D-Link DAS-3324 Manuel utilisateur

DAS-3 3 2 4 I P DSL AM

Q u i c k St a r t G u i d e

Version: 1.0

Date: 2006/07/10

D-Link Confidential 1

S-

-3

This quick start guide will guide you to finish the basic configuration for accessing Internet with

DAS-3324 IP DSLAM.



Above diagram shows the basic network topology (example) among DAS-3324 series device,

MDF, CPE (ATU-R) router and user’s computer. One thing is important – always set the

VPI/VCI value for the CPE the same as the ones configured in DAS-3324. The default

setting for VPI/VCI of IP DSLAM is 8/35. By the way, the values for these devices can be

changed (yet must match with CPE) if necessary. Please finish all the connections according

to the real situation of the environment for the devices.

Note: For DAS-3324 device, please use UP1or UP2 to access Internet with Ethernet

cable.



S-

-3

If users want to configure or monitor the devices, there are some methods provided here to

utilize. The UP/UP1/UP2 port on the DAS-3324 device allows you to make control remotely;

yet the Console port on the device only allows you to make control locally.

Note: If you are not used to configure the settings with terminal emulator software or

Telnet commands, you can use EMS (SNMP-based) software to manage these devices.

For the detailed information, please contact your dealer.

DAS-3324 can be managed via Console or Uplink Ports. It depends on your necessity.

D-Link Confidential 2



No matter what tool you would like to use for managing DAS-3324 device, the first thing

you have to do is making correct port connection.

Connect to a PC through UP port.

It is useful for controlling the

device remotely.

Connect to a PC through

CONSOLE port. It is useful for

controlling the device locally.

D-Link Confidential 3



How to Login with a Terminal Emulator Software

1.The default setting is “baud rate 9600, no parity, and 8

bit with 1 stop bit (N,8,1)”.

2.Use any terminal emulator software for executing

commands.

Username – admin;

Password - 1234

How to Check the Version Information

To display the DSL module

information inside the device

The results

1. Login the specified DSL

module.

2. Type the following command to

get the DSL module information

$get system info

You will get the following results:

How to Save the Configuration

To save the configuration for the DSL module

Type the following command to save the

configuration. Next time, the saved configuration will

be invoked after powering on the device.

$commit

D-Link Confidential 4



To use Telnet for managing DAS-3324 device, refer to the following sections.

Default IP Settings for Slave Device

Proprietary DHCP is configured on UPLINK port in

the device by default. The IP address will be assigned

automatically when it connects to the DHCP server.

How to Configure IP Address for Slave-Standalone Device

There are two types of DAS-3324 device that user might have. One is the device with two fast-ethernet

interface version; the other is the device with one gigabit-ethernet interface version.

For two fast-ethernet interface version, please set as the following

$aggr intf ifname aggr-0 ip <new-ip> mask <mask> usedhcp false

For one gigabit-ethernet interface version, please set as the following

$ethernet intf ifname eth-0 ip <new-ip> mask <mask> usedhcp false

How to Login with Telnet

1.Make sure the device IP has been configured well.

2.Make sure the connection of UPLINK port is well

done.

3.Open Telnet command screen.

4.Username/Password

admin/1234

(type ‘exit’ to return)

Now, please use Telnet commands to manage the DAS-3324 device for your necessity.

D-Link Confidential 5



–

Here provides some general and common commands used in IP DSLAM for users to

configure the IP DSLAM DSL Module.

Note: Please refer to the Command Line Interface manual for getting more commands

that IP DSLAM supports. Contact your dealer for advanced information.

How to Monitor DSL Status

Users can use the following command to check the status for specified DSL port. The commands are listed as

below.

Command Description

$get adsl atuc physical ifname dsl-*

for downstream (*: 0 ~ 23)

$get adsl atur physical ifname dsl-*

for upstream (*: 0 ~ 23)

How to Enable/Disable a DSL Port

Users can use the following command to enable or disable DSL port for certain user. The commands are

listed as below.

Command Description

$modify adsl line intf ifname dsl-* enable

Enable (*: 0 ~ 23)

$modify adsl line intf ifname dsl-* disable

Disable (*: 0 ~ 23)

How to Read DSL Training Rate

Users can use the following command to read DSL Training Rate for specified DSL port. The commands are

listed as below.

Command Description

$get adsl atuc channel ifname dsli-*

for downstream/interleave channel (*: 0 ~ 23)

$get adsl atur channel ifname dslf-*

for upstream/fast channel (*: 0 ~ 23)

$get adsl atuc channel ifname dsli-*

for downstream/interleave channel (*: 0 ~ 23)

$get adsl atur channel ifname dslf-*

for upstream/fast channel (*: 0 ~ 23)



D-Link Confidential 6

How to Change ADSL Line Profile

Users can use the following command to change the ADSL Line Profile for specified DSL port. The

commands are listed as below.

Command Description

$modify adsl line intf ifname dsl-* disable

Disable (*: 0 ~ 23)

$modify adsl line profile ifname dsl-* ?

(*: 0 ~ 23, ?: means to get more information)

$modify adsl line intf ifname dsl-* enable

Enable (*: 0 ~ 23)

How to Change ADSL Line Rate

Users can use the following command to change the ADSL Line Rate for specified DSL port. The commands

are listed as below.

Command Description

$modify adsl line intf ifname dsl-* disable

Disable (*: 0 ~ 23)

$modify adsl line profile ifname dsl-*

atucintlmaxtxrate 0x7e0000

Necessary variables (*: 0 ~ 23)

$modify adsl line intf ifname dsl-* enable

Enable (*: 0 ~ 23)

How to Change ADSL to Fast Channel/Rate

Users can use the following command to change the ADSL to fast channel/rate for specified DSL port. The

commands are listed as below.

Command Description

$modify adsl line intf ifname dsl-* disable

Disable (*: 0 ~ 23)

$modify adsl line profile ifname dsl-

* type

fastOnly atucfastmaxtxrate 0x7e0000

Necessary variables (*: 0 ~ 23)

$modify adsl line intf ifname dsl-* enable

Enable (*: 0 ~ 23)



D-Link Confidential 7

How to Set ADSL Alarm Profile

Users can use the following command to change the ADSLAlarm profile for specified DSL port. The

commands are listed as below.

Command Description

$modify adsl line intf ifname dsl-* disable

Disable (*: 0 ~ 23)

$modify adsl alarm profile ifname dsl-*

(*: 0 ~ 23, ?: means to get more information)

$modify adsl line intf ifname dsl-* enable

Enable (*: 0 ~ 23)

How to Change VPI/VCI for Existing VCC

Users can use the following command to change VPI/VCI for existing VCC. The commands are listed as

below.

Command Description

$modify atm vc intf ifname aal5-* disable

Disable (*: Existing aal5 interface)

$modify atm vc intf ifname aal5-* vpi

<new-vpi> vci <new-vci>

(*: Existing aal5 interface)

$modify atm vc intf ifname aal5-* enable

Enable (*: Existing aal5 interface)

How to Change Management IP Address for Existing Ethernet

Port

Users can use the following command to change management IP address for existing Ethernet port. The

commands are listed as below.

Command Description

$modify aggr intf ifname aggr-0 ip <new-

ip>

mask <new-mask>

Aggregation Ethernet

$modify ethernet intf ifname eth-* ip

<new-ip> mask <new-mask>

Non-Aggregation Ethernet

(*: 0 or 1)

How to Create more VC/EOA/Bridge

Users can use the following command to create more VC/EOA/Bridge. The commands are listed as below.

Command Description

$create atm vc intf ifname aal5-

* vpi <vpi>

vci <vci> lowif atm-* [vcmux/llcmux]

[fast/interleaved]

(*:0 ~ 23 is used for atm; 0~191 is used for aal5)

$create eoa intf ifname eoa-* lowif aal5-*

(*:0~191 is used for aal5 and eoa)

$create bridge port intf portid

<bridge-port-id> ifname eoa-*

(*:0~191 is used for eoa,; 1~192 is used for

<bridge-port-id>)

D-Link Confidential 8



How to Setup SNMP Community/Host/Trap

Users can use the following command to setup SNMP community/host/trap. The commands are listed as

below.

Command Description

$create snmp comm community <community>

<RW|RO>

Create SNMP community

$create snmp host ip <host-

ip> community

Create a host to manage the device through SNMP

$create snmp traphost ip <host-ip>

community <community>

Create a host to capture the traps.

How to Create VLAN

Users can use the following command to create VLAN. The commands are listed as below.

Command Description

$create vlan static vlanname <vlan-

name>

valnid <vlan-id> [egressports <bridge

ports>]

Create VLAN

Table des matières

Autres manuels D-Link Changer

D-Link

D-Link KVM-222 Manuel utilisateur

D-Link

D-Link mydlink Smart Plug Lite Manuel utilisateur

D-Link

D-Link xStack Manuel

D-Link

D-Link DGS-1216T - Switch Manuel utilisateur

D-Link

D-Link DGS-1250 Series Manuel

D-Link

D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manuel utilisateur

D-Link

D-Link DFE-904 Manuel utilisateur

D-Link

D-Link DGS-1008P Manuel utilisateur

D-Link

D-Link DGS-1210-10 Manuel utilisateur

D-Link

D-Link DES-3326SR Manuel utilisateur

D-Link

D-Link DES-3028 Manuel utilisateur

D-Link

D-Link DUB-1370 Manuel utilisateur

D-Link

D-Link DSB-650TX Manuel utilisateur

D-Link

D-Link DUB-1340 Manuel utilisateur

D-Link

D-Link DGS-1100-10MP Manuel utilisateur

D-Link

D-Link DKVM-4U Manuel utilisateur

D-Link

D-Link DGS-1210-10MP/FL Manuel utilisateur

D-Link

D-Link xStack DGS-3620 Series Manuel utilisateur

D-Link

D-Link DGS-1216T - Switch Manuel utilisateur

D-Link

D-Link DUB-104 Manuel utilisateur

D-Link

D-Link DES-1008G Manuel utilisateur

D-Link

D-Link DES-3852 - xStack Switch - Stackable Manuel utilisateur

D-Link

D-Link KVM-221 2 Manuel utilisateur

D-Link

D-Link DGS-1005G Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur