D-Link KOMFY Manuel utilisateur

2. Remove Faceplate from Old Switch

Hot Wire (Live)

Required.

Neutral

Required, but not always

present.

STOP if you do not have it.

Ground

Oponal, and not always

present.

Load

Required. You need 2 loads

for 2-gang.

Ground

Oponal, and not always

present.

Neutral

Required, but not always

present.

STOP if you do not have it.

Load

Required. You need 1 load

for 1-gang.

Hot Wire (Live)

Required.

1- Gang

2- Gang

Take a picture for future reference

1. Turn O Circuit Breaker

Turn oﬀ the power to the light switch at the

main circuit breaker or fuse box.

Important: Flip your light switch a few

mes to ensure the power is oﬀ.

ONON

OFF OFF

OFF

Oponal, and not always

present.

Required, but not always

present.

STOP if you do not have it.

Required. You need 1 load

for 1-gang.

9. Attach Accessories

10.Congure Komfy Switch

Aach the included faceplate to the Komfy Switch and then put the Komfy

Switch cover with click pads over the faceplate.

Komfy Switch

Faceplate

Download the Komfy App and sign up for a Komfy account. Tap the “Add

Device” buon to complete the conﬁguraon.

Komfy Switch Cover

With Click Pads

If you want to remove the the switch

cover, pull out at the corners either at the

top or boom to remove it.

Komfy iSwitch with

Click Pads

Add Device

New User Exisng User

Add Device

3. Wire Labeling

Use the included wiring

labels and aach

the sckers to the

corresponding wires.

Green for “Ground”, white

for “Neutral”, black for

”Hot”, red for “Upper

Light” and brown for

“Lower Light”.

5. Wiring

Connect the wires from the Komfy Switch to the old switch wires.

1 - Gang

The unused wire

should be protected

by a wire nut.

Refer to Step 3 for

Color Wiring

Labeling

4. Remove Old Switch

Disconnect the old switch from the electrical box.

7. Turn On The Circuit Breaker

Turn the power back on at the circuit breaker or fuse box.

6. Attach Komfy Switch

1 - Gang:

2 middle screws

Screw the Komfy Switch into the electrical box and then slide the power

selector to 1 or 2. 1-gang and 2-gang have diﬀerent screws paerns as

shown below:

8. Press and Hold Setup Button for 5 Seconds

When the Wi-Fi LED lights up, press and hold the setup buon for 5

seconds unl the Wi-Fi LED starts blinking. When the Wi-Fi LED stops

blinking, the Komfy Switch is ready to be conﬁgured.

Slide power

selector to “1”.

Slide power

selector to “2”.

1 0 2

POWER

102

POWER

SETUP

2 - Gang:

4 side screws

Wall Light Switch Outlet

KOMFY

Contents

4 Screws

Wiring Labels

5 Wire Nuts

Komfy Switch

Faceplate

Komfy Switch Cover

with 2 Click Pads

by D-Link

Please read all the instrucons before you begin installaon. The Komfy

Switch is designed for installaon in standard electrical boxes and to be

installed in accordance with Naonal Fire Protecon Associaon

(NFPA 70). If you are not sure about any part of the instrucons, consult

a qualiﬁed electrician to perform the installaon.

1. Not compable with 3-way (mul-locaon control) switches.

2. Requires neutral wire (refer to Step 2).

Verify Switch Compability

Verify Wi-Fi Signal Strength

Hold your iPhone close to the switch you are replacing. Make sure

you have a good Wi-Fi signal there.

WARNING! Potenal Shock Hazard

Quick Installation Guide

Komfy Switch

by D-Link

Autres manuels D-Link Changer

D-Link

D-Link DES-3028 Manuel utilisateur

D-Link

D-Link DES-3226 Manuel utilisateur

D-Link

D-Link DWS-3024 Manuel utilisateur

D-Link

D-Link DGS-1210-10P Manuel utilisateur

D-Link

D-Link DKVM-2K Manuel utilisateur

D-Link

D-Link DGS-1005G Manuel utilisateur

D-Link

D-Link DUB-M910 Manuel utilisateur

D-Link

D-Link DES-3028 Manuel utilisateur

D-Link

D-Link DGS-3000-28SC Manuel utilisateur

D-Link

D-Link DES-1008PA Manuel utilisateur

D-Link

D-Link xStack DGS-3324SRi Manuel utilisateur

D-Link

D-Link DIR 601 - Dlink Wireless N 150 Home Router Manuel utilisateur

D-Link

D-Link DES-3250TG Manuel utilisateur

D-Link

D-Link xStack DGS-3620 Series Manuel utilisateur

D-Link

D-Link DGS-3000-28SC/A1A Manuel

D-Link

D-Link xStack DGS-3420-28SC Manuel utilisateur

D-Link

D-Link DKVM-IP8 Manuel utilisateur

D-Link

D-Link DMS-1250 Series Manuel

D-Link

D-Link DUB-H4 - Hub - USB Manuel utilisateur

D-Link

D-Link DES-1005E Manuel utilisateur

D-Link

D-Link DES-7200 Manuel

D-Link

D-Link DES-7200 Mode d’emploi

D-Link

D-Link DES-1252 - Web Smart Switch Manuel utilisateur

D-Link

D-Link DUB-H7 - Hub - USB Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur