D-Link EasySmart DGS-1100-05 Manuel utilisateur

1Product Introduction D-Link Smart Managed Switch User Manual

1 Product Introduction

Thank you and congratulations on the purchase of your new D-Link Smart Managed Switch.

D-Link's next generation Smart Managed switch series blends plug-and-play simplicity with exceptional

value and reliability for small and medium-sized business (SMB) networking. All models are housed in a

robust metal case with easy-to-view front panel diagnostic LEDs.

Flexible Port Configurations. The DGS-1100 series is the new generation of Smart Managed Switches,

featuring 5 to 8 10/100/1000 Mbps.

D-Link Green Technology. The DGS-1100 Series features D-Link Green Technology which helps

conserve power without sacrificing operational performance. Using IEEE 802.3az Energy Efficient Ethernet

(EEE), the DGS-1100 Series saves power by automatically putting inactive ports into a sleep mode.

Extensive Layer 2 Features. Designed as comprehensive L2 devices, these switches support a variety of

functions such as FDB, VLAN, Spanning Tree, and Loopback Detection to enhance performance and

network resilience.

Traffic Segmentation and QoS.The switches support 802.1Q VLAN standard tagging to enhance network

security and performance. The switches also support 802.1p priority queues, enabling users to run

bandwidth-sensitive applications such as streaming multimedia by prioritizing that traffic in network. The

Surveillance VLAN will place the video traffic from pre-defined IP surveillance devices to an assigned VLAN

with higher priority, so it can be separated from normal data traffic.

Network Security. Storm Control can help to keep the network from being overwhelmed by abnormal

traffic. Meanwhile, Port Security provides administrators with an additional layer of security to prevent

unauthorized users from accessing the network.

Versatile Management. The DGS-1100-05/05PD/08/08PD feature an intuitive, web-based management

interface that allows administrators to remotely control their network down to the port level. The D-Link

Network Assistant (DNA) easily allows administrators to discover multiple D-Link Smart Managed Switches

within the same L2 network segment and display them on-screen for instant access. With this utility, users

do not need to change the IP address of their PC. This allows for simultaneous configuration and basic

setup of all discovered devices, including password changes and firmware upgrades.

DGS-1100-05

5-Port 10/100/1000Mbps Smart Managed Switch.

Front Panel

Figure 1.1 – DGS-1100-05 Front Panel

Power LED: The Power LED lights up when the Switch is connected to a power source.

Link/Act/Speed LED (Ports 1-5): 10/100/1000 Mbps ports to connect Ethernet devices to the switch.

1 Product Introduction D-Link Smart Managed Switch User Manual

Rear Panel

Figure 1.2 – DGS-1100-05 Rear Panel

Power: Input for a 5V/1A AC adapter.

Reset: Press the Reset button for 1 to 5 seconds to reboot the Switch. Press the Reset button for 6 to10

seconds to reset the Switch back to the default settings. The LED will light up solid amber for 2 seconds.

When pressing the Reset button for longer than 10 seconds, the device will enter loader mode and the LED

will light up solid green for 2 seconds. If the device cannot reboot, it will automatically enter loader mode.

Alternatively, you can press Reset to power up the device and enter loader mode.

Kensington Lock: This is used to attach a physical Kensington security lock.

GND: This is used to connect the Switch to ground.

DGS-1100-05PD

2-Port 10/100/1000Mbps PoE and 3-Port 10/100/1000Mbps with 1 PD port Smart Managed Switch.

Front Panel

Figure 1.3 – DGS-1100-05PD Front Panel

Power LED: The Power LED lights up when the Switch is connected to a power source. If the Power LED is

Blinking, PoE Pass Through is Off.

Link/Act/Speed LED (Ports 1-5):

Flashing: Indicates a network link through the corresponding port.

Blinking: Indicates that the Switch is either sending or receiving data to the port.

Green: Indicates that the port is running at 1000M.

Amber: Indicates that the port is running at 10/100M.

Light off: No link.

PoE PSE LED (Port 1-2):

Solid Green: PD device insert and power feeding.

Solid Amber: PD device insert but failure occurs.

Light off: No PD device insert.

PoE PD (Port 5):

Solid Green: Receiving power from PSE per 802.3at.

Solid Amber: Receiving power from PSE per PSE.

Light off: No link.

Reset: Press the Reset button for 1 to 5 seconds to reboot the Switch. Press the Reset button for 6 to10

seconds to reset the Switch back to the default settings. The LED will light up solid amber for 2 seconds.

When pressing the Reset button for longer than 10 seconds, the device will enter loader mode and the LED

will light up solid green for 2 seconds. If the device cannot reboot, it will automatically enter loader mode.

Alternatively, you can press Reset to power up the device and enter loader mode.

1Product Introduction D-Link Smart Managed Switch User Manual

Rear Panel

Figure 1.4 – DGS-1100-05PD Rear Panel

Power: Use RJ45 to connect the PD port (port 5) and Power over Ethernet Adapter Kit.

Kensington Lock: This is used to attach a physical Kensington security lock.

GND: This is used to connect the Switch to ground.

NOTE: The power budget is 18 Watts with 802.3at and 8 Watts with

802.3af for DGS-1100-05PD.

DGS-1100-08

8-Port 10/100/1000Mbps Smart Managed Switch.

Front Panel

Figure 1.5 – DGS-1100-08 Front Panel

Power LED: The Power LED lights up when the Switch is connected to a power source.

Link/Act/Speed LED (Ports 1-8): 10/100/1000 Mbps ports to connect Ethernet devices to the switch.

Rear Panel

Figure 1.6 – DGS-1100-08 Rear Panel

Power: Input for a 5V/1A AC adapter.

Reset: Press the Reset button for 1 to 5 seconds to reboot the Switch. Press the Reset button for 6 to10

seconds to reset the Switch back to the default settings. The LED will light up solid amber for 2 seconds.

When pressing the Reset button for longer than 10 seconds, the device will enter loader mode and the LED

will light up solid green for 2 seconds. If the device cannot reboot, it will automatically enter loader mode.

Alternatively, you can press Reset to power up the device and enter loader mode.

Kensington Lock: This is used to attach a physical Kensington security lock.

GND: This is used to connect the Switch to ground.

DGS-1100-08P

8-Port 10/100/1000Mbps PoE Smart Managed Switch.

1 Product Introduction D-Link Smart Managed Switch User Manual

Front Panel

Figure 1.7 – DGS-1100-08P Front Panel

Power LED: The Power LED lights up when the Switch is connected to a power source.

Reset: Press the Reset button for 1 to 5 seconds to reboot the Switch. Press the Reset button for 6 to10

seconds to reset the Switch back to the default settings. The LED will light up solid amber for 2 seconds.

When pressing the Reset button for longer than 10 seconds, the device will enter loader mode and the LED

will light up solid green for 2 seconds. If the device cannot reboot, it will automatically enter loader mode.

Alternatively, you can press Reset to power up the device and enter loader mode.

Link/Act/Speed LED (Ports 1-8):

Flashing: Indicates a network link through the corresponding port.

Blinking: Indicates that the Switch is either sending or receiving data to the port.

Green: Indicates that the port is running at 1000M.

Amber: Indicates that the port is running at 10/100M.

Light off: No link.

PoE MAX. LED:

Light up: Indicates the power output to PDs is over 57W. No additional PDs can be powered for

safety consideration.

Blinking: Indicates if the user unplugged certain PDs and made the PoE power budget left over 7W,

the PoE MAX LED will blink 5 seconds.

Light off: Indicates the power budget is using less than 57W.

PoE LED (Ports 1-8):

Green: Indicates the PoE powered device (PD) is connected and the port supplies power

successfully.

Red: The PoE port has failed, possibly due to:

1. PoE total power budget shortage.

2. Over current: Exceeds the power current of powered device's classification.

3. Short circuit: Short circuit has been performed on a powered device.

Light off: Indicates no Powered Device (PD) connected.

PoE Mode LED (Port 1-8):

Solid Green: PD device insert and power feeding.

Solid Amber: PD device insert but failure occurs.

Light off: No PD device insert.

Rear Panel

Figure 1.8 – DGS-1100-08P Rear Panel

Power: Input for a 54V/1.574A AC adapter.

Kensington Lock: This is used to attach a physical Kensington security lock.

GND: This is used to connect the Switch to ground.

1Product Introduction D-Link Smart Managed Switch User Manual

NOTE: The power budget is 64 Watts for DGS-1100-08P.

LED Indicators

The Switches feature LED indicators for Power and Link/Act for each port. The following shows the LED

indicators for the DGS-1100-05/05PD/08/08PD switches along with an explanation of each indicator.

Figure 1.9 –LED Indicators on DGS-1100 series

Location Indicator LED Color Status Description

Per Device

Power Green

Solid Light The device is powered on.

Blinking PoE Pass Through Off (DGS-1100-

05PD only)

Light off The device is powered off.

PoE Max.

(Only DGS-1100-

08P) Red

Solid Light

When the power output to PDs is over

57W. No additional PDs can be

powered for safety consideration.

Blinking

If the user unplugged certain PDs and

made the PoE power budget left over

7W, the PoE MAX LED will blink 5

seconds.

Light off

When the power budget is using less

the 57W.

LED Per

10/100/1000

Mbps Port Link/Act/Speed Green/Amber

Solid Green

Indicates there is a 1000 Mbps

connection on this port.

Blinking

Green

Indicates data is being processed on

this port at 1000 Mbps.

Solid Amber

Indicates there is a 10/100 Mbps

connection on this port.

Blinking

Amber

Indicates data is being processed on

this port at 10/100 Mbps.

Light off

Indicates there is no active link on this

port.

LED Per PoE Port

PoE Status Green/Amber

Solid Green PD device insert and power feeding.

Solid Amber

PD device insert but failure occurs.

(PSE can’

t provide power to PD due to

PD error or power budget is not

enough.)

Light off No PD device inserts.

LED Per PD Port

(DGS-1100-05PD

only) PD Status Green/Amber Solid Green Receiving power from PSE per 802.3at

Solid Amber

Receiving power from PSE per PSE.

1 Product Introduction D-Link Smart Managed Switch User Manual

Light off No link.

Autres manuels pour EasySmart DGS-1100-05

Ce manuel convient aux modèles suivants

Autres manuels D-Link Changer

D-Link

D-Link DQS-5000-32Q28 Manuel utilisateur

D-Link

D-Link xStack DGS-3427 Manuel utilisateur

D-Link

D-Link DES-1050G Manuel utilisateur

D-Link

D-Link DES-1005D Manuel utilisateur

D-Link

D-Link DES-3224 - Switch Manuel utilisateur

D-Link

D-Link DGS-3224TGR - Switch Manuel utilisateur

D-Link

D-Link DIS-100G-10S Manuel utilisateur

D-Link

D-Link DGS-1210/ME series Manuel

D-Link

D-Link DES-3010FA Manuel utilisateur

D-Link

D-Link KOMFY Manuel utilisateur

D-Link

D-Link DUB-H4 - Hub - USB Manuel utilisateur

D-Link

D-Link DES-3528 - xStack Switch - Stackable Manuel

D-Link

D-Link DXS-3600 Series Manuel utilisateur

D-Link

D-Link DGS-1005A Manuel utilisateur

D-Link

D-Link DES-6000 Series Instructions de montage

D-Link

D-Link SmartPro DGS-1500-20 Manuel utilisateur

D-Link

D-Link DXS-1100-16SC Manuel utilisateur

D-Link

D-Link DSD-150 - SecureSpot Internet Security... Manuel utilisateur

D-Link

D-Link DES-1005E Manuel utilisateur

D-Link

D-Link DUB-H7 - Hub - USB Manuel utilisateur

D-Link

D-Link DGS-1008P Manuel utilisateur

D-Link

D-Link DSS-100 Manuel utilisateur

D-Link

D-Link DI-707 Manuel utilisateur

D-Link

D-Link DES-3250TG Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur