D-Link DUB-H4 - Hub - USB Manuel utilisateur

This Installation Guide includes instructions for:

§Windows XP

§Windows 2000

§Windows Me

§Windows 98/98SE

§Macintosh OS 8/9

§Macintosh OS X/10

Installation Guide Contents:

Section 1:Installing the DUB-H4

Section 2:LED Indicators

Section 3:Tips and Technical Support

Package Contents:

Verify that your D-Link DUB-H4 package contains the following items. If

any items are missing,please contact your reseller.

§D-Link DUB-H4

§USB 2.0 Cable

§AC Power Adapter

Minimum System Requirements:

For proper usage, you must have the following at a minimum...

§Pentium 233-MHz or faster or equivalent with 32MB RAM

§Available USB 1.1 Port For USB 1.1 Operation

§Available USB 2.0 Port For USB 2.0 Operation

§Windows XP, 2000, Me, 98, 98SE,Mac OS 8, 9, or 10/X for USB 1.1

Operation

§Windows XP, 2000, Me, 98, 98 SEor Mac OS X for USB 2.0

Operation

D-Link DUB-H4

Hi-Speed USB 2.0 4-Port Hub

Installation Guide

Installing the DUB-H4

A. Plug the USB type B connector

(the larger end of the cable) into

the back of the DUB-H4.

B. Plug the AC adapter into the

DUB-H4 and into a power

socket in a power-strip or a wall

jack.

C. Plug the USB type A connector

(the narrow end of the cable)

into an available USB 2.0 port

on your computer (or USB 1.1

if you don’t have USB 2.0).

D. Your computer will automatically detect and install the DUB-H4.

You may now connect USB 2.0 or USB 1.1 devices to an available

USB port on the front of the DUB-H4.

Type A

Type

LED Indicators

The DUB-H4 features five LED indicators…

§The Power LED indicator is red and lights up when the DUB-H4 is

powered on by using the external power adapter. The DUB-H4 does

not run on power supplied from the computer (bus powered).

§The downstream LED indicators are green. Each port has one status

LED. The LED lights to indicate that the port is working.

§If a port becomes overloaded, a “current exceeded” event will take

place. The LED of the port will go off and the message “USB HUB

Current Limit Exceeded” appears on the monitor. Reset the DUB-H4

by disconnecting it for 5 seconds and then powering it back on by

connecting the AC power adapter.

LED Color Indicator

Power Red Power is on

Power Off Power is off

Downstream

Green Port is working

Downstream

Off Port is not working

Tips and Technical Support

Tips

§When connecting USB cables betweenUSB devices and the DUB-

H4, make sure that the cable is connected securely.

§Remember that when connecting USB 1.1 devices to a USB 2.0 hub

or host adapter, the USB 1.1 device will not work at USB 2.0 speeds.

§The DUB-H4 does not have an on/off switch. It is always on, once the

external power adapter has been plugged into a wall socket or power

source.

§Connecting USB 1.1 devices to the DUB-H4 may cause all USB

devices connected to the hub to work at USB 1.1 speed. To ensure

480Mbps throughput for your USB 2.0devices, don’t connect USB

1.1 and USB 2.0 devices to the hub at the same time.

§D-Link recommends that while using a USB device that includes an

AC power adapter, that you use the power adapter to ensure proper

power and current supply to that device.

§Please remember to unplug devices properly to ensure that no data

loss or corruption takes place with your operating system.

Technical Support

D-Link provides free technical support for customers within the United

States during the warranty period. U.S. customers can contact D-Link

Technical Support through our web site, e-mail or by phone.

D-Link Technical Support over Telephone:

§1-800-758-5489

§24 Hours a Day, 7 Days a Week

D-Link Technical Support over the Internet:

§support.dlink.com

§[email protected]

Autres manuels pour DUB-H4 - Hub - USB

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels D-Link Changer

D-Link

D-Link DKVM-4U Manuel utilisateur

D-Link

D-Link DES-105 Manuel utilisateur

D-Link

D-Link DES-1009G Manuel utilisateur

D-Link

D-Link xStack DGS-3627 series Manuel utilisateur

D-Link

D-Link DWS-3227P - xStack Switch - Stackable Manuel utilisateur

D-Link

D-Link DUB-H7 - Hub - USB Manuel utilisateur

D-Link

D-Link DGS-1024D - Switch Manuel utilisateur

D-Link

D-Link DES-1228 - Web Smart Switch Manuel utilisateur

D-Link

D-Link DGS-2208 - Desktop Switch Manuel utilisateur

D-Link

D-Link DE-1824EI Manuel utilisateur

D-Link

D-Link EasySmart DGS-1100-05 Manuel utilisateur

D-Link

D-Link DUB-9240 - UWB Wireless USB Manuel utilisateur

D-Link

D-Link DGS-1052 Manuel utilisateur

D-Link

D-Link DES-2108 Manuel utilisateur

D-Link

D-Link Dis-200G Series Manuel utilisateur

D-Link

D-Link DGS-1210-52/FL Manuel utilisateur

D-Link

D-Link DGS-1005A Manuel utilisateur

D-Link

D-Link DES-3226L Manuel utilisateur

D-Link

D-Link DES-3528 - xStack Switch - Stackable Manuel

D-Link

D-Link DGS-1005D - Switch Manuel utilisateur

D-Link

D-Link DES-1016D - Switch Manuel utilisateur

D-Link

D-Link DUB-H7 - Hub - USB Manuel utilisateur

D-Link

D-Link DES-F1010P-E Manuel utilisateur

D-Link

D-Link DUB-H4 - Hub - USB Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur