26/15 3:09:45 PM5/26/15 3:09:45 PM
Autres manuels pour BRC52B61
2
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Daikin Télécommande
Daikin
Daikin SRC-COA Manuel utilisateur
Daikin
Daikin BRC1H51W Manuel utilisateur
Daikin
Daikin BRC1D528 Manuel utilisateur
Daikin
Daikin BRC2E52C7 Manuel utilisateur
Daikin
Daikin FTY45E Manuel utilisateur
Daikin
Daikin BRC7E530W Manuel utilisateur
Daikin
Daikin BRC1H63W Manuel utilisateur
Daikin
Daikin BRC944A2B Manuel utilisateur
Daikin
Daikin Madoka Manuel utilisateur
Daikin
Daikin BRC1H81S7 Manuel d'installation et d'exploitation
Daikin
Daikin BRC1E61 Mode d’emploi
Daikin
Daikin BRC1E53 Comment utiliser
Daikin
Daikin BRC1C71 Guide des dimensions
Daikin
Daikin BRC2E61 Manuel utilisateur
Daikin
Daikin BRC1E52A7 Manuel utilisateur
Daikin
Daikin BRC7E61W Manuel utilisateur
Daikin
Daikin GS02 Manuel utilisateur
Daikin
Daikin BRC1E71 Manuel utilisateur
Daikin
Daikin Madoka Simplified Manuel utilisateur
Daikin
Daikin ARC412A6 Manuel utilisateur
Manuels Télécommande populaires d'autres marques
Panasonic
Panasonic EUR7622KB0 Manuel utilisateur
Bang & Olufsen
Bang & Olufsen Beo4 Manuel utilisateur
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur
Multiplex
Multiplex PROFI TX 9 Manuel utilisateur
One Remote
One Remote RMB4 Manuel utilisateur
FUTABA
FUTABA 9ZAP - PART2 Manuel utilisateur
