D-Link DAP-1360 Manuel utilisateur
Quick Installation Guide
DAP-1360
Wireless N 300 Access Point & Router
DAP-1360 Quick Installation Guide
BEFORE YOU BEGI
Delivery Package
•Access point DAP-1360
•Power adapter DC 12V
•Ethernet cable (CAT 5E
•“Quick Installation Guide” (brochure .
If any of the items are missing, please contact your reseller.
The “User Manual” and “Quick Installation Guide” documents in Russian
and English are available on D-Link website (see
ftp.dlink.ru/pub/Wireless/DAP-1360/Description/Rev.D/ .
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
Default Settings
IP address of access point 192.168.0.50
Username (login) admin
Password admin
ame of wireless network (SSID) DAP-1360
System Requirements and Equipment
•A computer with any operating system that supports a web browser.
•A web browser to access the web-based interface of the access point:
Windows Internet Explorer, Mozilla Firefox, or Opera.
•A NIC (Ethernet or Wi-Fi adapter to connect to the access point.
•An 802.11b, g or n Wi-Fi adapter to create a wireless network.
2
DAP-1360 Quick Installation Guide
CO ECTI G TO PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between the LAN port located on the back
panel of the access point and the Ethernet port of your PC.
3. Connect the power cord to the power connector port on the back panel of
the access point, then plug the power adapter into an electrical outlet or
power strip.
4. Turn on your PC and wait until your operating system is completely
loaded.
Now you need to configure an IP address for the Ethernet adapter of your PC.
3
DAP-1360 Quick Installation Guide
Configuring IP Address in S Windows XP
1. Click the Start button and proceed to the Control Panel > etwork
and Internet Connections > etwork Connections window.
2. In the etwork Connections window, right-click the relevant Local
Area Connection icon and select the Properties line in the menu
displayed.
3. In the Local Area Connection Properties window, on the General
tab, select the Internet Protocol (TCP/IP) line. Click the Properties
button.
4
DAP-1360 Quick Installation Guide
4. Select the Use the following IP address radio button and enter the
value 198.168.0.51 in the IP address field. The Subnet mask
field will be filled in automatically. Click the OK button.
5. Click the ОК button in the connection properties window.
Now you can connect to the web-based interface of DAP-1360 for configuring
all needed parameters. To gain access to an external network (to the Internet ,
you also need to specify the default gateway and the addresses of DNS servers.
5
DAP-1360 Quick Installation Guide
Configuring IP Address in S Windows 7
1. Click the Start button and proceed to the Control Panel window.
2. Select the etwork and Sharing Center section. (If the Control Panel
has the category view (the Category value is selected from the View by
drop-down list in the top right corner of the window , choose the View
network status and tasks line under the etwork and Internet
section.
3. In the menu located on the left part of the window, select the Change
adapter settings line.
4. In the opened window, right-click the relevant Local Area Connection
icon and select the Properties line in the menu displayed.
5. In the Local Area Connection Properties window, on the
etworking tab, select the Internet Protocol Version 4 (TCP/IPv4)
line. Click the Properties button.
6
DAP-1360 Quick Installation Guide
6. Select the Use the following IP address radio button and enter the
value 198.168.0.51 in the IP address field. The Subnet mask
field will be filled in automatically. Click the OK button.
7. Click the OK button in the connection properties window.
Now you can connect to the web-based interface of DAP-1360 for configuring
all needed parameters. To gain access to an external network (to the Internet ,
you also need to specify the default gateway and the addresses of DNS servers.
7
DAP-1360 Quick Installation Guide
PC with Wi-Fi Adapter
1. Connect the power cord to the power connector port on the back panel of
the access point, then plug the power adapter into an electrical outlet or
power strip.
2. Turn on your PC and wait until your operating system is completely
loaded.
3. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in
wireless NICs are equipped with a button or switch that turns on/off the
wireless adapter (refer to your PC documents . If your PC is equipped
with a pluggable wireless NIC, install the software provided with your
Wi-Fi adapter.
Now you should configure your Wi-Fi adapter.
8
DAP-1360 Quick Installation Guide
Configuring Wi-Fi Adapter in S Windows XP
1. Click the Start button and proceed to the Control Panel > etwork
and Internet Connections > etwork Connections window.
2. In the etwork Connections window, right-click the relevant
Wireless etwork Connection icon. Make sure that your Wi-Fi
adapter is on, then select the Properties line in the menu displayed.
3. In the Wireless etwork Connection Properties window, on the
General tab, select the Internet Protocol (TCP/IP) line. Click the
Properties button.
4. Select the Use the following IP address radio button and enter the
value 198.168.0.51 in the IP address field. The Subnet mask
field will be filled in automatically. Click the OK button.
5. Click the ОК button in the connection properties window.
9
DAP-1360 Quick Installation Guide
6. Search for available wireless networks.
7. In the opened Wireless etwork Connection window, select the
wireless network DAP-1360 and click the Connect button.
After that the Wireless etwork Connection Status window appears.
Now you can connect to the web-based interface of DAP-1360 for configuring
all needed parameters. To gain access to an external network (to the Internet ,
you also need to specify the default gateway and the addresses of DNS servers.
!
If you perform initial configuration of the access point via Wi-Fi
connection, note that immediately after changing the wireless default
settings of the access point you will need to reconfigure the wireless
connection using the newly specified settings.
10
Autres manuels pour DAP-1360
13
Table des matières
Autres manuels D-Link Point d'accès sans fil
D-Link
D-Link DWL-1000AP+ Manuel utilisateur
D-Link
D-Link Rangebooster N 650 Access Point DAP-1353 Manuel utilisateur
D-Link
D-Link D DWL-8200AP DWL-8200AP Manuel utilisateur
D-Link
D-Link DWL-8720AP Manuel utilisateur
D-Link
D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access... Manuel utilisateur
D-Link
D-Link Rangebooster N 650 Access Point DAP-1353 Manuel utilisateur
D-Link
D-Link DWL-3200A Manuel utilisateur
D-Link
D-Link AirPremier DAP-2565 Manuel utilisateur
D-Link
D-Link AMPLIFI DAP-1525 Manuel utilisateur
D-Link
D-Link DBA-1510P Manuel utilisateur
D-Link
D-Link AirPremier N DAP-2360 Manuel utilisateur
D-Link
D-Link DWL-2700AP - AirPremier Outdoor Wireless Access... Manuel utilisateur
D-Link
D-Link D DWL-8200AP DWL-8200AP Manuel utilisateur
D-Link
D-Link DWL-7100AP Manuel utilisateur
D-Link
D-Link DWL-6700AP Manuel utilisateur
D-Link
D-Link DAP-1620 Manuel
D-Link
D-Link xtreme n duo dap-1522 Manuel utilisateur
D-Link
D-Link WL-7620AP Manuel utilisateur
D-Link
D-Link DAP-2610 Manuel utilisateur
D-Link
D-Link DWL-2700AP - AirPremier Outdoor Wireless Access... Manuel utilisateur
