Daikin ALTHERMA Manuel utilisateur

Altherma remote controller clock and schedule

timer instructions and override functions

1. Heating on/off 6. Time adjust 11. Schedule timer action

2. Heating / Cooling switch 7. Schedule timer on/off 12. Day display

3. Hot water on/off 8. Weather compensation on/off 13. Time display

4. Hot water storage temp adjust 9. Quiet mode on/off 14. Operation mode

5. Heating water temp adjust 10. Programming button 15. Target water temperature

0C - 0M - 71Y - 0K

6C - 0M - 0Y - 61K 34C - 11M - 0Y - 0K

20C - 97M - 41Y - 6K

12 13 14

7654

1777Altherma_artwork.indd 1 23/4/08 12:14:52

Setting the clock

Push and hold the until the clock starts to ﬂash.

Adjust the time via the

Adjust the day via the

To save the changes push

Setting the schedule timers

Note: If a remote thermostat is connected will appear in the top right

of the display. If a remote thermostat is connected then it will control the on/off

function, however the schedule timer for heating can still be used to adjust water

temperatures.

There are 2 types of timer, 1) space heating which is a 7 day timer and

2) all others hot water , silent & booster heater , all of which

are 24 hour timers. Within all the timers you can program upto 5 daily actions.

The action could be on, off or in the heating timer changing a water ﬂow temperature.

Hint: When programming the schedule timers is used to advance through the

menu, is used to go back a step.

To enter the schedule timer function, press

You are now in the schedule timer selection where you chose from space

heating, domestic hot water, silent & booster heater timers, scroll through

using :

space heating

domestic hot water

booster heater in the hot water cylinder

silent operation

To enter any of these schedule timers press

1777Altherma_artwork.indd 2 23/4/08 12:14:52

1) 7 day timer

Once you have entered the mode as described, “MON” will begin to ﬂash.

Select the day you want to program via , once selected

press to enter. You can scroll through any programmed actions via

. To adjust the actions of the schedule timer push and

hold until the display begins to ﬂash, adjust the action time via

, toggle between space heating, weather dependant

function and off via and adjust the water temperature via

. To enter the changes press , this will advance to the

next action. Repeat the last step until all required actions are programmed,

then press and hold until “setting” appears to save the changes.

Shortcut: If you want to copy the entire day you’ve just programmed to the next

day push so the day of the week is now ﬂashing, select the day you want to

copy via , then to copy press & hold & at the

same time until the “setting” symbol ﬂashes. To repeat the copy day function simply

push and hold & as before.

Once you’ve ﬁnished press to go back through the screen levels until you

are back to the normal screen.

2) 24 hour timers

Once you have entered the mode as described, the time of the 1st action will appear,

you can scroll through any programmed actions via ,

to adjust the action push and hold until the display begins to ﬂash. You can now

adjust the action time via & toggle between on/off

via . To enter the changes press , it will then advance to the next

action. Repeat the last step until all required actions are programmed, then press

and hold until “setting” appears to save the changes.

Once you’ve ﬁnished press to go back through the screen levels until you

are back to the normal screen.

1777Altherma_artwork.indd 3 23/4/08 12:14:52

Printed in the UK on paper that is 50% recycled and 50% from sustainable sources.

www.altherma.co.uk

For full user instructions, please refer to the Altherma operation manual.

Activating timer function

To activate the schedule time press and will appear on the display.

To deactivate the schedule timer press and will disappear.

Useful information

If there no external thermostat connected the controller works on a last command

basis i.e. if you change the water temperature for the space heating or turn the

system on then this will stay the same unless there is a action programmed in the

schedule timer such as a water temperature change or off function.

Hot water boost

A hot water boost mode is available for rapid water heating.

If activated this will override any settings and switch the heat pump to hot water

heating & also switch the booster heater on.

To activate press & hold until you see & symbols appear.

The boost function will then run until either deactivated, by pressing or until

the set water storage temperature has been achieved.

Note: Increased use of the Boost function will effect the overall efﬁciency of

the system.

1777Altherma_artwork.indd 4 23/4/08 12:14:52

Autres manuels pour ALTHERMA

Table des matières

Autres manuels Daikin Télécommande

Daikin

Daikin BRC1E71 Manuel utilisateur

Daikin

Daikin BRC1H63K Manuel utilisateur

Daikin

Daikin Madoka BRC1H82K Guide de l'utilisateur

Daikin

Daikin BRC1E52B7 Manuel utilisateur

Daikin

Daikin BRC1E52A7 Manuel utilisateur

Daikin

Daikin BRC1H63W Manuel utilisateur

Daikin

Daikin OM-GS02-0112 Manuel utilisateur

Daikin

Daikin BRC7E61W Manuel d'installation

Daikin

Daikin BRC7C812 Manuel utilisateur

Daikin

Daikin BRC7E530W7 Manuel utilisateur

Daikin

Daikin BRC1E52A7 Manuel utilisateur

Daikin

Daikin BRC1H82W Manuel utilisateur

Daikin

Daikin BRC1D527 Manuel utilisateur

Daikin

Daikin BRC301B61 Manuel utilisateur

Daikin

Daikin BRC1H81S7 Manuel d'installation et d'exploitation

Daikin

Daikin BRC1H519K Guide de l'utilisateur

Daikin

Daikin ARC417A14 Manuel utilisateur

Daikin

Daikin BRC7EA631 Manuel utilisateur

Daikin

Daikin ARC433A51 Manuel d'instructions

Daikin

Daikin BRC1H519W Manuel utilisateur

Daikin

Daikin MicroTech II Manuel utilisateur

Daikin

Daikin DCS303A51 Manuel utilisateur

Daikin

Daikin BRC1H71W Manuel du système

Daikin

Daikin BRC230Z4 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation